lkml.org 
[lkml]   [2014]   [May]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 2/2] bluetooth: raise HCI_CMD_TIMEOUT from 2s to 8s
From
Hi Alexander,

On Wed, May 14, 2014 at 5:00 PM, Alexander Holler <holler@ahsoftware.de> wrote:
> The reasoning to do this is the following:
>
> - If a timeout occurs, the HCI-communication is broken afterwards and the
> dongle isn't usable anymore.
> - If it works after e.g. waiting 4s everyone is still happy but if it
> just breaks after only waiting 2s nothing is gained.
> - Having to wait some more seconds until an error occurs doesn't change
> anything.
>
> So there is no disadvantage in rasing the timeout but a great advantage
> in case the dongle needs more than 2s to process an HCI command.
> E.g. I had sometimes HCI command timeouts at boot (but never after the BT stack
> was successfull started). I assume the reason might be the USB-probing which
> happend before through the bootloader, which might have confused the dongle
> such that it needs a bit more time, but I'm not sure.
>
> Together with the patch which limits the timeout only to the actual time the
> dongle needs to process an HCI command (and doesn't include the time the
> kernel needs to process the answer to an HCI command), my problems were gone.
>
> Signed-off-by: Alexander Holler <holler@ahsoftware.de>
> ---
> include/net/bluetooth/hci.h | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
> index be150cf..d50fd34 100644
> --- a/include/net/bluetooth/hci.h
> +++ b/include/net/bluetooth/hci.h
> @@ -180,7 +180,7 @@ enum {
> #define HCI_DISCONN_TIMEOUT msecs_to_jiffies(2000) /* 2 seconds */
> #define HCI_PAIRING_TIMEOUT msecs_to_jiffies(60000) /* 60 seconds */
> #define HCI_INIT_TIMEOUT msecs_to_jiffies(10000) /* 10 seconds */
> -#define HCI_CMD_TIMEOUT msecs_to_jiffies(2000) /* 2 seconds */
> +#define HCI_CMD_TIMEOUT msecs_to_jiffies(8000) /* 8 seconds */
> #define HCI_ACL_TX_TIMEOUT msecs_to_jiffies(45000) /* 45 seconds */
> #define HCI_AUTO_OFF_TIMEOUT msecs_to_jiffies(2000) /* 2 seconds */
> #define HCI_POWER_OFF_TIMEOUT msecs_to_jiffies(5000) /* 5 seconds */
> --
> 1.8.3.1

This timeout seems arbitrary so I suppose we can increase it if we
feel it is necessary but we used already different timeout for
different commands like HCI_POWER_OFF_TIMEOUT, so perhaps if we can
identify which command is more likely to timeout.

We could perhaps auto reset if a command timeout if there is really no
other way to recover.


--
Luiz Augusto von Dentz


\
 
 \ /
  Last update: 2014-05-15 15:41    [W:0.103 / U:0.988 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site