lkml.org 
[lkml]   [2013]   [May]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/4] Export the ecc step size to user applications
Date
In order to implement the NAND boot for some Freescale's chips, such as
imx23/imx28/imx50/imx6, we use a tool (called kobs-ng) to burn the uboot
and some metadata to nand chip. And the ROM code will use the metadata to
configrate the BCH, and to find the uboot.

The ECC information(ecc step size, ecc strength) which is used to configrate
the BCH is part of the metadata. The kobs-ng can gets the ecc strength from
the sys node /sys/*/mtdX/ecc_strength now. But it can't gets the ecc step size.

This patch set is used to export the ecc step size to user applications.
With this patch set, the kobs-ng can gets the ecc step size now.


Huang Shijie (4):
mtd: add a new field to mtd_info{}
mtd: add a new sys node to show the ecc step size
mtd: set the ecc step size for master/slave mtd_info
mtd: gpmi: update the ecc step size for mtd_info{}

drivers/mtd/mtdcore.c | 11 +++++++++++
drivers/mtd/mtdpart.c | 1 +
drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 1 +
drivers/mtd/nand/nand_base.c | 1 +
include/linux/mtd/mtd.h | 3 +++
5 files changed, 17 insertions(+), 0 deletions(-)




\
 
 \ /
  Last update: 2013-05-03 09:21    [W:0.049 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site