Messages in this thread | | | From | "Murphy, Dan" <> | Subject | Re: [PATCH 1/2] doc: dt/bindings: input: introduce TI DRV2667 haptic driver description | Date | Thu, 21 Aug 2014 18:30:40 +0000 |
| |
Sergei
On 08/21/2014 01:29 PM, Sergei Shtylyov wrote: > Hello. > > On 08/21/2014 10:19 PM, Dan Murphy wrote: > >> DRV2667 is a haptic/vibrator driver for Linear Resonant Actuators. >> Adding dt binding for this part > >> Signed-off-by: Dan Murphy <dmurphy@ti.com> >> --- >> .../devicetree/bindings/input/ti,drv2667.txt | 18 ++++++++++++++++++ >> 1 file changed, 18 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/input/ti,drv2667.txt > >> diff --git a/Documentation/devicetree/bindings/input/ti,drv2667.txt b/Documentation/devicetree/bindings/input/ti,drv2667.txt >> new file mode 100644 >> index 0000000..525216d >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/input/ti,drv2667.txt >> @@ -0,0 +1,18 @@ >> +Texas Instruments - drv2667 Haptics driver >> + >> +The drv2667 uses serial control bus communicates through I2C protocols > > I can't parse that. >
Hmmm.. It made sense when I typed it. Will fix
>> + >> +Required properties: >> + - compatible - "ti,drv2667" - DRV2667 >> + - reg - I2C slave address >> + - vbat-supply - Required supply regulator >> + >> +Example: >> + >> +drv2667: drv2667@59 { >> + compatible = "ti,drv2667"; >> + reg = <0x59>; > > You say "vbat-supply" is mandatory, yet you don't have it in your example?
I will add this as well.
> > WBR, Sergei > >
-- ------------------ Dan Murphy
| |