lkml.org 
[lkml]   [2013]   [Sep]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v3 00/10] USB: phy: phy-nop: Manage RESET GPIO in the driver
Date
Hi,

Modelling the RESET line as a regulator supply wasn't a good idea
as it abuses the regulator framework and makes adaptation
code/data more complex.

Instead, manage the RESET gpio line directly in the driver.

This also makes us easy to migrate to a dedicated GPIO RESET controller
whenever it becomes available.

Apart from RESET line changes this series also adds USB host support
fro beagle-xm and fixes USB OTG port on beagle.

The full series is avilable at
git://github.com/rogerq/linux.git
in branch
phy-reset

*NOTE:* As there are changes to platform data, Patch 1 needs to be shared
between the arm-soc tree and usb tree.

Patch 1 is available at repo
git://github.com/rogerq/linux.git
in branch
phy-reset-common

Patch 2 contains the phy-nop driver changes
Patches 3 and 4 adapt legacy boot code to the phy-nop driver changes.
Patches 5, 6 and 7 adapt DT data to the binding changes.
Patch 8 is cleanup of omap3-beagle DT.
Patch 9 adds USB host support to omap3-beagle-xm using the new binding.
Patch 10 fixes USB OTG port on beagle.

Patches are based on v3.12-rc1

Tested leacy boot on omap3-beagle and omap3-beagle-xm
Tested DT boot on omap3-beagle, omap3-beagle-xm and omap4-panda-es

v3:
- Fix the Initial state of RESET line at probe time.
- Update hsusb3_reset line on omap5-uevm as well.
- Add patch 10 that fixes USB OTG port on beagle.

v2:
- Added RESET GPIO polarity feature
- Changed to gpio_set_value_cansleep()

cheers,
-roger

Roger Quadros (10):
usb: phy: generic: Add gpio_reset to platform data
usb: phy: generic: Don't use regulator framework for RESET line
ARM: OMAP2+: omap-usb-host: Get rid of platform_data from struct
usbhs_phy_data
ARM: OMAP2+: usb-host: Adapt to USB phy-nop RESET line changes
ARM: dts: omap3-beagle: Use reset-gpios for hsusb2_reset
ARM: dts: omap4-panda: Use reset-gpios for hsusb1_reset
ARM: dts: omap5-uevm: Use reset-gpios for hsusb2/3_reset
ARM: dts: omap3-beagle: Make USB host pin naming consistent
ARM: dts: omap3-beagle-xm: Add USB Host support
ARM: dts: omap3-beagle: Add USB OTG PHY details

.../devicetree/bindings/usb/usb-nop-xceiv.txt | 7 +-
arch/arm/boot/dts/omap3-beagle-xm.dts | 65 +++++++++++++--
arch/arm/boot/dts/omap3-beagle.dts | 44 +++++------
arch/arm/boot/dts/omap4-panda-common.dtsi | 18 +----
arch/arm/boot/dts/omap5-uevm.dts | 26 +------
arch/arm/mach-omap2/board-omap3beagle.c | 6 --
arch/arm/mach-omap2/usb-host.c | 18 ++--
arch/arm/mach-omap2/usb.h | 1 -
drivers/usb/phy/phy-am335x.c | 2 +-
drivers/usb/phy/phy-generic.c | 84 +++++++++++++-------
drivers/usb/phy/phy-generic.h | 6 +-
include/linux/usb/usb_phy_gen_xceiv.h | 3 +-
12 files changed, 153 insertions(+), 127 deletions(-)

--
1.7.4.1



\
 
 \ /
  Last update: 2013-09-24 11:21    [W:0.141 / U:0.408 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site