lkml.org 
[lkml]   [2013]   [Oct]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 05/10] ARM: dts: omap3-beagle: Use reset-gpios for hsusb2_reset
Hi Roger,

Yes, I will. I've been waiting for these ones for so long :-)

Thanks,
Benoit

On 03/10/2013 12:34, Roger Quadros wrote:
> Hi Benoit,
>
> Could you please take the device tree related patches [5 to 10] in this series?
> Thanks.
>
> cheers,
> -roger
>
> On 09/24/2013 11:53 AM, Roger Quadros wrote:
>> We no longer need to model the RESET line as a regulator since
>> the USB phy-nop driver accepts "reset-gpios" property.
>>
>> Signed-off-by: Roger Quadros <rogerq@ti.com>
>> ---
>> arch/arm/boot/dts/omap3-beagle.dts | 13 +------------
>> 1 files changed, 1 insertions(+), 12 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
>> index dfd8310..71bde47 100644
>> --- a/arch/arm/boot/dts/omap3-beagle.dts
>> +++ b/arch/arm/boot/dts/omap3-beagle.dts
>> @@ -44,17 +44,6 @@
>> };
>> };
>>
>> - /* HS USB Port 2 RESET */
>> - hsusb2_reset: hsusb2_reset_reg {
>> - compatible = "regulator-fixed";
>> - regulator-name = "hsusb2_reset";
>> - regulator-min-microvolt = <3300000>;
>> - regulator-max-microvolt = <3300000>;
>> - gpio = <&gpio5 19 0>; /* gpio_147 */
>> - startup-delay-us = <70000>;
>> - enable-active-high;
>> - };
>> -
>> /* HS USB Port 2 Power */
>> hsusb2_power: hsusb2_power_reg {
>> compatible = "regulator-fixed";
>> @@ -68,7 +57,7 @@
>> /* HS USB Host PHY on PORT 2 */
>> hsusb2_phy: hsusb2_phy {
>> compatible = "usb-nop-xceiv";
>> - reset-supply = <&hsusb2_reset>;
>> + reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>; /* gpio_147 */
>> vcc-supply = <&hsusb2_power>;
>> };
>>
>>
>



\
 
 \ /
  Last update: 2013-10-03 14:21    [W:0.964 / U:0.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site