lkml.org 
[lkml]   [2008]   [Feb]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: Aborted commands with arcmsr and 2xWD1500ADFD in RAID1
Date
Hi Aron,
Thanks for your patience.
If you still got into trouble, please let me know.
Thank you again,
-----Original Message-----
From: Aron Stansvik [mailto:elvstone@gmail.com]
Sent: Tuesday, February 26, 2008 6:52 AM
To: erich
Cc: nick.cheng@areca.com.tw; akpm@linux-foundation.org;
linux-scsi@vger.kernel.org; linux-kernel@vger.kernel.org
Subject: Re: Aborted commands with arcmsr and 2xWD1500ADFD in RAID1

Hi Erich.

2008/2/25, nickcheng <nick.cheng@areca.com.tw>:
> Hi Aron,
> From our field experiences and customers' feedbacks, all of them direct
to
> vibration and power issues.
> The vibration could be caused by FANs not only by themselves.

Okay. I have a chassi fan that is quite close to the drives, I will
try disabling it. I've also ordered two Nexus TwinDisk anti vibration
harddrive mounts with which I'll place the disks in my 5.25" slots
instead, away from any fans.

If this doesn't work, I'm stumped, as I really don't think it's the
power supply and I don't have the money to buy a new one.

> You mentioned it could be the F/W issue.
> If the environment does not meet the prerequisite, FW could not work
> correctly.
> Actually FW just reacts to the situations not it causes the issue.

Of course, I understand this. Just trying to figure this problem out..

> Please check it out!!

I'll report back with my findings with moving disk away from fans and
using anti-vibrations mounts.

Thanks for taking your time to reply.

Aron

> Thank you,
>
>
> -----Original Message-----
> From: Aron Stansvik [mailto:elvstone@gmail.com]
> Sent: Sunday, February 24, 2008 1:54 AM
> To: nick.cheng@areca.com.tw
> Cc: erich; akpm@linux-foundation.org; linux-scsi@vger.kernel.org;
> linux-kernel@vger.kernel.org
>
> Subject: Re: Aborted commands with arcmsr and 2xWD1500ADFD in RAID1
>
> Hello again Areca and LKML hackers.
>
> 2008/2/18, Aron Stansvik <elvstone@gmail.com>:
> > Hello Nick.
> >
> > Sorry that I'm not answering until now. I've been busy.
> >
> > 2008/2/13, nickcheng <nick.cheng@areca.com.tw>:
> >
> > > Hi Aron,
> > > From our experience and some customers' feedback, your issue could
be
> caused
> > > by power instability or vibration to your HDs.
> > > Please check step by step:
> > > (1).under your original environment, increase the SCSI command
value,
> > > default=30, with the shell script, set_scsicmd_timeout(). 90 or 120
is
> > > enough.
> > > (2).if method 1 does not work, find out the vibration source or
change
> the
> > > power supply
> >
> >
> > I will try to increase that value. I don't think it's vibration; the
> > disks are firmly in place in a very heavy chassi (Silverstone
> > SST-TJ05B-T). And I really don't think there's something wrong with
> > the power supply, it's a pretty new Silverstone ST65ZF 650W. This is
> > my own personal workstation, so I don't just have another power supply
> > to test with :/
> >
> > I will report back on my success/failure. Thanks for your answer.
>
> I've now tried with both 90 and 120 for the timeout value, and the
> problem still persists. It seems to happen when lots of small writes
> are occuring, e.g. when installing something.
>
> I really don't think the disks are vibrating, I don't see how they
> could. One more thing I'm going to test is to use the legacy ATA power
> connector instead of the SATA power connector. This was what I was
> using before when I only had a single drive and no RAID controller.
> Maybe my power supply is malfunctioning and not giving enough power on
> the SATA power connectors.. but I doubt it.
>
> Is there anything else that could cause this? Have you guys at Areca
> tested the ARC-1200 with Raptors in RAID1?
>
> :(
>
> Regards,
> Aron
>
> >
> >
> > Aron
> >
> >
> > > If your still have any questions, please feel free to let me know.
> > >
> > > P.S. The attached driver source, arcmsr-1.20.00.15-71224, has been
> > > upstreamed to kernel.org and will be released in kernel 2.6.25. If
you
> like,
> > > you could update your driver with it.
> > > It fixes some minor bugs, but these bugs are nothing to do with
your
> issue.
> > >
> > >
> > > -----Original Message-----
> > > From: erich [mailto:erich@areca.com.tw]
> > > Sent: Wednesday, February 13, 2008 4:33 PM
> > > To: (廣安科技)鄭守謙
> > > Subject: Fw: Aborted commands with arcmsr and 2xWD1500ADFD in RAID1
> > >
> > >
> > >
> > > ----- Original Message -----
> > > From: "Andrew Morton" <akpm@linux-foundation.org>
> > > To: "Aron Stansvik" <elvstone@gmail.com>
> > > Cc: <linux-kernel@vger.kernel.org>; <linux-scsi@vger.kernel.org>;
> "erich"
> > > <erich@areca.com.tw>
> > > Sent: Wednesday, February 13, 2008 4:03 PM
> > > Subject: Re: Aborted commands with arcmsr and 2xWD1500ADFD in RAID1
> > >
> > >
> > > >
> > > > (cc's added)
> > > >
> > > > On Mon, 11 Feb 2008 17:44:08 +0100 "Aron Stansvik"
> <elvstone@gmail.com>
> > > > wrote:
> > > >
> > > >> Hello LKML.
> > > >>
> > > >> Under semi-high disk I/O (e.g. installing a compiled KDE), I get
> the
> > > >> following (accompanied by seconds of lock-ups on the machine):
> > > >>
> > > >> [ 7727.345183] arcmsr0: abort device command of scsi id = 0 lun
= 0
> > > >> [ 7730.348776] arcmsr0: scsi id = 0 lun = 0 ccb
=
> > > >> '0xdfb461c0' poll command abort successfully
> > > >> [ 8053.795943] arcmsr0: abort device command of scsi id = 0 lun
= 0
> > > >> [ 8056.799528] arcmsr0: scsi id = 0 lun = 0 ccb
=
> > > >> '0xdfb595e0' poll command abort successfully
> > > >> [ 8884.592810] arcmsr0: abort device command of scsi id = 0 lun
= 0
> > > >> [ 8887.596392] arcmsr0: scsi id = 0 lun = 0 ccb
=
> > > >> '0xdfb56d80' poll command abort successfully
> > > >> [ 8917.760216] arcmsr0: abort device command of scsi id = 0 lun
= 0
> > > >> [ 8920.763797] arcmsr0: scsi id = 0 lun = 0 ccb
=
> > > >> '0xdfb472c0' poll command abort successfully
> > > >> [ 9074.106547] arcmsr0: abort device command of scsi id = 0 lun
= 0
> > > >>
> > > >> This is my setup:
> > > >>
> > > >> 1 x MSI K8N Master2-FAR
> > > >> 1 x Opteron 252
> > > >> 1 x Areca ARC1200 (sitting in a PCIe x4 socket)
> > > >> 2 x WD1500ADFD in RAID1
> > > >>
> > > >> astan@rubik:~$ uname -a
> > > >> Linux rubik 2.6.24-7-generic #1 SMP Thu Feb 7 01:29:58 UTC 2008
> i686
> > > >> GNU/Linux
> > > >> astan@rubik:~$ modinfo arcmsr
> > > >> filename:
> > > >> /lib/modules/2.6.24-7-generic/kernel/drivers/scsi/arcmsr/arcmsr.
ko
> > > >> version: Driver Version 1.20.00.15 2007/08/30
> > > >> license: Dual BSD/GPL
> > > >> description: ARECA (ARC11xx/12xx/13xx/16xx) SATA/SAS RAID
HOST
> Adapter
> > > >> author: Erich Chen <support@areca.com.tw>
> > > >> srcversion: 28EAD6AB49D4491CA04D465
> > > >> [...]
> > > >>
> > > >> I've read some previous posts here on LKML that it could be the
> Areca
> > > >> firmware who doesn't like my WD disks. Anyone know if this is an
> IRQ
> > > >> handling problem in the kernel, or if it's a problem with the
RAID
> > > >> controller firmware?
> > > >>
> > > >> Erich Chen (of Areca); have you tried the new ARC1200 in RAID1
> > > >> configuration with Raptor disks on Linux?
> > > >>
> > > >> As a side note, I can tell you that I first tried running
FreeBSD
> 6.3
> > > >> (RELENG_6) on this machine, but got random reboots during disk
I/O
> > > >> (even with a kernel with KDB debugging turned on). This leads me
to
> > > >> believe that it might be a firmware issue, and that Linux just
> handles
> > > >> it more gracefully than FreeBSD.
> > > >>
> > > >> Any ideas or advice is appriciated. This is my first post to the
> LKML,
> > > >> so please instruct me if you want more information or if you
want
> me
> > > >> to take further debugging actions.
> > > >>
> > > >> Best regards,
> > > >> Aron Stansvik
> > > >
> > >
> > >
> >
>
>

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2008-02-26 03:23    [W:0.100 / U:4.224 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site