lkml.org 
[lkml]   [2010]   [Nov]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH] ARM: l2x0: Check the correct address range
From: Boojin Kim <boojin.kim@samsung.com>

When flush or clean the 1MiB, it doesn't flush or clean all since it doesn't check the correct address. So Check the correct address range.

Signed-off-by: Boojin Kim <boojin.kim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
---
diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
index 170c9bb..50599d9 100644
--- a/arch/arm/mm/cache-l2x0.c
+++ b/arch/arm/mm/cache-l2x0.c
@@ -195,7 +195,7 @@ static void l2x0_clean_range(unsigned long start, unsigned long end)
void __iomem *base = l2x0_base;
unsigned long flags;

- if ((end - start) >= l2x0_size) {
+ if ((end - start + 1) >= l2x0_size) {
l2x0_clean_all();
return;
}
@@ -225,7 +225,7 @@ static void l2x0_flush_range(unsigned long start, unsigned long end)
void __iomem *base = l2x0_base;
unsigned long flags;

- if ((end - start) >= l2x0_size) {
+ if ((end - start + 1) >= l2x0_size) {
l2x0_flush_all();
return;
}

\
 
 \ /
  Last update: 2010-11-19 02:43    [W:0.062 / U:0.428 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site