lkml.org 
[lkml]   [2013]   [Oct]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 05/10] ARM: dts: omap3-beagle: Use reset-gpios for hsusb2_reset
On 03/10/2013 14:05, Benoit Cousson wrote:
> Hi Roger,
>
> Yes, I will. I've been waiting for these ones for so long :-)

In fact it does not apply correctly on my for_3.13/dts branch :-(

error: arch/arm/boot/dts/omap3-beagle.dts: patch does not apply
Patch failed at 0004 ARM: dts: omap3-beagle: Make USB host pin naming
consistent

Could you rebase it?

Thanks,
Benoit


>
> Thanks,
> Benoit
>
> On 03/10/2013 12:34, Roger Quadros wrote:
>> Hi Benoit,
>>
>> Could you please take the device tree related patches [5 to 10] in
>> this series?
>> Thanks.
>>
>> cheers,
>> -roger
>>
>> On 09/24/2013 11:53 AM, Roger Quadros wrote:
>>> We no longer need to model the RESET line as a regulator since
>>> the USB phy-nop driver accepts "reset-gpios" property.
>>>
>>> Signed-off-by: Roger Quadros <rogerq@ti.com>
>>> ---
>>> arch/arm/boot/dts/omap3-beagle.dts | 13 +------------
>>> 1 files changed, 1 insertions(+), 12 deletions(-)
>>>
>>> diff --git a/arch/arm/boot/dts/omap3-beagle.dts
>>> b/arch/arm/boot/dts/omap3-beagle.dts
>>> index dfd8310..71bde47 100644
>>> --- a/arch/arm/boot/dts/omap3-beagle.dts
>>> +++ b/arch/arm/boot/dts/omap3-beagle.dts
>>> @@ -44,17 +44,6 @@
>>> };
>>> };
>>>
>>> - /* HS USB Port 2 RESET */
>>> - hsusb2_reset: hsusb2_reset_reg {
>>> - compatible = "regulator-fixed";
>>> - regulator-name = "hsusb2_reset";
>>> - regulator-min-microvolt = <3300000>;
>>> - regulator-max-microvolt = <3300000>;
>>> - gpio = <&gpio5 19 0>; /* gpio_147 */
>>> - startup-delay-us = <70000>;
>>> - enable-active-high;
>>> - };
>>> -
>>> /* HS USB Port 2 Power */
>>> hsusb2_power: hsusb2_power_reg {
>>> compatible = "regulator-fixed";
>>> @@ -68,7 +57,7 @@
>>> /* HS USB Host PHY on PORT 2 */
>>> hsusb2_phy: hsusb2_phy {
>>> compatible = "usb-nop-xceiv";
>>> - reset-supply = <&hsusb2_reset>;
>>> + reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>; /* gpio_147 */
>>> vcc-supply = <&hsusb2_power>;
>>> };
>>>
>>>
>>
>



\
 
 \ /
  Last update: 2013-10-03 16:01    [W:0.077 / U:1.124 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site