lkml.org 
[lkml]   [2014]   [May]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] bluetooth: raise HCI_CMD_TIMEOUT from 2s to 8s
Am 31.05.2014 07:32, schrieb Marcel Holtmann:
> Hi Alexander,
>
>> The reasoning to do this is the following:
>>
>> - If a timeout occurs, the HCI-communication is broken afterwards and the
>> dongle isn't usable anymore.
>> - If it works after e.g. waiting 4s everyone is still happy but if it
>> just breaks after only waiting 2s nothing is gained.
>> - Having to wait some more seconds until an error occurs doesn't change
>> anything.
>>
>> So there is no disadvantage in rasing the timeout but a great advantage
>> in case the dongle needs more than 2s to process an HCI command.
>> E.g. I had sometimes HCI command timeouts at boot (but never after the BT stack
>> was successfull started). I assume the reason might be the USB-probing which
>> happend before through the bootloader, which might have confused the dongle
>> such that it needs a bit more time, but I'm not sure.
>>
>> Together with the patch which limits the timeout only to the actual time the
>> dongle needs to process an HCI command (and doesn't include the time the
>> kernel needs to process the answer to an HCI command), my problems were gone.
>>
>> Signed-off-by: Alexander Holler <holler@ahsoftware.de>
>> ---
>> include/net/bluetooth/hci.h | 2 +-
>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
>> index be150cf..d50fd34 100644
>> --- a/include/net/bluetooth/hci.h
>> +++ b/include/net/bluetooth/hci.h
>> @@ -180,7 +180,7 @@ enum {
>> #define HCI_DISCONN_TIMEOUT msecs_to_jiffies(2000) /* 2 seconds */
>> #define HCI_PAIRING_TIMEOUT msecs_to_jiffies(60000) /* 60 seconds */
>> #define HCI_INIT_TIMEOUT msecs_to_jiffies(10000) /* 10 seconds */
>> -#define HCI_CMD_TIMEOUT msecs_to_jiffies(2000) /* 2 seconds */
>> +#define HCI_CMD_TIMEOUT msecs_to_jiffies(8000) /* 8 seconds */
>> #define HCI_ACL_TX_TIMEOUT msecs_to_jiffies(45000) /* 45 seconds */
>> #define HCI_AUTO_OFF_TIMEOUT msecs_to_jiffies(2000) /* 2 seconds */
>> #define HCI_POWER_OFF_TIMEOUT msecs_to_jiffies(5000) /* 5 seconds */
>
> I think moving the command timeout handling into a delayed work struct might actually solve this problem nicely and does not force us to increase the timeout. A chip that does not respond for 8 seconds is a pretty bad chip.

As I said in another mail, I don't think it is the chip. On the system
where I'm experiencing these timeouts there's still the USB-subsysten
inbetween. And this system boots from USB too, which means there's a lot
of other traffic on the USB-bus besides the one for the USB-BT-dongle.
And I don't know how the USB-stack (and hw) schedules the traffic, if he
is able to schedule that at all.

Regards,

Alexander


\
 
 \ /
  Last update: 2014-05-31 09:21    [W:0.123 / U:0.192 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site