lkml.org 
[lkml]   [2004]   [Jul]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRE: DriveReady SeekComplete Error...
Date
From
<*>     Include IDE/ATA-2 DISK support  
[*] Use multi-mode by default

Have you tried recompiling the kernel and checking off the second option
show above?

CONFIG_IDEDISK_MULTI_MODE
If you get this error, try to say Y here:
hda: set_multmode: status=0x51 { DriveReady SeekComplete Error }
hda: set_multmode: error=0x04 { DriveStatusError }
If in doubt, say N.


-----Original Message-----
From: linux-kernel-owner@vger.kernel.org
[mailto:linux-kernel-owner@vger.kernel.org] On Behalf Of Dwayne Rightler
Sent: Tuesday, July 13, 2004 8:33 AM
To: linux-kernel@vger.kernel.org
Cc: Dhruv Matani
Subject: Re: DriveReady SeekComplete Error...

I have a similar problem with a Samsung hard drive. Model SV2044D. The
output of 'hdparm -i' below indicates it supports several multiword and
ultra DMA modes but if i run the drive in anything other than PIO mode
it
gets DMA timeouts and SeekComplete Errors. This has been on every
kernel I
can recall in the 2.4 and 2.6 series.

demigod:~# hdparm -i /dev/hda

/dev/hda:

Model=SAMSUNG SV2044D, FwRev=MM200-53, SerialNo=0228J1FN905733
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
RawCHS=16383/16/63, TrkSize=34902, SectSize=554, ECCbytes=4
BuffType=DualPortCache, BuffSize=472kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=39862368
IORDY=yes, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 *udma4
AdvancedPM=no WriteCache=enabled
Drive conforms to: ATA/ATAPI-4 T13 1153D revision 17: 1 2 3 4

* signifies the current active mode



----- Original Message -----
From: "Dhruv Matani" <dhruvbird@gmx.net>
To: <linux-kernel@vger.kernel.org>
Sent: Tuesday, July 13, 2004 7:30 AM
Subject: DriveReady SeekComplete Error...


> Hi,
> I've been getting this error for my brand new (2 months old) Samsung
> HDD. The model Number is: SV0411N, and it is a 40GB disk. I'm using
the
> kernel version 2.4.20-8 provided by RedHat. When I used RH-7.2(before
> upgrading to RH-9), the same HDD worked fine. Also, when I
re-installed
> RH-7.2, it worked fine?
>
> Any suggestions?
>
> Please cc me the reply, sine I'm not subscribed.
> Thanks ;-)
>
> --
> -Dhruv Matani.
> http://www.geocities.com/dhruvbird/
>
> As a rule, man is a fool. When it's hot, he wants it cold.
> When it's cold he wants it hot. He always wants what is not.
> -Anon.
>
>
> -
> To unsubscribe from this list: send the line "unsubscribe
linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel"
in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 14:04    [W:0.724 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site