lkml.org 
[lkml]   [2010]   [Jun]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: Linux 2.6.35-rc2
From
[CC:Jeff+Tejun not removed, because you might want to look at the
attached dmesgs]

On Sun, Jun 6, 2010 at 4:19 PM, Linus Torvalds
<torvalds@linux-foundation.org> wrote:
> On Sun, 6 Jun 2010, Torsten Kaiser wrote:
>>
>> The first problem that shows up is, that after the KMS switches to the
>> correct video mode (1280x1024 for an DVI attached LCD), the display
>> begins to flicker. Every 1..2 seconds (guesstimated) the display turns
>> off and on again. Something in the new powersaving?
>
> Or maybe a borderline display timing that the display has trouble syncing
> up with?

With 2.6.34 and any previous KMS kernels the output was always stable.
(I think, I switch to the radeon KMS on 2.6.32)
The onscreen menu of the monitor showed 1280x1024@60.2Hz for
2.6.35-rc2, if I recall correctly.
Now back on 2.6.34 its 1280x1024@59.9Hz.

Comparing the DRM output from 2.6.34 and 2.6.35-rc2 I see the
following differences:
On 2.6.35-rc2 this block is missing:
[ 1.907716] [drm] GPU reset succeed (RBBM_STATUS=0x00000140)
[ 1.913403] [drm] 1 Power State(s)
[ 1.916810] [drm] State 0 Default (default)
[ 1.921017] [drm] 16 PCIE Lanes
[ 1.924255] [drm] 1 Clock Mode(s)
[ 1.927662] [drm] 0 engine/memory: 325000/200000
[ 1.932496] [drm] radeon: power management initialized
New on 2.6.35: [ 1.951340] [TTM] Initializing pool allocator.
Only on 2.6.34: [ 2.011963] [drm] radeon: cp idle (0x10000C03)
Only on 2.6.34: [ 2.020478] platform radeon_cp.0: firmware: using
built-in firmware radeon/R300_cp.bin

On 2.6.34 the output for connector 1 is:
[ 2.090935] [drm] Connector 1:
[ 2.094002] [drm] DVI-I
[ 2.096629] [drm] HPD1
[ 2.099174] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[ 2.105210] [drm] Encoders:
[ 2.108189] [drm] CRT2: INTERNAL_DAC2
[ 2.112222] [drm] DFP1: INTERNAL_TMDS1
With 2.6.35-rc2 the line 'HPD1' switches to 'NONE'

Everything else is identical. I have attached complete dmesg from both
kernels to this mail.

Torsten
[ 0.000000] Linux version 2.6.34 (root@treogen) (gcc version 4.4.3 (Gentoo 4.4.3-r2 p1.2) ) #1 SMP Mon May 17 05:55:19 CEST 2010
[ 0.000000] Command line: fastboot earlyprintk=serial,ttyS0,115200 console=ttyS0,115200 console=tty1 crypt_root=/dev/md3 radeon.modeset=1 video=1280x1024
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000dffd0000 (usable)
[ 0.000000] BIOS-e820: 00000000dffd0000 - 00000000dffde000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000dffde000 - 00000000e0000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
[ 0.000000] bootconsole [earlyser0] enabled
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x400000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xdffd0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] init_memory_mapping: 0000000000000000-00000000dffd0000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000120000000
[ 0.000000] RAMDISK: 37ec8000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000fb080 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000dffd0100 00064 (v01 A_M_I_ OEMXSDT 04000713 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000dffd0290 000F4 (v03 A_M_I_ OEMFACP 04000713 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000dffd0450 04FC5 (v01 S0027 S0027000 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000dffde000 00040
[ 0.000000] ACPI: APIC 00000000dffd0390 00080 (v01 A_M_I_ OEMAPIC 04000713 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000dffd0410 0003C (v01 A_M_I_ OEMMCFG 04000713 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000dffde040 00060 (v01 A_M_I_ AMI_OEM 04000713 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000dffd5420 00038 (v01 A_M_I_ OEMHPET0 04000713 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000dffd5460 0003C (v01 A_M_I_ OEMMCFG 04000713 MSFT 00000097)
[ 0.000000] ACPI: SRAT 00000000dffd54a0 00110 (v01 AMD HAMMER 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 00000000dffd55b0 004F0 (v01 A_M_I_ POWERNOW 00000001 AMD 00000001)
[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 0x02 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x03 -> Node 1
[ 0.000000] SRAT: Node 0 PXM 0 0-a0000
[ 0.000000] SRAT: Node 0 PXM 0 100000-80000000
[ 0.000000] SRAT: Node 1 PXM 1 80000000-e0000000
[ 0.000000] SRAT: Node 1 PXM 1 100000000-120000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000080000000
[ 0.000000] NODE_DATA [0000000001bb6240 - 0000000001bb823f]
[ 0.000000] Initmem setup node 1 0000000080000000-0000000120000000
[ 0.000000] NODE_DATA [0000000100000000 - 0000000100001fff]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000001 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00120000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000001 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x00080000
[ 0.000000] 1: 0x00080000 -> 0x000dffd0
[ 0.000000] 1: 0x00100000 -> 0x00120000
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x2008
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:1ec00000)
[ 0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:2
[ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff880001c00000 s76520 r8192 d21784 u1048576
[ 0.000000] pcpu-alloc: s76520 r8192 d21784 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 [1] 2 3
[ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 1032302
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: fastboot earlyprintk=serial,ttyS0,115200 console=ttyS0,115200 console=tty1 crypt_root=/dev/md3 radeon.modeset=1 video=1280x1024
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 20000000 size 32 MB
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000
[ 0.000000] Subtract (59 early reservations)
[ 0.000000] #1 [0001000000 - 0001bb5798] TEXT DATA BSS
[ 0.000000] #2 [0037ec8000 - 0037ff0000] RAMDISK
[ 0.000000] #3 [0001bb6000 - 0001bb6238] BRK
[ 0.000000] #4 [00000ff790 - 0000100000] BIOS reserved
[ 0.000000] #5 [00000ff780 - 00000ff790] MP-table mpf
[ 0.000000] #6 [000009fc00 - 00000f16f0] BIOS reserved
[ 0.000000] #7 [00000f188c - 00000ff780] BIOS reserved
[ 0.000000] #8 [00000f16f0 - 00000f188c] MP-table mpc
[ 0.000000] #9 [0000001000 - 0000003000] TRAMPOLINE
[ 0.000000] #10 [0000008000 - 000000c000] PGTABLE
[ 0.000000] #11 [000000c000 - 000000d000] PGTABLE
[ 0.000000] #12 [000000d000 - 000000f440] MEMNODEMAP
[ 0.000000] #13 [0001bb6240 - 0001bb8240] NODE_DATA
[ 0.000000] #14 [0100000000 - 0100002000] NODE_DATA
[ 0.000000] #15 [0001bb8240 - 0001bb9240] BOOTMEM
[ 0.000000] #16 [0001bb57c0 - 0001bb5940] BOOTMEM
[ 0.000000] #17 [0080000000 - 0080000180] BOOTMEM
[ 0.000000] #18 [00023ba000 - 00023bb000] BOOTMEM
[ 0.000000] #19 [00023bb000 - 00023bc000] BOOTMEM
[ 0.000000] #20 [0002400000 - 0004000000] MEMMAP 0
[ 0.000000] #21 [0100200000 - 0102000000] MEMMAP 1
[ 0.000000] #22 [0001bb5940 - 0001bb5ac0] BOOTMEM
[ 0.000000] #23 [0001bb9240 - 0001bc5240] BOOTMEM
[ 0.000000] #24 [0080000180 - 008000c180] BOOTMEM
[ 0.000000] #25 [008000c180 - 008000f180] BOOTMEM
[ 0.000000] #26 [0001bc6000 - 0001bc7000] BOOTMEM
[ 0.000000] #27 [0001bb5ac0 - 0001bb5b01] BOOTMEM
[ 0.000000] #28 [0001bb5b40 - 0001bb5b83] BOOTMEM
[ 0.000000] #29 [0001bb5bc0 - 0001bb5e28] BOOTMEM
[ 0.000000] #30 [0001bb5e40 - 0001bb5ea8] BOOTMEM
[ 0.000000] #31 [0001bb5ec0 - 0001bb5f28] BOOTMEM
[ 0.000000] #32 [0001bb5f40 - 0001bb5fa8] BOOTMEM
[ 0.000000] #33 [0001bc5240 - 0001bc52a8] BOOTMEM
[ 0.000000] #34 [0001bc52c0 - 0001bc5328] BOOTMEM
[ 0.000000] #35 [0001bc5340 - 0001bc53a8] BOOTMEM
[ 0.000000] #36 [0001bc53c0 - 0001bc5428] BOOTMEM
[ 0.000000] #37 [0001bc5440 - 0001bc54a8] BOOTMEM
[ 0.000000] #38 [0001bc54c0 - 0001bc5528] BOOTMEM
[ 0.000000] #39 [0001bc5540 - 0001bc55a8] BOOTMEM
[ 0.000000] #40 [0001bc55c0 - 0001bc5640] BOOTMEM
[ 0.000000] #41 [0001bc5640 - 0001bc56c0] BOOTMEM
[ 0.000000] #42 [0001c00000 - 0001c1a000] BOOTMEM
[ 0.000000] #43 [0001d00000 - 0001d1a000] BOOTMEM
[ 0.000000] #44 [0080200000 - 008021a000] BOOTMEM
[ 0.000000] #45 [0080300000 - 008031a000] BOOTMEM
[ 0.000000] #46 [0001bb5fc0 - 0001bb5fd0] BOOTMEM
[ 0.000000] #47 [0001bc56c0 - 0001bc56d0] BOOTMEM
[ 0.000000] #48 [0001bc5700 - 0001bc5710] BOOTMEM
[ 0.000000] #49 [0001bc5740 - 0001bc5760] BOOTMEM
[ 0.000000] #50 [0001bc5780 - 0001bc58c0] BOOTMEM
[ 0.000000] #51 [0001bc58c0 - 0001bc5920] BOOTMEM
[ 0.000000] #52 [0001bc5940 - 0001bc59a0] BOOTMEM
[ 0.000000] #53 [0001bc7000 - 0001bcf000] BOOTMEM
[ 0.000000] #54 [0020000000 - 0024000000] BOOTMEM
[ 0.000000] #55 [0004000000 - 0008000000] BOOTMEM
[ 0.000000] #56 [0001bcf000 - 0001bef000] BOOTMEM
[ 0.000000] #57 [0001c1a000 - 0001c5a000] BOOTMEM
[ 0.000000] #58 [000000f440 - 0000017440] BOOTMEM
[ 0.000000] Memory: 3989028k/4718592k available (5328k kernel code, 524872k absent, 204692k reserved, 5594k data, 540k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=2
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is enabled.
[ 0.000000] NR_IRQS:4352 nr_irqs:440
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty1] enabled, bootconsole disabled
[ 0.000000] Linux version 2.6.34 (root@treogen) (gcc version 4.4.3 (Gentoo 4.4.3-r2 p1.2) ) #1 SMP Mon May 17 05:55:19 CEST 2010
[ 0.000000] Command line: fastboot earlyprintk=serial,ttyS0,115200 console=ttyS0,115200 console=tty1 crypt_root=/dev/md3 radeon.modeset=1 video=1280x1024
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000dffd0000 (usable)
[ 0.000000] BIOS-e820: 00000000dffd0000 - 00000000dffde000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000dffde000 - 00000000e0000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
[ 0.000000] bootconsole [earlyser0] enabled
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x400000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xdffd0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] init_memory_mapping: 0000000000000000-00000000dffd0000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000120000000
[ 0.000000] RAMDISK: 37ec8000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000fb080 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000dffd0100 00064 (v01 A_M_I_ OEMXSDT 04000713 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000dffd0290 000F4 (v03 A_M_I_ OEMFACP 04000713 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000dffd0450 04FC5 (v01 S0027 S0027000 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000dffde000 00040
[ 0.000000] ACPI: APIC 00000000dffd0390 00080 (v01 A_M_I_ OEMAPIC 04000713 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000dffd0410 0003C (v01 A_M_I_ OEMMCFG 04000713 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000dffde040 00060 (v01 A_M_I_ AMI_OEM 04000713 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000dffd5420 00038 (v01 A_M_I_ OEMHPET0 04000713 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000dffd5460 0003C (v01 A_M_I_ OEMMCFG 04000713 MSFT 00000097)
[ 0.000000] ACPI: SRAT 00000000dffd54a0 00110 (v01 AMD HAMMER 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 00000000dffd55b0 004F0 (v01 A_M_I_ POWERNOW 00000001 AMD 00000001)
[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 0x02 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x03 -> Node 1
[ 0.000000] SRAT: Node 0 PXM 0 0-a0000
[ 0.000000] SRAT: Node 0 PXM 0 100000-80000000
[ 0.000000] SRAT: Node 1 PXM 1 80000000-e0000000
[ 0.000000] SRAT: Node 1 PXM 1 100000000-120000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000080000000
[ 0.000000] NODE_DATA [0000000001bb6240 - 0000000001bb823f]
[ 0.000000] Initmem setup node 1 0000000080000000-0000000120000000
[ 0.000000] NODE_DATA [0000000100000000 - 0000000100001fff]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000001 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00120000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000001 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x00080000
[ 0.000000] 1: 0x00080000 -> 0x000dffd0
[ 0.000000] 1: 0x00100000 -> 0x00120000
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x2008
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:1ec00000)
[ 0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:2
[ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff880001c00000 s76520 r8192 d21784 u1048576
[ 0.000000] pcpu-alloc: s76520 r8192 d21784 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 [1] 2 3
[ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 1032302
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: fastboot earlyprintk=serial,ttyS0,115200 console=ttyS0,115200 console=tty1 crypt_root=/dev/md3 radeon.modeset=1 video=1280x1024
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 20000000 size 32 MB
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000
[ 0.000000] Subtract (59 early reservations)
[ 0.000000] #1 [0001000000 - 0001bb5798] TEXT DATA BSS
[ 0.000000] #2 [0037ec8000 - 0037ff0000] RAMDISK
[ 0.000000] #3 [0001bb6000 - 0001bb6238] BRK
[ 0.000000] #4 [00000ff790 - 0000100000] BIOS reserved
[ 0.000000] #5 [00000ff780 - 00000ff790] MP-table mpf
[ 0.000000] #6 [000009fc00 - 00000f16f0] BIOS reserved
[ 0.000000] #7 [00000f188c - 00000ff780] BIOS reserved
[ 0.000000] #8 [00000f16f0 - 00000f188c] MP-table mpc
[ 0.000000] #9 [0000001000 - 0000003000] TRAMPOLINE
[ 0.000000] #10 [0000008000 - 000000c000] PGTABLE
[ 0.000000] #11 [000000c000 - 000000d000] PGTABLE
[ 0.000000] #12 [000000d000 - 000000f440] MEMNODEMAP
[ 0.000000] #13 [0001bb6240 - 0001bb8240] NODE_DATA
[ 0.000000] #14 [0100000000 - 0100002000] NODE_DATA
[ 0.000000] #15 [0001bb8240 - 0001bb9240] BOOTMEM
[ 0.000000] #16 [0001bb57c0 - 0001bb5940] BOOTMEM
[ 0.000000] #17 [0080000000 - 0080000180] BOOTMEM
[ 0.000000] #18 [00023ba000 - 00023bb000] BOOTMEM
[ 0.000000] #19 [00023bb000 - 00023bc000] BOOTMEM
[ 0.000000] #20 [0002400000 - 0004000000] MEMMAP 0
[ 0.000000] #21 [0100200000 - 0102000000] MEMMAP 1
[ 0.000000] #22 [0001bb5940 - 0001bb5ac0] BOOTMEM
[ 0.000000] #23 [0001bb9240 - 0001bc5240] BOOTMEM
[ 0.000000] #24 [0080000180 - 008000c180] BOOTMEM
[ 0.000000] #25 [008000c180 - 008000f180] BOOTMEM
[ 0.000000] #26 [0001bc6000 - 0001bc7000] BOOTMEM
[ 0.000000] #27 [0001bb5ac0 - 0001bb5b01] BOOTMEM
[ 0.000000] #28 [0001bb5b40 - 0001bb5b83] BOOTMEM
[ 0.000000] #29 [0001bb5bc0 - 0001bb5e28] BOOTMEM
[ 0.000000] #30 [0001bb5e40 - 0001bb5ea8] BOOTMEM
[ 0.000000] #31 [0001bb5ec0 - 0001bb5f28] BOOTMEM
[ 0.000000] #32 [0001bb5f40 - 0001bb5fa8] BOOTMEM
[ 0.000000] #33 [0001bc5240 - 0001bc52a8] BOOTMEM
[ 0.000000] #34 [0001bc52c0 - 0001bc5328] BOOTMEM
[ 0.000000] #35 [0001bc5340 - 0001bc53a8] BOOTMEM
[ 0.000000] #36 [0001bc53c0 - 0001bc5428] BOOTMEM
[ 0.000000] #37 [0001bc5440 - 0001bc54a8] BOOTMEM
[ 0.000000] #38 [0001bc54c0 - 0001bc5528] BOOTMEM
[ 0.000000] #39 [0001bc5540 - 0001bc55a8] BOOTMEM
[ 0.000000] #40 [0001bc55c0 - 0001bc5640] BOOTMEM
[ 0.000000] #41 [0001bc5640 - 0001bc56c0] BOOTMEM
[ 0.000000] #42 [0001c00000 - 0001c1a000] BOOTMEM
[ 0.000000] #43 [0001d00000 - 0001d1a000] BOOTMEM
[ 0.000000] #44 [0080200000 - 008021a000] BOOTMEM
[ 0.000000] #45 [0080300000 - 008031a000] BOOTMEM
[ 0.000000] #46 [0001bb5fc0 - 0001bb5fd0] BOOTMEM
[ 0.000000] #47 [0001bc56c0 - 0001bc56d0] BOOTMEM
[ 0.000000] #48 [0001bc5700 - 0001bc5710] BOOTMEM
[ 0.000000] #49 [0001bc5740 - 0001bc5760] BOOTMEM
[ 0.000000] #50 [0001bc5780 - 0001bc58c0] BOOTMEM
[ 0.000000] #51 [0001bc58c0 - 0001bc5920] BOOTMEM
[ 0.000000] #52 [0001bc5940 - 0001bc59a0] BOOTMEM
[ 0.000000] #53 [0001bc7000 - 0001bcf000] BOOTMEM
[ 0.000000] #54 [0020000000 - 0024000000] BOOTMEM
[ 0.000000] #55 [0004000000 - 0008000000] BOOTMEM
[ 0.000000] #56 [0001bcf000 - 0001bef000] BOOTMEM
[ 0.000000] #57 [0001c1a000 - 0001c5a000] BOOTMEM
[ 0.000000] #58 [000000f440 - 0000017440] BOOTMEM
[ 0.000000] Memory: 3989028k/4718592k available (5328k kernel code, 524872k absent, 204692k reserved, 5594k data, 540k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=2
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is enabled.
[ 0.000000] NR_IRQS:4352 nr_irqs:440
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty1] enabled, bootconsole disabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2599.983 MHz processor.
[ 0.020004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5199.96 BogoMIPS (lpj=25999830)
[ 0.030018] Security Framework initialized
[ 0.034374] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.042406] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.051165] Mount-cache hash table entries: 256
[ 0.056407] CPU: Physical Processor ID: 0
[ 0.060003] CPU: Processor Core ID: 0
[ 0.063668] mce: CPU supports 5 MCE banks
[ 0.070007] using C1E aware idle routine
[ 0.073929] Performance Events: AMD PMU driver.
[ 0.078488] ... version: 0
[ 0.080001] ... bit width: 48
[ 0.084103] ... generic registers: 4
[ 0.090001] ... value mask: 0000ffffffffffff
[ 0.095314] ... max period: 00007fffffffffff
[ 0.100001] ... fixed-purpose events: 0
[ 0.104008] ... event mask: 000000000000000f
[ 0.110023] Freeing SMP alternatives: 36k freed
[ 0.114570] ACPI: Core revision 20100121
[ 0.128144] Setting APIC routing to flat
[ 0.130427] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.238694] CPU0: Dual-Core AMD Opteron(tm) Processor 2218 stepping 02
[ 0.250000] Booting Node 0, Processors #1 Ok.
[ 0.400635] Booting Node 1, Processors #2 #3 Ok.
[ 0.720033] Brought up 4 CPUs
[ 0.723008] Total of 4 processors activated (20800.07 BogoMIPS).
[ 0.730052] NET: Registered protocol family 16
[ 0.734508] TOM: 00000000e0000000 aka 3584M
[ 0.734508] TOM2: 0000000120000000 aka 4608M
[ 0.740016] ACPI: bus type pci registered
[ 0.744036] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xf0000000-0xffffffff] (base 0xf0000000)
[ 0.750002] PCI: not using MMCONFIG
[ 0.760001] PCI: Using configuration type 1 for base access
[ 0.770046] bio: create slab <bio-0> at 0
[ 0.781543] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.794838] ACPI: Interpreter enabled
[ 0.798506] ACPI: (supports S0 S5)
[ 0.800597] ACPI: Using IOAPIC for interrupt routing
[ 0.805605] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xf0000000-0xffffffff] (base 0xf0000000)
[ 0.824342] [Firmware Bug]: PCI: MMCONFIG at [mem 0xf0000000-0xffffffff] not reserved in ACPI motherboard resources
[ 0.830001] PCI: not using MMCONFIG
[ 0.840670] ACPI Warning: Incorrect checksum in table [OEMB] - EC, should be E7 (20100121/tbutils-314)
[ 0.857020] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.860251] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.871032] pci 0000:00:06.0: PCI bridge to [bus 05-05] (subtractive decode)
[ 0.880141] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.890007] pci 0000:00:0b.0: PCI bridge to [bus 04-04]
[ 0.910008] pci 0000:00:0c.0: PCI bridge to [bus 03-03]
[ 0.930007] pci 0000:00:0d.0: PCI bridge to [bus 02-02]
[ 0.935343] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.940005] pci 0000:00:0f.0: PCI bridge to [bus 01-01]
[ 0.960269] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *11
[ 0.966734] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
[ 0.972955] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *10
[ 0.981452] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[ 0.989112] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *10
[ 0.992060] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10
[ 1.002047] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
[ 1.010090] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *5
[ 1.016582] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10
[ 1.022039] ACPI: PCI Interrupt Link [LMAD] (IRQs 20 21 22 23) *0, disabled.
[ 1.030377] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11
[ 1.036951] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled.
[ 1.042948] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11
[ 1.051458] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
[ 1.058046] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *5
[ 1.061962] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
[ 1.071087] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *10
[ 1.077707] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[ 1.082948] ACPI: PCI Interrupt Link [LSA2] (IRQs 20 21 22 23) *10
[ 1.091626] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.098099] vgaarb: loaded
[ 1.100062] SCSI subsystem initialized
[ 1.103775] usbcore: registered new interface driver usbfs
[ 1.110011] usbcore: registered new interface driver hub
[ 1.115509] usbcore: registered new device driver usb
[ 1.120016] Advanced Linux Sound Architecture Driver Version 1.0.22.1.
[ 1.126531] PCI: Using ACPI for IRQ routing
[ 1.130081] NetLabel: Initializing
[ 1.133427] NetLabel: domain hash size = 128
[ 1.140001] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.144973] NetLabel: unlabeled traffic allowed by default
[ 1.150004] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 1.157051] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 1.161089] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 1.200028] Switching to clocksource hpet
[ 1.204054] Slow work thread pool: Starting up
[ 1.204645] Slow work thread pool: Ready
[ 1.208627] FS-Cache: Loaded
[ 1.211602] CacheFiles: Loaded
[ 1.214686] pnp: PnP ACPI init
[ 1.217758] ACPI: bus type pnp registered
[ 1.226787] pnp: PnP ACPI: found 14 devices
[ 1.230979] ACPI: ACPI bus type pnp unregistered
[ 1.235639] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 1.241699] system 00:06: [io 0x07b0-0x07df] has been reserved
[ 1.247652] system 00:06: [io 0x0800-0x080f] has been reserved
[ 1.253588] system 00:06: [io 0x0bb0-0x0bdf] has been reserved
[ 1.259509] system 00:06: [io 0x2000-0x207f] has been reserved
[ 1.265462] system 00:06: [io 0x2080-0x20ff] has been reserved
[ 1.271382] system 00:06: [io 0x2400-0x247f] has been reserved
[ 1.277337] system 00:06: [io 0x2480-0x24ff] has been reserved
[ 1.283273] system 00:06: [io 0x2800-0x287f] has been reserved
[ 1.289191] system 00:06: [io 0x2880-0x28ff] has been reserved
[ 1.295137] system 00:06: [io 0x2c00-0x2c7f] has been reserved
[ 1.301058] system 00:06: [io 0x2c80-0x2cff] has been reserved
[ 1.307195] system 00:06: [mem 0x000d0000-0x000d3fff window] has been reserved
[ 1.314438] system 00:06: [mem 0x000d4000-0x000d7fff window] has been reserved
[ 1.321655] system 00:06: [mem 0x000de000-0x000dffff window] has been reserved
[ 1.328912] system 00:06: [mem 0xfee01000-0xfeefffff] has been reserved
[ 1.335540] system 00:06: [mem 0xefa80000-0xefabffff] has been reserved
[ 1.342153] system 00:06: [mem 0xffb00000-0xffbfffff] has been reserved
[ 1.348803] system 00:06: [mem 0xfff00000-0xffffffff] has been reserved
[ 1.355434] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 1.362396] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
[ 1.369207] system 00:0c: [io 0x0290-0x0297] has been reserved
[ 1.375149] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[ 1.382104] system 00:0d: [mem 0x000c0000-0x000cffff] has been reserved
[ 1.388754] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
[ 1.395731] system 00:0d: [mem 0x00100000-0xdfffffff] could not be reserved
[ 1.402709] system 00:0d: [mem 0xfec00000-0xffffffff] could not be reserved
[ 1.415187] pci 0000:00:06.0: PCI bridge to [bus 05-05]
[ 1.420417] pci 0000:00:06.0: bridge window [io disabled]
[ 1.426109] pci 0000:00:06.0: bridge window [mem 0xeff00000-0xefffffff]
[ 1.433026] pci 0000:00:06.0: bridge window [mem 0xeef00000-0xeeffffff pref]
[ 1.440249] pci 0000:00:0b.0: PCI bridge to [bus 04-04]
[ 1.445513] pci 0000:00:0b.0: bridge window [io 0xe000-0xefff]
[ 1.451605] pci 0000:00:0b.0: bridge window [mem 0xefe00000-0xefefffff]
[ 1.458426] pci 0000:00:0b.0: bridge window [mem pref disabled]
[ 1.464536] pci 0000:00:0c.0: PCI bridge to [bus 03-03]
[ 1.469762] pci 0000:00:0c.0: bridge window [io disabled]
[ 1.475449] pci 0000:00:0c.0: bridge window [mem 0xefd00000-0xefdfffff]
[ 1.482231] pci 0000:00:0c.0: bridge window [mem pref disabled]
[ 1.488362] pci 0000:00:0d.0: PCI bridge to [bus 02-02]
[ 1.493733] pci 0000:00:0d.0: bridge window [io disabled]
[ 1.499393] pci 0000:00:0d.0: bridge window [mem 0xefc00000-0xefcfffff]
[ 1.506213] pci 0000:00:0d.0: bridge window [mem pref disabled]
[ 1.512308] pci 0000:00:0f.0: PCI bridge to [bus 01-01]
[ 1.517566] pci 0000:00:0f.0: bridge window [io 0xd000-0xdfff]
[ 1.523682] pci 0000:00:0f.0: bridge window [mem 0xefb00000-0xefbfffff]
[ 1.530471] pci 0000:00:0f.0: bridge window [mem 0xe0000000-0xe7ffffff 64bit pref]
[ 1.538332] NET: Registered protocol family 2
[ 1.542861] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.551657] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.564099] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.571349] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.578005] TCP reno registered
[ 1.581177] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.587261] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.593860] NET: Registered protocol family 1
[ 1.598392] RPC: Registered udp transport module.
[ 1.603120] RPC: Registered tcp transport module.
[ 1.607833] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.635988] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.641518] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.647073] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.652620] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.658151] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.663717] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.669261] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.674835] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.680377] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.685985] Unpacking initramfs...
[ 1.712046] Freeing initrd memory: 1184k freed
[ 1.717280] PCI-DMA: Disabling AGP.
[ 1.721037] PCI-DMA: aperture base @ 20000000 size 65536 KB
[ 1.726627] PCI-DMA: using GART IOMMU.
[ 1.730388] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 1.743161] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.752880] VFS: Disk quotas dquot_6.5.2
[ 1.757517] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.764145] FS-Cache: Netfs 'nfs' registered for caching
[ 1.769738] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
[ 1.779477] SGI XFS Quota Management subsystem
[ 1.783943] msgmni has been set to 7922
[ 1.788729] alg: No test for stdrng (krng)
[ 1.796919] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[ 1.802978] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[ 1.810377] io scheduler noop registered
[ 1.814473] io scheduler cfq registered (default)
[ 1.820227] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.828604] ACPI: Power Button [PWRB]
[ 1.832370] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.839787] ACPI: Power Button [PWRF]
[ 1.847686] Real Time Clock Driver v1.12b
[ 1.851969] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
[ 1.860950] Hangcheck: Using get_cycles().
[ 1.865127] [drm] Initialized drm 1.1.0 20060810
[ 1.869805] [drm] radeon kernel modesetting enabled.
[ 1.875123] ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 19
[ 1.880895] radeon 0000:01:00.0: PCI INT A -> Link[LNEB] -> GSI 19 (level, low) -> IRQ 19
[ 1.891334] [drm] initializing kernel modesetting (RV380 0x1002:0x5B60).
[ 1.898194] [drm] register mmio base: 0xEFBF0000
[ 1.902831] [drm] register mmio size: 65536
[ 1.907716] [drm] GPU reset succeed (RBBM_STATUS=0x00000140)
[ 1.913403] [drm] 1 Power State(s)
[ 1.916810] [drm] State 0 Default (default)
[ 1.921017] [drm] 16 PCIE Lanes
[ 1.924255] [drm] 1 Clock Mode(s)
[ 1.927662] [drm] 0 engine/memory: 325000/200000
[ 1.932496] [drm] radeon: power management initialized
[ 1.937644] [drm] Generation 2 PCI interface, using max accessible memory
[ 1.944456] radeon 0000:01:00.0: VRAM: 128M 0xE0000000 - 0xE7FFFFFF (128M used)
[ 1.951775] radeon 0000:01:00.0: GTT: 512M 0xC0000000 - 0xDFFFFFFF
[ 1.957992] [drm] radeon: using MSI.
[ 1.961614] [drm] radeon: irq initialized.
[ 1.966591] [drm] Detected VRAM RAM=128M, BAR=128M
[ 1.971425] [drm] RAM width 64bits DDR
[ 1.975265] [TTM] Zone kernel: Available graphics memory: 2028098 kiB.
[ 1.981907] [drm] radeon: 128M of VRAM memory ready
[ 1.986783] [drm] radeon: 512M of GTT memory ready.
[ 1.991700] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 1.999124] [drm] radeon: 1 quad pipes, 1 Z pipes initialized.
[ 2.005749] [drm] PCIE GART of 512M enabled (table at 0xE0040000).
[ 2.011963] [drm] radeon: cp idle (0x10000C03)
[ 2.016533] [drm] Loading R300 Microcode
[ 2.020478] platform radeon_cp.0: firmware: using built-in firmware radeon/R300_cp.bin
[ 2.028553] [drm] radeon: ring at 0x00000000C0000000
[ 2.033555] [drm] ring test succeeded in 1 usecs
[ 2.038266] [drm] radeon: ib pool ready.
[ 2.042272] [drm] ib test succeeded in 0 usecs
[ 2.046925] [drm] Default TV standard: NTSC
[ 2.051131] [drm] 27.000000000 MHz TV ref clk
[ 2.055496] [drm] DFP table revision: 4
[ 2.059502] [drm] Default TV standard: NTSC
[ 2.063706] [drm] 27.000000000 MHz TV ref clk
[ 2.068170] [drm] Radeon Display Connectors
[ 2.072373] [drm] Connector 0:
[ 2.075436] [drm] VGA
[ 2.077894] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 2.083925] [drm] Encoders:
[ 2.086904] [drm] CRT1: INTERNAL_DAC1
[ 2.090935] [drm] Connector 1:
[ 2.094002] [drm] DVI-I
[ 2.096629] [drm] HPD1
[ 2.099174] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[ 2.105210] [drm] Encoders:
[ 2.108189] [drm] CRT2: INTERNAL_DAC2
[ 2.112222] [drm] DFP1: INTERNAL_TMDS1
[ 2.116325] [drm] Connector 2:
[ 2.119386] [drm] S-video
[ 2.122217] [drm] Encoders:
[ 2.125193] [drm] TV1: INTERNAL_DAC2
[ 2.256925] [drm] fb mappable at 0xE00C0000
[ 2.261142] [drm] vram apper at 0xE0000000
[ 2.265244] [drm] size 5242880
[ 2.268306] [drm] fb depth is 24
[ 2.271567] [drm] pitch is 5120
[ 2.275077] fbcon: radeondrmfb (fb0) is primary device
[ 2.394893] Console: switching to colour frame buffer device 160x64
[ 2.407457] fb0: radeondrmfb frame buffer device
[ 2.412122] registered panic notifier
[ 2.415804] [drm] Initialized radeon 2.3.0 20080528 for 0000:01:00.0 on minor 0
[ 2.423293] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[ 2.429841] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.436209] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.442279] sata_sil24 0000:04:00.0: PCI INT A -> Link[LNEB] -> GSI 19 (level, low) -> IRQ 19
[ 2.451151] scsi0 : sata_sil24
[ 2.454391] scsi1 : sata_sil24
[ 2.457579] ata1: SATA max UDMA/100 host m128@0xefeffc00 port 0xefef8000 irq 19
[ 2.464942] ata2: SATA max UDMA/100 host m128@0xefeffc00 port 0xefefa000 irq 19
[ 2.472729] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[ 2.478511] sata_nv 0000:00:05.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
[ 2.486857] sata_nv 0000:00:05.0: Using SWNCQ mode
[ 2.491830] scsi2 : sata_nv
[ 2.494774] scsi3 : sata_nv
[ 2.497793] ata3: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 23
[ 2.504989] ata4: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 23
[ 2.512514] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 22
[ 2.518298] sata_nv 0000:00:05.1: PCI INT B -> Link[LSA1] -> GSI 22 (level, low) -> IRQ 22
[ 2.526639] sata_nv 0000:00:05.1: Using SWNCQ mode
[ 2.531620] scsi4 : sata_nv
[ 2.534558] scsi5 : sata_nv
[ 2.537566] ata5: SATA max UDMA/133 cmd 0xc080 ctl 0xc000 bmdma 0xb800 irq 22
[ 2.544761] ata6: SATA max UDMA/133 cmd 0xbc00 ctl 0xb880 bmdma 0xb808 irq 22
[ 2.552272] ACPI: PCI Interrupt Link [LSA2] enabled at IRQ 21
[ 2.558058] sata_nv 0000:00:05.2: PCI INT C -> Link[LSA2] -> GSI 21 (level, low) -> IRQ 21
[ 2.566400] sata_nv 0000:00:05.2: Using SWNCQ mode
[ 2.571376] scsi6 : sata_nv
[ 2.574321] scsi7 : sata_nv
[ 2.577328] ata7: SATA max UDMA/133 cmd 0xb480 ctl 0xb400 bmdma 0xac00 irq 21
[ 2.584524] ata8: SATA max UDMA/133 cmd 0xb080 ctl 0xb000 bmdma 0xac08 irq 21
[ 2.591949] scsi8 : pata_amd
[ 2.594980] scsi9 : pata_amd
[ 2.598876] ata9: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 2.605886] ata10: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 2.613157] tg3.c:v3.108 (February 17, 2010)
[ 2.617704] ACPI: PCI Interrupt Link [LNEA] enabled at IRQ 18
[ 2.623516] tg3 0000:03:00.0: PCI INT A -> Link[LNEA] -> GSI 18 (level, low) -> IRQ 18
[ 2.685375] tg3 0000:03:00.0: eth0: Tigon3 [partno(BCM95700A6) rev b002] (PCI Express) MAC address 00:17:31:f9:cc:c5
[ 2.697552] tg3 0000:03:00.0: eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1])
[ 2.708132] tg3 0000:03:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 2.717641] tg3 0000:03:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 2.726381] ACPI: PCI Interrupt Link [LNED] enabled at IRQ 17
[ 2.734055] tg3 0000:02:00.0: PCI INT A -> Link[LNED] -> GSI 17 (level, low) -> IRQ 17
[ 2.784279] tg3 0000:02:00.0: eth1: Tigon3 [partno(BCM95700A6) rev b002] (PCI Express) MAC address 00:18:f3:44:df:ea
[ 2.796771] tg3 0000:02:00.0: eth1: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1])
[ 2.807635] tg3 0000:02:00.0: eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 2.817342] tg3 0000:02:00.0: eth1: dma_rwctrl[76180000] dma_mask[64-bit]
[ 2.826333] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 16
[ 2.834268] ohci1394 0000:05:08.0: PCI INT A -> Link[LNKA] -> GSI 16 (level, low) -> IRQ 16
[ 2.890341] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.910040] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[effff800-efffffff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 2.934154] ata7: SATA link down (SStatus 0 SControl 300)
[ 2.942395] eth1394: eth2: IPv4 over IEEE 1394 (fw-host0)
[ 2.950173] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.959381] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 20
[ 2.967544] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 20 (level, low) -> IRQ 20
[ 2.978249] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 2.985993] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 2.996053] ehci_hcd 0000:00:02.1: debug port 1
[ 3.000054] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.011252] ehci_hcd 0000:00:02.1: irq 20, io mem 0xefaebc00
[ 3.040011] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 3.048130] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.057074] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.066226] ata3.00: ATA-7: MAXTOR STM3320820AS, 3.AAE, max UDMA/133
[ 3.066229] ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 3.084512] usb usb1: Product: EHCI Host Controller
[ 3.092075] usb usb1: Manufacturer: Linux 2.6.34 ehci_hcd
[ 3.099706] usb usb1: SerialNumber: 0000:00:02.1
[ 3.106716] hub 1-0:1.0: USB hub found
[ 3.112775] hub 1-0:1.0: 10 ports detected
[ 3.119385] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.128372] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[ 3.136547] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 23 (level, low) -> IRQ 23
[ 3.147387] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 3.149532] ata3.00: configured for UDMA/133
[ 3.161415] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 3.171464] ohci_hcd 0000:00:02.0: irq 23, io mem 0xefaf8000
[ 3.242018] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.251100] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.260589] usb usb2: Product: OHCI Host Controller
[ 3.268177] usb usb2: Manufacturer: Linux 2.6.34 ohci_hcd
[ 3.276173] usb usb2: SerialNumber: 0000:00:02.0
[ 3.283357] hub 2-0:1.0: USB hub found
[ 3.289400] hub 2-0:1.0: 10 ports detected
[ 3.295854] Initializing USB Mass Storage driver...
[ 3.303183] usbcore: registered new interface driver usb-storage
[ 3.311507] USB Mass Storage support registered.
[ 3.318876] usbcore: registered new interface driver libusual
[ 3.327353] usbcore: registered new interface driver ums-alauda
[ 3.335697] usbcore: registered new interface driver ums-cypress
[ 3.344140] usbcore: registered new interface driver ums-datafab
[ 3.352625] usbcore: registered new interface driver ums-freecom
[ 3.360983] usbcore: registered new interface driver ums-isd200
[ 3.369397] usbcore: registered new interface driver ums-jumpshot
[ 3.378106] usbcore: registered new interface driver ums-karma
[ 3.386102] usbcore: registered new interface driver ums-sddr09
[ 3.394181] usbcore: registered new interface driver ums-sddr55
[ 3.402373] usbcore: registered new interface driver ums-usbat
[ 3.410328] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 3.422340] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.429474] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.436580] mice: PS/2 mouse device common for all mice
[ 3.444095] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 3.452773] I2O subsystem v1.325
[ 3.458070] i2o: max drivers = 8
[ 3.463846] i2c /dev entries driver
[ 3.464640] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 3.480250] i2c i2c-2: nForce2 SMBus adapter at 0x2a00
[ 3.487244] i2c i2c-3: nForce2 SMBus adapter at 0x2a80
[ 3.494230] Linux video capture interface: v2.00
[ 3.501157] bttv: driver version 0.9.18 loaded
[ 3.507419] bttv: using 8 buffers with 2080k (520 pages) each for capture
[ 3.516454] bttv: Bt8xx card found (0).
[ 3.522442] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 19
[ 3.530083] bttv 0000:05:06.0: PCI INT A -> Link[LNKC] -> GSI 19 (level, low) -> IRQ 19
[ 3.539791] bttv0: Bt878 (rev 17) at 0000:05:06.0, irq: 19, latency: 64, mmio: 0xeefff000
[ 3.550073] bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb
[ 3.559573] bttv0: using: Hauppauge (bt878) [card=10,autodetected]
[ 3.567769] IRQ 19/bttv0: IRQF_DISABLED is not guaranteed on shared IRQs
[ 3.579053] bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
[ 3.616030] tveeprom 4-0050: Hauppauge model 61344, rev D421, serial# 3902813
[ 3.624963] tveeprom 4-0050: tuner model is Philips FM1216 (idx 21, type 5)
[ 3.633741] tveeprom 4-0050: TV standards PAL(B/G) (eeprom 0x04)
[ 3.633768] usb 2-6: new low speed USB device using ohci_hcd and address 2
[ 3.650278] tveeprom 4-0050: audio processor is MSP3415 (idx 6)
[ 3.657936] tveeprom 4-0050: has radio
[ 3.663746] bttv0: Hauppauge eeprom indicates model#61344
[ 3.670895] bttv0: tuner type=5
[ 3.686104] msp3400 4-0040: MSP3415D-B3 found @ 0x80 (bt878 #0 [sw])
[ 3.694347] msp3400 4-0040: msp3400 supports nicam, mode is autodetect
[ 3.714923] tuner 4-0061: chip found @ 0xc2 (bt878 #0 [sw])
[ 3.722812] tuner-simple 4-0061: creating new instance
[ 3.729714] tuner-simple 4-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
[ 3.740398] bttv0: registered device video0
[ 3.746712] bttv0: registered device vbi0
[ 3.752700] bttv0: registered device radio0
[ 3.767505] bttv0: PLL: 28636363 => 35468950 .. ok
[ 3.811034] usb 2-6: New USB device found, idVendor=062a, idProduct=0000
[ 3.811037] usb 2-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.832682] input: i2c IR (Hauppauge) as /devices/virtual/input/input4
[ 3.841136] Creating IR device irrcv0
[ 3.846753] ir-kbd-i2c: i2c IR (Hauppauge) detected at i2c-4/4-0018/ir0 [bt878 #0 [sw]]
[ 4.693782] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
[ 4.703824] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 4.708127] ata1.00: ATA-7: SAMSUNG HD642JJ, 1AA01113, max UDMA7
[ 4.708129] ata1.00: 1250263728 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 4.714574] ata1.00: configured for UDMA/100
[ 4.714684] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD642JJ 1AA0 PQ: 0 ANSI: 5
[ 4.714966] sd 0:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[ 4.715033] sd 0:0:0:0: [sda] Write Protect is off
[ 4.715053] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.715170] sda: sda1 sda2 sda3
[ 4.780219] k8temp 0000:00:19.3: Temperature readouts might be wrong - check erratum #141
[ 4.790559] md: raid1 personality registered for level 1
[ 4.790710] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.805007] device-mapper: uevent: version 1.0.3
[ 4.812227] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[ 4.823060] EDAC MC: Ver: 2.1.0 May 17 2010
[ 4.829759] EDAC amd64_edac: Ver: 3.3.0 May 17 2010
[ 4.836899] EDAC amd64: ECC is enabled by BIOS.
[ 4.843676] EDAC amd64: ECC is enabled by BIOS.
[ 4.850849] EDAC MC0: Giving out device to 'amd64_edac' 'RevF': DEV 0000:00:18.2
[ 4.860624] EDAC MC1: Giving out device to 'amd64_edac' 'RevF': DEV 0000:00:19.2
[ 4.870465] EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED)
[ 4.884208] cpuidle: using governor ladder
[ 4.890577] cpuidle: using governor menu
[ 4.898350] usbcore: registered new interface driver hiddev
[ 4.912323] input: HID 062a:0000 as /devices/pci0000:00/0000:00:02.0/usb2/2-6/2-6:1.0/input/input5
[ 4.923730] generic-usb 0003:062A:0000.0001: input,hidraw0: USB HID v1.10 Mouse [HID 062a:0000] on usb-0000:00:02.0-6/input0
[ 4.937411] usbcore: registered new interface driver usbhid
[ 4.945348] usbhid: USB HID core driver
[ 4.951946] Bt87x 0000:05:06.1: PCI INT A -> Link[LNKC] -> GSI 19 (level, low) -> IRQ 19
[ 4.962679] bt87x0: Using board 1, analog, digital (rate 32000 Hz)
[ 4.971774] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
[ 4.979931] HDA Intel 0000:00:06.1: PCI INT B -> Link[LAZA] -> GSI 22 (level, low) -> IRQ 22
[ 4.990667] hda_intel: Disable MSI for Nvidia chipset
[ 6.360389] ALSA device list:
[ 6.365824] #0: HDA NVidia at 0xefafc000 irq 22
[ 6.373216] #1: Brooktree Bt878 at 0xeeffe000, irq 19
[ 6.381026] Initializing XFRM netlink socket
[ 6.387658] NET: Registered protocol family 17
[ 6.394295] NET: Registered protocol family 15
[ 6.401415] powernow-k8: Found 2 Dual-Core AMD Opteron(tm) Processor 2218 processors (4 cpu cores) (version 2.20.00)
[ 6.414525] powernow-k8: 0 : fid 0x12 (2600 MHz), vid 0x8
[ 6.422820] powernow-k8: 1 : fid 0x10 (2400 MHz), vid 0xa
[ 6.430710] powernow-k8: 2 : fid 0xe (2200 MHz), vid 0xc
[ 6.438477] powernow-k8: 3 : fid 0xc (2000 MHz), vid 0xe
[ 6.446236] powernow-k8: 4 : fid 0xa (1800 MHz), vid 0x10
[ 6.454234] powernow-k8: 5 : fid 0x2 (1000 MHz), vid 0x12
[ 6.462318] powernow-k8: 0 : fid 0x12 (2600 MHz), vid 0x8
[ 6.470083] powernow-k8: 1 : fid 0x10 (2400 MHz), vid 0xa
[ 6.478053] powernow-k8: 2 : fid 0xe (2200 MHz), vid 0xc
[ 6.485919] powernow-k8: 3 : fid 0xc (2000 MHz), vid 0xe
[ 6.493734] powernow-k8: 4 : fid 0xa (1800 MHz), vid 0x10
[ 6.501809] powernow-k8: 5 : fid 0x2 (1000 MHz), vid 0x12
[ 6.940041] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
[ 6.956874] ata2.00: ATA-7: SAMSUNG HD642JJ, 1AA01113, max UDMA7
[ 6.967362] ata2.00: 1250263728 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 6.985078] ata2.00: configured for UDMA/100
[ 6.993919] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD642JJ 1AA0 PQ: 0 ANSI: 5
[ 7.006997] sd 1:0:0:0: [sdb] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[ 7.007307] scsi 2:0:0:0: Direct-Access ATA MAXTOR STM332082 3.AA PQ: 0 ANSI: 5
[ 7.007760] sd 2:0:0:0: [sdc] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 7.007864] sd 2:0:0:0: [sdc] Write Protect is off
[ 7.007950] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.008208] sdc: sdc1 sdc2
[ 7.073381] Clocksource tsc unstable (delta = -334379398 ns)
[ 7.074463] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 7.092611] sd 1:0:0:0: [sdb] Write Protect is off
[ 7.101789] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.115467] sdb: sdb1 sdb2 sdb3
[ 7.138591] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 7.350458] ata4: SATA link down (SStatus 0 SControl 300)
[ 7.700468] ata6: SATA link down (SStatus 0 SControl 300)
[ 8.061543] ata8: SATA link down (SStatus 0 SControl 300)
[ 8.069085] Freeing unused kernel memory: 540k freed
[ 8.079109] Write protecting the kernel read-only data: 10240k
[ 8.089447] Freeing unused kernel memory: 796k freed
[ 8.099694] Freeing unused kernel memory: 1760k freed
[ 0.000000] Linux version 2.6.35-rc2 (root@treogen) (gcc version 4.4.3 (Gentoo 4.4.3-r2 p1.2) ) #1 SMP Sun Jun 6 11:39:15 CEST 2010
[ 0.000000] Command line: fastboot earlyprintk=serial,ttyS0,115200 console=ttyS0,115200 console=tty1 crypt_root=/dev/md3 radeon.modeset=1 video=1280x1024
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000dffd0000 (usable)
[ 0.000000] BIOS-e820: 00000000dffd0000 - 00000000dffde000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000dffde000 - 00000000e0000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
[ 0.000000] bootconsole [earlyser0] enabled
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x400000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xdffd0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] init_memory_mapping: 0000000000000000-00000000dffd0000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000120000000
[ 0.000000] RAMDISK: 37ec8000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000fb080 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000dffd0100 00064 (v01 A_M_I_ OEMXSDT 04000713 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000dffd0290 000F4 (v03 A_M_I_ OEMFACP 04000713 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000dffd0450 04FC5 (v01 S0027 S0027000 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000dffde000 00040
[ 0.000000] ACPI: APIC 00000000dffd0390 00080 (v01 A_M_I_ OEMAPIC 04000713 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000dffd0410 0003C (v01 A_M_I_ OEMMCFG 04000713 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000dffde040 00060 (v01 A_M_I_ AMI_OEM 04000713 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000dffd5420 00038 (v01 A_M_I_ OEMHPET0 04000713 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000dffd5460 0003C (v01 A_M_I_ OEMMCFG 04000713 MSFT 00000097)
[ 0.000000] ACPI: SRAT 00000000dffd54a0 00110 (v01 AMD HAMMER 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 00000000dffd55b0 004F0 (v01 A_M_I_ POWERNOW 00000001 AMD 00000001)
[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 0x02 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x03 -> Node 1
[ 0.000000] SRAT: Node 0 PXM 0 0-a0000
[ 0.000000] SRAT: Node 0 PXM 0 100000-80000000
[ 0.000000] SRAT: Node 1 PXM 1 80000000-e0000000
[ 0.000000] SRAT: Node 1 PXM 1 100000000-120000000
[ 0.000000] SRAT: Node 0 [0,a0000) + [100000,80000000) -> [0,80000000)
[ 0.000000] SRAT: Node 1 [80000000,e0000000) + [100000000,120000000) -> [80000000,120000000)
[ 0.000000] Initmem setup node 0 0000000000000000-0000000080000000
[ 0.000000] NODE_DATA [0000000001bba240 - 0000000001bbc23f]
[ 0.000000] Initmem setup node 1 0000000080000000-0000000120000000
[ 0.000000] NODE_DATA [0000000100000000 - 0000000100001fff]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000001 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00120000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000001 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x00080000
[ 0.000000] 1: 0x00080000 -> 0x000dffd0
[ 0.000000] 1: 0x00100000 -> 0x00120000
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x2008
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:1ec00000)
[ 0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:2
[ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff880001c00000 s77440 r8192 d20864 u1048576
[ 0.000000] pcpu-alloc: s77440 r8192 d20864 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 [1] 2 3
[ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 1032302
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: fastboot earlyprintk=serial,ttyS0,115200 console=ttyS0,115200 console=tty1 crypt_root=/dev/md3 radeon.modeset=1 video=1280x1024
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ b7f0000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000
[ 0.000000] Subtract (58 early reservations)
[ 0.000000] #1 [0001000000 - 0001bb9498] TEXT DATA BSS
[ 0.000000] #2 [0037ec8000 - 0037ff0000] RAMDISK
[ 0.000000] #3 [0001bba000 - 0001bba238] BRK
[ 0.000000] #4 [00000ff790 - 0000100000] BIOS reserved
[ 0.000000] #5 [00000ff780 - 00000ff790] MP-table mpf
[ 0.000000] #6 [000009fc00 - 00000f16f0] BIOS reserved
[ 0.000000] #7 [00000f188c - 00000ff780] BIOS reserved
[ 0.000000] #8 [00000f16f0 - 00000f188c] MP-table mpc
[ 0.000000] #9 [0000001000 - 0000003000] TRAMPOLINE
[ 0.000000] #10 [0000008000 - 000000c000] PGTABLE
[ 0.000000] #11 [000000c000 - 000000d000] PGTABLE
[ 0.000000] #12 [0001bba240 - 0001bbc240] NODE_DATA
[ 0.000000] #13 [0100000000 - 0100002000] NODE_DATA
[ 0.000000] #14 [0001bbc240 - 0001bbd240] BOOTMEM
[ 0.000000] #15 [0001bb94c0 - 0001bb9640] BOOTMEM
[ 0.000000] #16 [0080000000 - 0080000180] BOOTMEM
[ 0.000000] #17 [00023be000 - 00023bf000] BOOTMEM
[ 0.000000] #18 [00023bf000 - 00023c0000] BOOTMEM
[ 0.000000] #19 [0002400000 - 0004000000] MEMMAP 0
[ 0.000000] #20 [0100200000 - 0102000000] MEMMAP 1
[ 0.000000] #21 [0001bb9640 - 0001bb97c0] BOOTMEM
[ 0.000000] #22 [0001bbd240 - 0001bc9240] BOOTMEM
[ 0.000000] #23 [0080000180 - 008000c180] BOOTMEM
[ 0.000000] #24 [008000c180 - 008000f180] BOOTMEM
[ 0.000000] #25 [0001bca000 - 0001bcb000] BOOTMEM
[ 0.000000] #26 [0001bb97c0 - 0001bb9801] BOOTMEM
[ 0.000000] #27 [0001bb9840 - 0001bb9883] BOOTMEM
[ 0.000000] #28 [0001bb98c0 - 0001bb9b28] BOOTMEM
[ 0.000000] #29 [0001bb9b40 - 0001bb9ba8] BOOTMEM
[ 0.000000] #30 [0001bb9bc0 - 0001bb9c28] BOOTMEM
[ 0.000000] #31 [0001bb9c40 - 0001bb9ca8] BOOTMEM
[ 0.000000] #32 [0001bb9cc0 - 0001bb9d28] BOOTMEM
[ 0.000000] #33 [0001bb9d40 - 0001bb9da8] BOOTMEM
[ 0.000000] #34 [0001bb9dc0 - 0001bb9e28] BOOTMEM
[ 0.000000] #35 [0001bb9e40 - 0001bb9ea8] BOOTMEM
[ 0.000000] #36 [0001bb9ec0 - 0001bb9f28] BOOTMEM
[ 0.000000] #37 [0001bb9f40 - 0001bb9fa8] BOOTMEM
[ 0.000000] #38 [0001bc9240 - 0001bc92a8] BOOTMEM
[ 0.000000] #39 [0001bc92c0 - 0001bc9340] BOOTMEM
[ 0.000000] #40 [0001bc9340 - 0001bc93c0] BOOTMEM
[ 0.000000] #41 [0001c00000 - 0001c1a000] BOOTMEM
[ 0.000000] #42 [0001d00000 - 0001d1a000] BOOTMEM
[ 0.000000] #43 [0080200000 - 008021a000] BOOTMEM
[ 0.000000] #44 [0080300000 - 008031a000] BOOTMEM
[ 0.000000] #45 [0001bb9fc0 - 0001bb9fd0] BOOTMEM
[ 0.000000] #46 [0001bc93c0 - 0001bc93d0] BOOTMEM
[ 0.000000] #47 [0001bc9400 - 0001bc9410] BOOTMEM
[ 0.000000] #48 [0001bc9440 - 0001bc9460] BOOTMEM
[ 0.000000] #49 [0001bc9480 - 0001bc95c0] BOOTMEM
[ 0.000000] #50 [0001bc95c0 - 0001bc9620] BOOTMEM
[ 0.000000] #51 [0001bc9640 - 0001bc96a0] BOOTMEM
[ 0.000000] #52 [0001bcb000 - 0001bd3000] BOOTMEM
[ 0.000000] #53 [0020000000 - 0024000000] BOOTMEM
[ 0.000000] #54 [0004000000 - 0008000000] BOOTMEM
[ 0.000000] #55 [0001bd3000 - 0001bf3000] BOOTMEM
[ 0.000000] #56 [0001c1a000 - 0001c5a000] BOOTMEM
[ 0.000000] #57 [000000d000 - 0000015000] BOOTMEM
[ 0.000000] Memory: 3989024k/4718592k available (5480k kernel code, 524872k absent, 204696k reserved, 5458k data, 552k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=2
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 4
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:4352 nr_irqs:712
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty1] enabled, bootconsole disabled
[ 0.000000] Linux version 2.6.35-rc2 (root@treogen) (gcc version 4.4.3 (Gentoo 4.4.3-r2 p1.2) ) #1 SMP Sun Jun 6 11:39:15 CEST 2010
[ 0.000000] Command line: fastboot earlyprintk=serial,ttyS0,115200 console=ttyS0,115200 console=tty1 crypt_root=/dev/md3 radeon.modeset=1 video=1280x1024
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000dffd0000 (usable)
[ 0.000000] BIOS-e820: 00000000dffd0000 - 00000000dffde000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000dffde000 - 00000000e0000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
[ 0.000000] bootconsole [earlyser0] enabled
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x400000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xdffd0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] init_memory_mapping: 0000000000000000-00000000dffd0000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000120000000
[ 0.000000] RAMDISK: 37ec8000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000fb080 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000dffd0100 00064 (v01 A_M_I_ OEMXSDT 04000713 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000dffd0290 000F4 (v03 A_M_I_ OEMFACP 04000713 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000dffd0450 04FC5 (v01 S0027 S0027000 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000dffde000 00040
[ 0.000000] ACPI: APIC 00000000dffd0390 00080 (v01 A_M_I_ OEMAPIC 04000713 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000dffd0410 0003C (v01 A_M_I_ OEMMCFG 04000713 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000dffde040 00060 (v01 A_M_I_ AMI_OEM 04000713 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000dffd5420 00038 (v01 A_M_I_ OEMHPET0 04000713 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000dffd5460 0003C (v01 A_M_I_ OEMMCFG 04000713 MSFT 00000097)
[ 0.000000] ACPI: SRAT 00000000dffd54a0 00110 (v01 AMD HAMMER 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 00000000dffd55b0 004F0 (v01 A_M_I_ POWERNOW 00000001 AMD 00000001)
[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 0x02 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x03 -> Node 1
[ 0.000000] SRAT: Node 0 PXM 0 0-a0000
[ 0.000000] SRAT: Node 0 PXM 0 100000-80000000
[ 0.000000] SRAT: Node 1 PXM 1 80000000-e0000000
[ 0.000000] SRAT: Node 1 PXM 1 100000000-120000000
[ 0.000000] SRAT: Node 0 [0,a0000) + [100000,80000000) -> [0,80000000)
[ 0.000000] SRAT: Node 1 [80000000,e0000000) + [100000000,120000000) -> [80000000,120000000)
[ 0.000000] Initmem setup node 0 0000000000000000-0000000080000000
[ 0.000000] NODE_DATA [0000000001bba240 - 0000000001bbc23f]
[ 0.000000] Initmem setup node 1 0000000080000000-0000000120000000
[ 0.000000] NODE_DATA [0000000100000000 - 0000000100001fff]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000001 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00120000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000001 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x00080000
[ 0.000000] 1: 0x00080000 -> 0x000dffd0
[ 0.000000] 1: 0x00100000 -> 0x00120000
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x2008
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:1ec00000)
[ 0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:2
[ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff880001c00000 s77440 r8192 d20864 u1048576
[ 0.000000] pcpu-alloc: s77440 r8192 d20864 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 [1] 2 3
[ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 1032302
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: fastboot earlyprintk=serial,ttyS0,115200 console=ttyS0,115200 console=tty1 crypt_root=/dev/md3 radeon.modeset=1 video=1280x1024
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ b7f0000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000
[ 0.000000] Subtract (58 early reservations)
[ 0.000000] #1 [0001000000 - 0001bb9498] TEXT DATA BSS
[ 0.000000] #2 [0037ec8000 - 0037ff0000] RAMDISK
[ 0.000000] #3 [0001bba000 - 0001bba238] BRK
[ 0.000000] #4 [00000ff790 - 0000100000] BIOS reserved
[ 0.000000] #5 [00000ff780 - 00000ff790] MP-table mpf
[ 0.000000] #6 [000009fc00 - 00000f16f0] BIOS reserved
[ 0.000000] #7 [00000f188c - 00000ff780] BIOS reserved
[ 0.000000] #8 [00000f16f0 - 00000f188c] MP-table mpc
[ 0.000000] #9 [0000001000 - 0000003000] TRAMPOLINE
[ 0.000000] #10 [0000008000 - 000000c000] PGTABLE
[ 0.000000] #11 [000000c000 - 000000d000] PGTABLE
[ 0.000000] #12 [0001bba240 - 0001bbc240] NODE_DATA
[ 0.000000] #13 [0100000000 - 0100002000] NODE_DATA
[ 0.000000] #14 [0001bbc240 - 0001bbd240] BOOTMEM
[ 0.000000] #15 [0001bb94c0 - 0001bb9640] BOOTMEM
[ 0.000000] #16 [0080000000 - 0080000180] BOOTMEM
[ 0.000000] #17 [00023be000 - 00023bf000] BOOTMEM
[ 0.000000] #18 [00023bf000 - 00023c0000] BOOTMEM
[ 0.000000] #19 [0002400000 - 0004000000] MEMMAP 0
[ 0.000000] #20 [0100200000 - 0102000000] MEMMAP 1
[ 0.000000] #21 [0001bb9640 - 0001bb97c0] BOOTMEM
[ 0.000000] #22 [0001bbd240 - 0001bc9240] BOOTMEM
[ 0.000000] #23 [0080000180 - 008000c180] BOOTMEM
[ 0.000000] #24 [008000c180 - 008000f180] BOOTMEM
[ 0.000000] #25 [0001bca000 - 0001bcb000] BOOTMEM
[ 0.000000] #26 [0001bb97c0 - 0001bb9801] BOOTMEM
[ 0.000000] #27 [0001bb9840 - 0001bb9883] BOOTMEM
[ 0.000000] #28 [0001bb98c0 - 0001bb9b28] BOOTMEM
[ 0.000000] #29 [0001bb9b40 - 0001bb9ba8] BOOTMEM
[ 0.000000] #30 [0001bb9bc0 - 0001bb9c28] BOOTMEM
[ 0.000000] #31 [0001bb9c40 - 0001bb9ca8] BOOTMEM
[ 0.000000] #32 [0001bb9cc0 - 0001bb9d28] BOOTMEM
[ 0.000000] #33 [0001bb9d40 - 0001bb9da8] BOOTMEM
[ 0.000000] #34 [0001bb9dc0 - 0001bb9e28] BOOTMEM
[ 0.000000] #35 [0001bb9e40 - 0001bb9ea8] BOOTMEM
[ 0.000000] #36 [0001bb9ec0 - 0001bb9f28] BOOTMEM
[ 0.000000] #37 [0001bb9f40 - 0001bb9fa8] BOOTMEM
[ 0.000000] #38 [0001bc9240 - 0001bc92a8] BOOTMEM
[ 0.000000] #39 [0001bc92c0 - 0001bc9340] BOOTMEM
[ 0.000000] #40 [0001bc9340 - 0001bc93c0] BOOTMEM
[ 0.000000] #41 [0001c00000 - 0001c1a000] BOOTMEM
[ 0.000000] #42 [0001d00000 - 0001d1a000] BOOTMEM
[ 0.000000] #43 [0080200000 - 008021a000] BOOTMEM
[ 0.000000] #44 [0080300000 - 008031a000] BOOTMEM
[ 0.000000] #45 [0001bb9fc0 - 0001bb9fd0] BOOTMEM
[ 0.000000] #46 [0001bc93c0 - 0001bc93d0] BOOTMEM
[ 0.000000] #47 [0001bc9400 - 0001bc9410] BOOTMEM
[ 0.000000] #48 [0001bc9440 - 0001bc9460] BOOTMEM
[ 0.000000] #49 [0001bc9480 - 0001bc95c0] BOOTMEM
[ 0.000000] #50 [0001bc95c0 - 0001bc9620] BOOTMEM
[ 0.000000] #51 [0001bc9640 - 0001bc96a0] BOOTMEM
[ 0.000000] #52 [0001bcb000 - 0001bd3000] BOOTMEM
[ 0.000000] #53 [0020000000 - 0024000000] BOOTMEM
[ 0.000000] #54 [0004000000 - 0008000000] BOOTMEM
[ 0.000000] #55 [0001bd3000 - 0001bf3000] BOOTMEM
[ 0.000000] #56 [0001c1a000 - 0001c5a000] BOOTMEM
[ 0.000000] #57 [000000d000 - 0000015000] BOOTMEM
[ 0.000000] Memory: 3989024k/4718592k available (5480k kernel code, 524872k absent, 204696k reserved, 5458k data, 552k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=2
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 4
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:4352 nr_irqs:712
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty1] enabled, bootconsole disabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2599.983 MHz processor.
[ 0.020011] Calibrating delay loop (skipped), value calculated using timer frequency.. 5199.96 BogoMIPS (lpj=25999830)
[ 0.030002] pid_max: default: 32768 minimum: 301
[ 0.035205] Security Framework initialized
[ 0.040250] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.050162] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.058547] Mount-cache hash table entries: 256
[ 0.060155] CPU: Physical Processor ID: 0
[ 0.064167] CPU: Processor Core ID: 0
[ 0.070003] mce: CPU supports 5 MCE banks
[ 0.074023] using C1E aware idle routine
[ 0.077951] Performance Events: AMD PMU driver.
[ 0.081501] ... version: 0
[ 0.085511] ... bit width: 48
[ 0.090001] ... generic registers: 4
[ 0.094009] ... value mask: 0000ffffffffffff
[ 0.100001] ... max period: 00007fffffffffff
[ 0.105314] ... fixed-purpose events: 0
[ 0.110001] ... event mask: 000000000000000f
[ 0.115330] Freeing SMP alternatives: 20k freed
[ 0.120012] ACPI: Core revision 20100428
[ 0.131189] Setting APIC routing to flat
[ 0.135546] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.241581] CPU0: Dual-Core AMD Opteron(tm) Processor 2218 stepping 02
[ 0.250000] Booting Node 0, Processors #1 Ok.
[ 0.400680] Booting Node 1, Processors #2 #3 Ok.
[ 0.720085] Brought up 4 CPUs
[ 0.723063] Total of 4 processors activated (20800.08 BogoMIPS).
[ 0.730040] NET: Registered protocol family 16
[ 0.734501] TOM: 00000000e0000000 aka 3584M
[ 0.734501] TOM2: 0000000120000000 aka 4608M
[ 0.740015] ACPI: bus type pci registered
[ 0.744036] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xf0000000-0xffffffff] (base 0xf0000000)
[ 0.750002] PCI: not using MMCONFIG
[ 0.760001] PCI: Using configuration type 1 for base access
[ 0.770043] bio: create slab <bio-0> at 0
[ 0.781498] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.794828] ACPI: Interpreter enabled
[ 0.798493] ACPI: (supports S0 S5)
[ 0.800590] ACPI: Using IOAPIC for interrupt routing
[ 0.805597] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xf0000000-0xffffffff] (base 0xf0000000)
[ 0.824216] [Firmware Bug]: PCI: MMCONFIG at [mem 0xf0000000-0xffffffff] not reserved in ACPI motherboard resources
[ 0.830001] PCI: not using MMCONFIG
[ 0.840674] ACPI Warning: Incorrect checksum in table [OEMB] - 0xEC, should be 0xE7 (20100428/tbutils-314)
[ 0.857222] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.860257] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.871049] pci 0000:00:06.0: PCI bridge to [bus 05-05] (subtractive decode)
[ 0.880144] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.890007] pci 0000:00:0b.0: PCI bridge to [bus 04-04]
[ 0.910008] pci 0000:00:0c.0: PCI bridge to [bus 03-03]
[ 0.930007] pci 0000:00:0d.0: PCI bridge to [bus 02-02]
[ 0.935348] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.940005] pci 0000:00:0f.0: PCI bridge to [bus 01-01]
[ 0.960366] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *11
[ 0.966762] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
[ 0.972949] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *10
[ 0.981771] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[ 0.989253] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *10
[ 0.992069] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10
[ 1.002057] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
[ 1.010157] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *5
[ 1.016657] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10
[ 1.022913] ACPI: PCI Interrupt Link [LMAD] (IRQs 20 21 22 23) *0, disabled.
[ 1.031374] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11
[ 1.037971] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled.
[ 1.042956] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11
[ 1.052057] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
[ 1.058636] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *5
[ 1.061985] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
[ 1.071971] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *10
[ 1.078593] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[ 1.083081] ACPI: PCI Interrupt Link [LSA2] (IRQs 20 21 22 23) *10
[ 1.091904] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.100002] vgaarb: loaded
[ 1.102782] SCSI subsystem initialized
[ 1.103760] usbcore: registered new interface driver usbfs
[ 1.110012] usbcore: registered new interface driver hub
[ 1.115318] usbcore: registered new device driver usb
[ 1.120015] Advanced Linux Sound Architecture Driver Version 1.0.23.
[ 1.130001] PCI: Using ACPI for IRQ routing
[ 1.134271] NetLabel: Initializing
[ 1.134271] NetLabel: domain hash size = 128
[ 1.140001] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.144973] NetLabel: unlabeled traffic allowed by default
[ 1.150004] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 1.160005] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 1.165102] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 1.200028] Switching to clocksource hpet
[ 1.204046] Slow work thread pool: Starting up
[ 1.204571] Slow work thread pool: Ready
[ 1.208532] FS-Cache: Loaded
[ 1.211689] CacheFiles: Loaded
[ 1.214759] pnp: PnP ACPI init
[ 1.217822] ACPI: bus type pnp registered
[ 1.227230] pnp: PnP ACPI: found 14 devices
[ 1.231435] ACPI: ACPI bus type pnp unregistered
[ 1.236062] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 1.242007] system 00:06: [io 0x07b0-0x07df] has been reserved
[ 1.247926] system 00:06: [io 0x0800-0x080f] has been reserved
[ 1.253872] system 00:06: [io 0x0bb0-0x0bdf] has been reserved
[ 1.259791] system 00:06: [io 0x2000-0x207f] has been reserved
[ 1.265735] system 00:06: [io 0x2080-0x20ff] has been reserved
[ 1.271674] system 00:06: [io 0x2400-0x247f] has been reserved
[ 1.277766] system 00:06: [io 0x2480-0x24ff] has been reserved
[ 1.283712] system 00:06: [io 0x2800-0x287f] has been reserved
[ 1.289629] system 00:06: [io 0x2880-0x28ff] has been reserved
[ 1.295577] system 00:06: [io 0x2c00-0x2c7f] has been reserved
[ 1.301513] system 00:06: [io 0x2c80-0x2cff] has been reserved
[ 1.307433] system 00:06: [mem 0x000d0000-0x000d3fff window] has been reserved
[ 1.314685] system 00:06: [mem 0x000d4000-0x000d7fff window] has been reserved
[ 1.321921] system 00:06: [mem 0x000de000-0x000dffff window] has been reserved
[ 1.329140] system 00:06: [mem 0xfee01000-0xfeefffff] has been reserved
[ 1.335780] system 00:06: [mem 0xefa80000-0xefabffff] has been reserved
[ 1.342558] system 00:06: [mem 0xffb00000-0xffbfffff] has been reserved
[ 1.349170] system 00:06: [mem 0xfff00000-0xffffffff] has been reserved
[ 1.355812] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 1.362786] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
[ 1.369400] system 00:0c: [io 0x0290-0x0297] has been reserved
[ 1.375354] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[ 1.382331] system 00:0d: [mem 0x000c0000-0x000cffff] has been reserved
[ 1.388939] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
[ 1.395927] system 00:0d: [mem 0x00100000-0xdfffffff] could not be reserved
[ 1.403008] system 00:0d: [mem 0xfec00000-0xffffffff] could not be reserved
[ 1.415484] pci 0000:00:06.0: PCI bridge to [bus 05-05]
[ 1.420732] pci 0000:00:06.0: bridge window [io disabled]
[ 1.426392] pci 0000:00:06.0: bridge window [mem 0xeff00000-0xefffffff]
[ 1.433202] pci 0000:00:06.0: bridge window [mem 0xeef00000-0xeeffffff pref]
[ 1.440440] pci 0000:00:0b.0: PCI bridge to [bus 04-04]
[ 1.445665] pci 0000:00:0b.0: bridge window [io 0xe000-0xefff]
[ 1.451784] pci 0000:00:0b.0: bridge window [mem 0xefe00000-0xefefffff]
[ 1.458567] pci 0000:00:0b.0: bridge window [mem pref disabled]
[ 1.464689] pci 0000:00:0c.0: PCI bridge to [bus 03-03]
[ 1.470035] pci 0000:00:0c.0: bridge window [io disabled]
[ 1.475695] pci 0000:00:0c.0: bridge window [mem 0xefd00000-0xefdfffff]
[ 1.482511] pci 0000:00:0c.0: bridge window [mem pref disabled]
[ 1.488601] pci 0000:00:0d.0: PCI bridge to [bus 02-02]
[ 1.493852] pci 0000:00:0d.0: bridge window [io disabled]
[ 1.499511] pci 0000:00:0d.0: bridge window [mem 0xefc00000-0xefcfffff]
[ 1.506323] pci 0000:00:0d.0: bridge window [mem pref disabled]
[ 1.512434] pci 0000:00:0f.0: PCI bridge to [bus 01-01]
[ 1.517660] pci 0000:00:0f.0: bridge window [io 0xd000-0xdfff]
[ 1.523780] pci 0000:00:0f.0: bridge window [mem 0xefb00000-0xefbfffff]
[ 1.530745] pci 0000:00:0f.0: bridge window [mem 0xe0000000-0xe7ffffff 64bit pref]
[ 1.538563] NET: Registered protocol family 2
[ 1.543094] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.551890] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.564221] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.571515] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.578123] TCP reno registered
[ 1.581313] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.587371] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.594093] NET: Registered protocol family 1
[ 1.598616] RPC: Registered udp transport module.
[ 1.603340] RPC: Registered tcp transport module.
[ 1.608045] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.636221] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.641764] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.647290] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.652841] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.658369] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.663929] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.669460] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.675028] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.680569] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.686146] Unpacking initramfs...
[ 1.711869] Freeing initrd memory: 1184k freed
[ 1.716840] PCI-DMA: Disabling AGP.
[ 1.721191] PCI-DMA: aperture base @ 20000000 size 65536 KB
[ 1.726758] PCI-DMA: using GART IOMMU.
[ 1.730542] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 1.742767] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.752500] VFS: Disk quotas dquot_6.5.2
[ 1.756523] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.763131] FS-Cache: Netfs 'nfs' registered for caching
[ 1.768659] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
[ 1.778286] SGI XFS Quota Management subsystem
[ 1.782752] msgmni has been set to 7922
[ 1.787489] alg: No test for stdrng (krng)
[ 1.796305] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[ 1.802366] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[ 1.809758] io scheduler noop registered
[ 1.813787] io scheduler cfq registered (default)
[ 1.819518] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.827887] ACPI: Power Button [PWRB]
[ 1.831639] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.839033] ACPI: Power Button [PWRF]
[ 1.846826] Real Time Clock Driver v1.12b
[ 1.851098] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
[ 1.860078] Hangcheck: Using getrawmonotonic().
[ 1.864678] [drm] Initialized drm 1.1.0 20060810
[ 1.869350] [drm] radeon kernel modesetting enabled.
[ 1.874666] ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 19
[ 1.880440] radeon 0000:01:00.0: PCI INT A -> Link[LNEB] -> GSI 19 (level, low) -> IRQ 19
[ 1.890815] [drm] initializing kernel modesetting (RV380 0x1002:0x5B60).
[ 1.897672] [drm] register mmio base: 0xEFBF0000
[ 1.902308] [drm] register mmio size: 65536
[ 1.907118] [drm] Generation 2 PCI interface, using max accessible memory
[ 1.913936] radeon 0000:01:00.0: VRAM: 128M 0xE0000000 - 0xE7FFFFFF (128M used)
[ 1.921258] radeon 0000:01:00.0: GTT: 512M 0xC0000000 - 0xDFFFFFFF
[ 1.927477] [drm] radeon: using MSI.
[ 1.931109] [drm] radeon: irq initialized.
[ 1.936021] [drm] Detected VRAM RAM=128M, BAR=128M
[ 1.940854] [drm] RAM width 64bits DDR
[ 1.944709] [TTM] Zone kernel: Available graphics memory: 2028090 kiB.
[ 1.951340] [TTM] Initializing pool allocator.
[ 1.955806] [drm] radeon: 128M of VRAM memory ready
[ 1.960708] [drm] radeon: 512M of GTT memory ready.
[ 1.965607] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 1.972842] [drm] radeon: 1 quad pipes, 1 Z pipes initialized.
[ 1.979404] [drm] PCIE GART of 512M enabled (table at 0xE0040000).
[ 1.985748] [drm] Loading R300 Microcode
[ 1.989839] [drm] radeon: ring at 0x00000000C0000000
[ 1.994838] [drm] ring test succeeded in 1 usecs
[ 1.999547] [drm] radeon: ib pool ready.
[ 2.003566] [drm] ib test succeeded in 0 usecs
[ 2.008210] [drm] Default TV standard: NTSC
[ 2.012413] [drm] 27.000000000 MHz TV ref clk
[ 2.016780] [drm] DFP table revision: 4
[ 2.020784] [drm] Default TV standard: NTSC
[ 2.024974] [drm] 27.000000000 MHz TV ref clk
[ 2.029441] [drm] Radeon Display Connectors
[ 2.033640] [drm] Connector 0:
[ 2.036703] [drm] VGA
[ 2.039160] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 2.045189] [drm] Encoders:
[ 2.048168] [drm] CRT1: INTERNAL_DAC1
[ 2.052201] [drm] Connector 1:
[ 2.055267] [drm] DVI-I
[ 2.057896] [drm] NONE
[ 2.060461] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[ 2.066467] [drm] Encoders:
[ 2.069441] [drm] CRT2: INTERNAL_DAC2
[ 2.073486] [drm] DFP1: INTERNAL_TMDS1
[ 2.077589] [drm] Connector 2:
[ 2.080671] [drm] S-video
[ 2.083477] [drm] Encoders:
[ 2.086451] [drm] TV1: INTERNAL_DAC2
[ 2.222670] [drm] fb mappable at 0xE00C0000
[ 2.226859] [drm] vram apper at 0xE0000000
[ 2.230987] [drm] size 5242880
[ 2.234051] [drm] fb depth is 24
[ 2.237285] [drm] pitch is 5120
[ 2.240807] fbcon: radeondrmfb (fb0) is primary device
[ 2.360480] Console: switching to colour frame buffer device 160x64
[ 2.373024] fb0: radeondrmfb frame buffer device
[ 2.377664] drm: registered panic notifier
[ 2.381806] [drm] Initialized radeon 2.4.0 20080528 for 0000:01:00.0 on minor 0
[ 2.389254] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[ 2.395797] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.402150] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.408205] sata_sil24 0000:04:00.0: PCI INT A -> Link[LNEB] -> GSI 19 (level, low) -> IRQ 19
[ 2.417075] scsi0 : sata_sil24
[ 2.420307] scsi1 : sata_sil24
[ 2.423492] ata1: SATA max UDMA/100 host m128@0xefeffc00 port 0xefef8000 irq 19
[ 2.430858] ata2: SATA max UDMA/100 host m128@0xefeffc00 port 0xefefa000 irq 19
[ 2.438674] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[ 2.444488] sata_nv 0000:00:05.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
[ 2.452820] sata_nv 0000:00:05.0: Using SWNCQ mode
[ 2.457782] scsi2 : sata_nv
[ 2.460734] scsi3 : sata_nv
[ 2.463749] ata3: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 23
[ 2.470941] ata4: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 23
[ 2.478428] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 22
[ 2.484231] sata_nv 0000:00:05.1: PCI INT B -> Link[LSA1] -> GSI 22 (level, low) -> IRQ 22
[ 2.492556] sata_nv 0000:00:05.1: Using SWNCQ mode
[ 2.497524] scsi4 : sata_nv
[ 2.500472] scsi5 : sata_nv
[ 2.503489] ata5: SATA max UDMA/133 cmd 0xc080 ctl 0xc000 bmdma 0xb800 irq 22
[ 2.510688] ata6: SATA max UDMA/133 cmd 0xbc00 ctl 0xb880 bmdma 0xb808 irq 22
[ 2.518203] ACPI: PCI Interrupt Link [LSA2] enabled at IRQ 21
[ 2.524014] sata_nv 0000:00:05.2: PCI INT C -> Link[LSA2] -> GSI 21 (level, low) -> IRQ 21
[ 2.532335] sata_nv 0000:00:05.2: Using SWNCQ mode
[ 2.537309] scsi6 : sata_nv
[ 2.540256] scsi7 : sata_nv
[ 2.543269] ata7: SATA max UDMA/133 cmd 0xb480 ctl 0xb400 bmdma 0xac00 irq 21
[ 2.550457] ata8: SATA max UDMA/133 cmd 0xb080 ctl 0xb000 bmdma 0xac08 irq 21
[ 2.557884] scsi8 : pata_amd
[ 2.560962] scsi9 : pata_amd
[ 2.564815] ata9: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 2.571821] ata10: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 2.579133] tg3.c:v3.110 (April 9, 2010)
[ 2.583352] ACPI: PCI Interrupt Link [LNEA] enabled at IRQ 18
[ 2.589134] tg3 0000:03:00.0: PCI INT A -> Link[LNEA] -> GSI 18 (level, low) -> IRQ 18
[ 2.645558] tg3 0000:03:00.0: eth0: Tigon3 [partno(BCM95700A6) rev b002] (PCI Express) MAC address 00:17:31:f9:cc:c5
[ 2.657867] tg3 0000:03:00.0: eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1])
[ 2.668819] tg3 0000:03:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 2.678377] tg3 0000:03:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 2.687109] ACPI: PCI Interrupt Link [LNED] enabled at IRQ 17
[ 2.694584] tg3 0000:02:00.0: PCI INT A -> Link[LNED] -> GSI 17 (level, low) -> IRQ 17
[ 2.755333] tg3 0000:02:00.0: eth1: Tigon3 [partno(BCM95700A6) rev b002] (PCI Express) MAC address 00:18:f3:44:df:ea
[ 2.767905] tg3 0000:02:00.0: eth1: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1])
[ 2.779023] tg3 0000:02:00.0: eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 2.788843] tg3 0000:02:00.0: eth1: dma_rwctrl[76180000] dma_mask[64-bit]
[ 2.798044] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 16
[ 2.805718] ohci1394 0000:05:08.0: PCI INT A -> Link[LNKA] -> GSI 16 (level, low) -> IRQ 16
[ 2.840022] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.870049] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[effff800-efffffff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 2.883773] ata7: SATA link down (SStatus 0 SControl 300)
[ 2.884267] eth1394: eth2: IPv4 over IEEE 1394 (fw-host0)
[ 2.884395] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.884688] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 20
[ 2.884701] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 20 (level, low) -> IRQ 20
[ 2.884716] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 2.884725] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 2.884747] ehci_hcd 0000:00:02.1: debug port 1
[ 2.884781] ehci_hcd 0000:00:02.1: irq 20, io mem 0xefaebc00
[ 2.960020] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 2.960030] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.976447] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.985699] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.995381] usb usb1: Product: EHCI Host Controller
[ 3.002547] usb usb1: Manufacturer: Linux 2.6.35-rc2 ehci_hcd
[ 3.010779] usb usb1: SerialNumber: 0000:00:02.1
[ 3.017787] hub 1-0:1.0: USB hub found
[ 3.021613] ata3.00: ATA-7: MAXTOR STM3320820AS, 3.AAE, max UDMA/133
[ 3.021616] ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 3.041596] hub 1-0:1.0: 10 ports detected
[ 3.048268] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.057277] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[ 3.065322] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 23 (level, low) -> IRQ 23
[ 3.075961] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 3.083772] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 3.093572] ohci_hcd 0000:00:02.0: irq 23, io mem 0xefaf8000
[ 3.121561] ata3.00: configured for UDMA/133
[ 3.162020] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.171140] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.180828] usb usb2: Product: OHCI Host Controller
[ 3.187913] usb usb2: Manufacturer: Linux 2.6.35-rc2 ohci_hcd
[ 3.196385] usb usb2: SerialNumber: 0000:00:02.0
[ 3.203320] hub 2-0:1.0: USB hub found
[ 3.209411] hub 2-0:1.0: 10 ports detected
[ 3.215924] Initializing USB Mass Storage driver...
[ 3.223105] usbcore: registered new interface driver usb-storage
[ 3.231616] USB Mass Storage support registered.
[ 3.238575] usbcore: registered new interface driver libusual
[ 3.246960] usbcore: registered new interface driver ums-alauda
[ 3.255241] usbcore: registered new interface driver ums-cypress
[ 3.263545] usbcore: registered new interface driver ums-datafab
[ 3.271686] usbcore: registered new interface driver ums-freecom
[ 3.280177] usbcore: registered new interface driver ums-isd200
[ 3.288217] usbcore: registered new interface driver ums-jumpshot
[ 3.296755] usbcore: registered new interface driver ums-karma
[ 3.304852] usbcore: registered new interface driver ums-sddr09
[ 3.312818] usbcore: registered new interface driver ums-sddr55
[ 3.320794] usbcore: registered new interface driver ums-usbat
[ 3.328826] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 3.340579] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.347666] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.354860] mice: PS/2 mouse device common for all mice
[ 3.362261] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 3.370872] I2O subsystem v1.325
[ 3.376184] i2o: max drivers = 8
[ 3.381753] i2c /dev entries driver
[ 3.382601] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 3.398051] i2c i2c-2: nForce2 SMBus adapter at 0x2a00
[ 3.405185] i2c i2c-3: nForce2 SMBus adapter at 0x2a80
[ 3.412222] IR NEC protocol handler initialized
[ 3.418650] IR RC5(x) protocol handler initialized
[ 3.425314] IR RC6 protocol handler initialized
[ 3.431742] IR JVC protocol handler initialized
[ 3.437916] IR Sony protocol handler initialized
[ 3.444382] Linux video capture interface: v2.00
[ 3.450988] bttv: driver version 0.9.18 loaded
[ 3.457165] bttv: using 8 buffers with 2080k (520 pages) each for capture
[ 3.465833] bttv: Bt8xx card found (0).
[ 3.471552] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 19
[ 3.479215] bttv 0000:05:06.0: PCI INT A -> Link[LNKC] -> GSI 19 (level, low) -> IRQ 19
[ 3.488927] bttv0: Bt878 (rev 17) at 0000:05:06.0, irq: 19, latency: 64, mmio: 0xeefff000
[ 3.498842] bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb
[ 3.508366] bttv0: using: Hauppauge (bt878) [card=10,autodetected]
[ 3.518937] bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
[ 3.553767] usb 2-6: new low speed USB device using ohci_hcd and address 2
[ 3.556404] tveeprom 4-0050: Hauppauge model 61344, rev D421, serial# 3902813
[ 3.556407] tveeprom 4-0050: tuner model is Philips FM1216 (idx 21, type 5)
[ 3.556409] tveeprom 4-0050: TV standards PAL(B/G) (eeprom 0x04)
[ 3.556411] tveeprom 4-0050: audio processor is MSP3415 (idx 6)
[ 3.556413] tveeprom 4-0050: has radio
[ 3.556414] bttv0: Hauppauge eeprom indicates model#61344
[ 3.556415] bttv0: tuner type=5
[ 3.566986] msp3400 4-0040: MSP3415D-B3 found @ 0x80 (bt878 #0 [sw])
[ 3.566989] msp3400 4-0040: msp3400 supports nicam, mode is autodetect
[ 3.579332] tuner 4-0061: chip found @ 0xc2 (bt878 #0 [sw])
[ 3.579607] tuner-simple 4-0061: creating new instance
[ 3.579609] tuner-simple 4-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
[ 3.580327] bttv0: registered device video0
[ 3.580380] bttv0: registered device vbi0
[ 3.580437] bttv0: registered device radio0
[ 3.589839] bttv0: PLL: 28636363 => 35468950 .. ok
[ 3.704982] Registered IR keymap rc-rc5-tv
[ 3.711067] input: i2c IR (Hauppauge) as /devices/virtual/rc/rc0/input4
[ 3.719674] rc0: i2c IR (Hauppauge) as /devices/virtual/rc/rc0
[ 3.727544] ir-kbd-i2c: i2c IR (Hauppauge) detected at i2c-4/4-0018/ir0 [bt878 #0 [sw]]
[ 3.851029] usb 2-6: New USB device found, idVendor=062a, idProduct=0000
[ 3.859556] usb 2-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.570036] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
[ 4.584266] ata1.00: ATA-7: SAMSUNG HD642JJ, 1AA01113, max UDMA7
[ 4.592090] ata1.00: 1250263728 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 4.602570] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 4.607295] ata1.00: configured for UDMA/100
[ 4.607402] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD642JJ 1AA0 PQ: 0 ANSI: 5
[ 4.607743] sd 0:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[ 4.607853] sd 0:0:0:0: [sda] Write Protect is off
[ 4.607897] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.608119] sda: sda1 sda2 sda3
[ 4.662632] k8temp 0000:00:19.3: Temperature readouts might be wrong - check erratum #141
[ 4.662886] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.679987] md: raid1 personality registered for level 1
[ 4.687604] device-mapper: uevent: version 1.0.3
[ 4.694677] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[ 4.705249] EDAC MC: Ver: 2.1.0 Jun 6 2010
[ 4.711717] EDAC amd64_edac: Ver: 3.3.0 Jun 6 2010
[ 4.718974] EDAC amd64: ECC is enabled by BIOS.
[ 4.725900] EDAC amd64: ECC is enabled by BIOS.
[ 4.733048] EDAC MC0: Giving out device to 'amd64_edac' 'RevF': DEV 0000:00:18.2
[ 4.742899] EDAC MC1: Giving out device to 'amd64_edac' 'RevF': DEV 0000:00:19.2
[ 4.752471] EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED)
[ 4.765926] cpuidle: using governor ladder
[ 4.772113] cpuidle: using governor menu
[ 4.780020] usbcore: registered new interface driver hiddev
[ 4.793326] input: HID 062a:0000 as /devices/pci0000:00/0000:00:02.0/usb2/2-6/2-6:1.0/input/input5
[ 4.804673] generic-usb 0003:062A:0000.0001: input,hidraw0: USB HID v1.10 Mouse [HID 062a:0000] on usb-0000:00:02.0-6/input0
[ 4.818288] usbcore: registered new interface driver usbhid
[ 4.826106] usbhid: USB HID core driver
[ 4.832535] Bt87x 0000:05:06.1: PCI INT A -> Link[LNKC] -> GSI 19 (level, low) -> IRQ 19
[ 4.843499] bt87x0: Using board 1, analog, digital (rate 32000 Hz)
[ 4.852597] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
[ 4.860602] HDA Intel 0000:00:06.1: PCI INT B -> Link[LAZA] -> GSI 22 (level, low) -> IRQ 22
[ 4.871687] hda_intel: Disable MSI for Nvidia chipset
[ 6.180410] ALSA device list:
[ 6.185944] #0: HDA NVidia at 0xefafc000 irq 22
[ 6.193024] #1: Brooktree Bt878 at 0xeeffe000, irq 19
[ 6.200794] Initializing XFRM netlink socket
[ 6.207388] NET: Registered protocol family 17
[ 6.214250] NET: Registered protocol family 15
[ 6.220922] powernow-k8: Found 2 Dual-Core AMD Opteron(tm) Processor 2218 (4 cpu cores) (version 2.20.00)
[ 6.233155] powernow-k8: 0 : fid 0x12 (2600 MHz), vid 0x8
[ 6.241464] powernow-k8: 1 : fid 0x10 (2400 MHz), vid 0xa
[ 6.249392] powernow-k8: 2 : fid 0xe (2200 MHz), vid 0xc
[ 6.257330] powernow-k8: 3 : fid 0xc (2000 MHz), vid 0xe
[ 6.265346] powernow-k8: 4 : fid 0xa (1800 MHz), vid 0x10
[ 6.273278] powernow-k8: 5 : fid 0x2 (1000 MHz), vid 0x12
[ 6.281598] powernow-k8: 0 : fid 0x12 (2600 MHz), vid 0x8
[ 6.289875] powernow-k8: 1 : fid 0x10 (2400 MHz), vid 0xa
[ 6.297629] powernow-k8: 2 : fid 0xe (2200 MHz), vid 0xc
[ 6.305526] powernow-k8: 3 : fid 0xc (2000 MHz), vid 0xe
[ 6.313428] powernow-k8: 4 : fid 0xa (1800 MHz), vid 0x10
[ 6.321222] powernow-k8: 5 : fid 0x2 (1000 MHz), vid 0x12
[ 6.520018] Clocksource tsc unstable (delta = -80820683 ns)
[ 6.820042] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
[ 6.836960] ata2.00: ATA-7: SAMSUNG HD642JJ, 1AA01113, max UDMA7
[ 6.847434] ata2.00: 1250263728 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 6.865133] ata2.00: configured for UDMA/100
[ 6.874005] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD642JJ 1AA0 PQ: 0 ANSI: 5
[ 6.887237] sd 1:0:0:0: [sdb] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[ 6.899518] scsi 2:0:0:0: Direct-Access ATA MAXTOR STM332082 3.AA PQ: 0 ANSI: 5
[ 6.899563] sd 1:0:0:0: [sdb] Write Protect is off
[ 6.899612] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.899883] sdb: sdb1 sdb2 sdb3
[ 6.943091] sd 2:0:0:0: [sdc] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 6.943516] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 6.964360] sd 2:0:0:0: [sdc] Write Protect is off
[ 6.973709] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.987533] sdc: sdc1 sdc2
[ 7.016124] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 7.270023] ata4: SATA link down (SStatus 0 SControl 300)
[ 7.600025] ata6: SATA link down (SStatus 0 SControl 300)
[ 7.930021] ata8: SATA link down (SStatus 0 SControl 300)
[ 7.939835] Freeing unused kernel memory: 552k freed
[ 7.949528] Write protecting the kernel read-only data: 10240k
[ 7.959960] Freeing unused kernel memory: 640k freed
[ 7.970034] Freeing unused kernel memory: 1696k freed
[ 90.040053] general protection fault: 0000 [#1] SMP
[ 90.045062] last sysfs file: /sys/devices/pci0000:00/0000:00:06.0/0000:05:06.0/resource
[ 90.050007] CPU 0
[ 90.050007] Modules linked in: sg
[ 90.050007]
[ 90.050007] Pid: 335, comm: kblockd/0 Not tainted 2.6.35-rc2 #1 KFN5-D SLI/KFN5-D SLI
[ 90.050007] RIP: 0010:[<ffffffff8135aa64>] [<ffffffff8135aa64>] ata_find_dev+0x24/0x90
[ 90.050007] RSP: 0018:ffff88007ffdbda0 EFLAGS: 00010082
[ 90.050007] RAX: 0720072007200720 RBX: ffff88007ffc7000 RCX: 0720072007202558
[ 90.050007] RDX: ffff880007009e38 RSI: 0000000000000000 RDI: ffff880007008000
[ 90.050007] RBP: ffff880006cef700 R08: 0000000000000001 R09: 0000000000000008
[ 90.050007] R10: 0000000000000000 R11: ffff88000723edb0 R12: ffff88007f3a3800
[ 90.050007] R13: ffff880007008000 R14: ffffffff81340f80 R15: ffff88007ffc7138
[ 90.050007] FS: 00007f558bc58700(0000) GS:ffff880001c00000(0000) knlGS:0000000000000000
[ 90.050007] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 90.050007] CR2: 00007fffa9653000 CR3: 0000000006429000 CR4: 00000000000006f0
[ 90.050007] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 90.050007] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 90.050007] Process kblockd/0 (pid: 335, threadinfo ffff88007ffda000, task ffff88007ff8a7d0)
[ 90.050007] Stack:
[ 90.050007] ffffffff8135ab25 ffffffff8135e7cb ffff880006cef700 ffff88007f3a3800
[ 90.050007] <0> ffff88000723ecd0 0000000000000287 ffff88007ffc7048 ffffffff81341c49
[ 90.050007] <0> ffff88000723ecd0 ffff88007ffc7000 ffff880007290000 ffff88000723ecd0
[ 90.050007] Call Trace:
[ 90.050007] [<ffffffff8135ab25>] ? ata_scsi_find_dev+0x5/0x30
[ 90.050007] [<ffffffff8135e7cb>] ? ata_scsi_queuecmd+0x4b/0x2c0
[ 90.050007] [<ffffffff81341c49>] ? scsi_dispatch_cmd+0xd9/0x210
[ 90.050007] [<ffffffff81348530>] ? scsi_request_fn+0x300/0x3e0
[ 90.050007] [<ffffffff811e31e0>] ? blk_unplug_work+0x0/0x20
[ 90.050007] [<ffffffff811e4624>] ? generic_unplug_device+0x24/0x30
[ 90.050007] [<ffffffff8104ca6b>] ? worker_thread+0xeb/0x180
[ 90.050007] [<ffffffff81050690>] ? autoremove_wake_function+0x0/0x30
[ 90.050007] [<ffffffff8104c980>] ? worker_thread+0x0/0x180
[ 90.050007] [<ffffffff810501fe>] ? kthread+0x8e/0xa0
[ 90.050007] [<ffffffff81003194>] ? kernel_thread_helper+0x4/0x10
[ 90.050007] [<ffffffff81050170>] ? kthread+0x0/0xa0
[ 90.050007] [<ffffffff81003190>] ? kernel_thread_helper+0x0/0x10
[ 90.050007] Code: 1f 84 00 00 00 00 00 8b 87 00 29 00 00 85 c0 75 46 48 8b 87 38 1e 00 00 48 8d 97 38 1e 00 00 48 8d 88 38 1e 00 00 48 39 ca 74 4c <48> 3b 90 f8 28 00 00 74 43 ba 01 00 00 00 39 d6 7d 47 48 63 f6
[ 90.050007] RIP [<ffffffff8135aa64>] ata_find_dev+0x24/0x90
[ 90.050007] RSP <ffff88007ffdbda0>
[ 90.050007] ---[ end trace c14df2a6b8b3b357 ]---
[ 261.953760] SysRq : Emergency Sync
[ 261.953760] Emergency Sync complete
[ 261.953760] SysRq : Emergency Remount R/O
[ 261.953760] SysRq : Emergency Sync
[ 261.953760] SysRq : Resetting
\
 
 \ /
  Last update: 2010-06-06 17:07    [W:0.318 / U:0.416 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site