lkml.org 
[lkml]   [2014]   [Aug]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2] doc: dt/bindings: input: introduce TI DRV2667 haptic driver description
On 08/21/2014 11:14 PM, Murphy, Dan wrote:

[...]

>>> DRV2667 is a haptic/vibrator driver for Linear Resonant Actuators.
>>> Adding dt binding for this part

>>> Signed-off-by: Dan Murphy <dmurphy@ti.com>
>>> ---
>>> .../devicetree/bindings/input/ti,drv2667.txt | 18 ++++++++++++++++++
>>> 1 file changed, 18 insertions(+)
>>> create mode 100644 Documentation/devicetree/bindings/input/ti,drv2667.txt

>>> diff --git a/Documentation/devicetree/bindings/input/ti,drv2667.txt b/Documentation/devicetree/bindings/input/ti,drv2667.txt
>>> new file mode 100644
>>> index 0000000..525216d
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/input/ti,drv2667.txt
>>> @@ -0,0 +1,18 @@
>>> +Texas Instruments - drv2667 Haptics driver
>>> +
>>> +The drv2667 uses serial control bus communicates through I2C protocols
>>> +
>>> +Required properties:
>>> + - compatible - "ti,drv2667" - DRV2667
>>> + - reg - I2C slave address
>>> + - vbat-supply - Required supply regulator
>>> +
>>> +Example:
>>> +
>>> +drv2667: drv2667@59 {

>> The ePAPR standard [1] has something to say on this matter:

> What is this reference? Did not know this existed so wanted to read up on it.

Sorry, forgot to paste the link. :-<

[1] http://www.power.org/resources/downloads/Power_ePAPR_APPROVED_v1.0.pdf

WBR, Sergei



\
 
 \ /
  Last update: 2014-08-21 21:41    [W:0.040 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site