Messages in this thread | | | From | "Dwayne Rightler" <> | Subject | Re: DriveReady SeekComplete Error... | Date | Tue, 13 Jul 2004 10:57:36 -0500 |
| |
The CONFIG_IDEDISK_MULTI_MODE setting makes no difference as seen below:
demigod:~# uname -a Linux demigod 2.6.7-kexec #2 Tue Jul 13 08:31:56 CDT 2004 i686 GNU/Linux
demigod:~# zgrep CONFIG_IDEDISK_MULTI_MODE /proc/config.gz CONFIG_IDEDISK_MULTI_MODE=y
demigod:~# dmesg | grep ^hda hda: SAMSUNG SV2044D, ATA DISK drive hda: max request size: 128KiB hda: 39862368 sectors (20409 MB) w/472KiB Cache, CHS=39546/16/63 hda: DMA disabled hda: dma_timer_expiry: dma status == 0x61 hda: DMA timeout error hda: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest } hda: dma_timer_expiry: dma status == 0x61 hda: DMA timeout error hda: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest } hda: dma_timer_expiry: dma status == 0x61 hda: DMA timeout error hda: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest } hda: DMA disabled
##########################################
demigod:~# uname -a Linux demigod 2.6.7-kexec #1 Mon Jul 5 11:30:36 CDT 2004 i686 GNU/Linux
demigod:~# zgrep CONFIG_IDEDISK_MULTI_MODE /proc/config.gz # CONFIG_IDEDISK_MULTI_MODE is not set
demigod:~# dmesg | grep ^hda hda: SAMSUNG SV2044D, ATA DISK drive hda: max request size: 128KiB hda: 39862368 sectors (20409 MB) w/472KiB Cache, CHS=39546/16/63 hda: DMA disabled hda: dma_timer_expiry: dma status == 0x61 hda: DMA timeout error hda: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest } hda: dma_timer_expiry: dma status == 0x61 hda: DMA timeout error hda: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest } hda: DMA disabled hda: dma_timer_expiry: dma status == 0x41 hda: DMA timeout error hda: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest } hda: dma_timer_expiry: dma status == 0x61 hda: DMA timeout error hda: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest } ----- Original Message ----- From: "Piszcz, Justin Michael" <justin.piszcz@mitretek.org> To: "Dwayne Rightler" <drightler@technicalogic.com>; <linux-kernel@vger.kernel.org> Cc: "Dhruv Matani" <dhruvbird@gmx.net> Sent: Tuesday, July 13, 2004 7:44 AM Subject: RE: DriveReady SeekComplete Error...
> <*> Include IDE/ATA-2 DISK support > [*] Use multi-mode by default > > Have you tried recompiling the kernel and checking off the second option > show above? > > CONFIG_IDEDISK_MULTI_MODE > If you get this error, try to say Y here: > hda: set_multmode: status=0x51 { DriveReady SeekComplete Error } > hda: set_multmode: error=0x04 { DriveStatusError } > If in doubt, say N. > > > -----Original Message----- > From: linux-kernel-owner@vger.kernel.org > [mailto:linux-kernel-owner@vger.kernel.org] On Behalf Of Dwayne Rightler > Sent: Tuesday, July 13, 2004 8:33 AM > To: linux-kernel@vger.kernel.org > Cc: Dhruv Matani > Subject: Re: DriveReady SeekComplete Error... > > I have a similar problem with a Samsung hard drive. Model SV2044D. The > output of 'hdparm -i' below indicates it supports several multiword and > ultra DMA modes but if i run the drive in anything other than PIO mode > it > gets DMA timeouts and SeekComplete Errors. This has been on every > kernel I > can recall in the 2.4 and 2.6 series. > > demigod:~# hdparm -i /dev/hda > > /dev/hda: > > Model=SAMSUNG SV2044D, FwRev=MM200-53, SerialNo=0228J1FN905733 > Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs } > RawCHS=16383/16/63, TrkSize=34902, SectSize=554, ECCbytes=4 > BuffType=DualPortCache, BuffSize=472kB, MaxMultSect=16, MultSect=16 > CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=39862368 > IORDY=yes, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120} > PIO modes: pio0 pio1 pio2 pio3 pio4 > DMA modes: mdma0 mdma1 mdma2 > UDMA modes: udma0 udma1 udma2 udma3 *udma4 > AdvancedPM=no WriteCache=enabled > Drive conforms to: ATA/ATAPI-4 T13 1153D revision 17: 1 2 3 4 > > * signifies the current active mode > > > > ----- Original Message ----- > From: "Dhruv Matani" <dhruvbird@gmx.net> > To: <linux-kernel@vger.kernel.org> > Sent: Tuesday, July 13, 2004 7:30 AM > Subject: DriveReady SeekComplete Error... > > > > Hi, > > I've been getting this error for my brand new (2 months old) Samsung > > HDD. The model Number is: SV0411N, and it is a 40GB disk. I'm using > the > > kernel version 2.4.20-8 provided by RedHat. When I used RH-7.2(before > > upgrading to RH-9), the same HDD worked fine. Also, when I > re-installed > > RH-7.2, it worked fine? > > > > Any suggestions? > > > > Please cc me the reply, sine I'm not subscribed. > > Thanks ;-) > > > > -- > > -Dhruv Matani. > > http://www.geocities.com/dhruvbird/ > > > > As a rule, man is a fool. When it's hot, he wants it cold. > > When it's cold he wants it hot. He always wants what is not. > > -Anon. > > > > > > - > > To unsubscribe from this list: send the line "unsubscribe > linux-kernel" in > > the body of a message to majordomo@vger.kernel.org > > More majordomo info at http://vger.kernel.org/majordomo-info.html > > Please read the FAQ at http://www.tux.org/lkml/ > > > > - > To unsubscribe from this list: send the line "unsubscribe linux-kernel" > in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ > - > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ >
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |