Messages in this thread | | | Date | Sun, 05 Dec 2004 17:46:02 +0100 | From | Zoltan Boszormenyi <> | Subject | Re: CD-ROM problem on x86-64 |
| |
Andrew Morton írta: > Zoltan Boszormenyi <zboszor@freemail.hu> wrote: > >>Hi, >> >>I get sometimes these kind of errors reading continously from CDs: >> >>Nov 26 13:38:09 wl-193 kernel: hda: dma_timer_expiry: dma status == 0x24 >>Nov 26 13:38:19 wl-193 kernel: hda: DMA interrupt recovery >>Nov 26 13:38:19 wl-193 kernel: hda: lost interrupt >> >>and >> >>Nov 26 16:16:50 wl-193 kernel: hdc: DMA interrupt recovery >>Nov 26 16:16:50 wl-193 kernel: hdc: lost interrupt >> >>This happens when I use Xine playing AVIs from CDs. >>When it happens, it happens frequently, like once in every 5-10 minutes. >>When I play an SVCD then it's less frequent than on data CDs, >>like once in 30 minutes. >> >>Drive is: >> >>hdc: LITE-ON COMBO LTC-48161H, ATAPI CD/DVD-ROM drive >> >>I haven't seen these kind of errors on my previous FC1/i386 system with >>2.6.x kernels, I installed FC3/x86-64 recently. The original and the >>second errata kernel both show this errors. >> >>I also don't get this error on my harddisk. > > > Could we see the full boot log please? (ie: the dmesg output)
Finally, I got a little time to try other kernels than the official Fedora erratas. I compiled 2.6.10-rc3, applied the time-sliced-cfq-#2 io scheduler patch from Jens Axboe and updated the linuxconsole.sf.net multiconsole patch to work with 2.6.10-rc3, I depend on this functionality on my machine, my wife works on the machine or our children watch some cartoon or play games, etc, while I hack... :-)
I attached the full boot log for both kernel-2.6.9-1.681 (also customized with the multiconsole patch) and 2.6.10-rc3. The uptime is now more than 2 hours with the new kernel, so far I haven't experienced similar problem with it. I played an AVI off the harddisk and recompiled the xorg-x11 src.rpm at the same time to create I/O stress. No problem with /dev/hda.
What I miss are my removable devices. How to convince HAL daemon to keep /media/floppy and /media/cdrecorder? Or which patches should I apply from the Fedora kernel src.rpm? I created /mnt/cdrom and tried mounting /dev/hdc there (as root) but the mount hung... The kernel-2.6.9-1.681 Fedora kernel is basically 2.6.9-ac10, is there something in there what is not in 2.6.10-rc3 and a relevant fix to this? I am still on FC3/x86-64...
Best regards, Zoltán Böszörményi Bootdata ok (command line is ro root=LABEL=/ dumbcon=1 rhgb acpi=off quiet) Linux version 2.6.9-1.681ruby_FC3.root (root@wl-193.226.227-37-szolnok.dunaweb.hu) (gcc version 3.4.2 20041017 (Red Hat 3.4.2-6.fc3)) #1 Wed Nov 24 20:26:05 CET 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000cc000 - 00000000000d6000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data) BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) No mptable found. On node 0 totalpages: 131056 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 126960 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: VIA <6>Product ID: K8T400 <6>APIC at: 0xFEE00000 Processor #0 15:4 APIC version 17 I/O APIC #2 Version 3 at 0xFEC00000. Processors: 1 Checking aperture... CPU 0: aperture @ d0000000 size 128 MB Built 1 zonelists Kernel command line: ro root=LABEL=/ dumbcon=1 rhgb acpi=off quiet console=tty0 Initializing CPU#0 PID hash table entries: 2048 (order: 11, 65536 bytes) time.c: Using 1.193182 MHz PIT timer. time.c: Detected 2000.107 MHz processor. Console: Colour VGA+ 80x25 vc:1-16 Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Memory: 509312k/524224k available (2408k kernel code, 14156k reserved, 1292k data, 164k init) Calibrating delay loop... 3940.35 BogoMIPS (lpj=1970176) Security Scaffold v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode There is already a security framework initialized, register_security failed. selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 256 (order: 0, 4096 bytes) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU: AMD Athlon(tm) 64 Processor 3200+ stepping 08 Using local APIC NMI watchdog using perfctr0 Using IO-APIC 2 Using local APIC timer interrupts. Detected 12.500 MHz APIC timer. checking if image is initramfs... it is NET: Registered protocol family 16 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040816 ACPI: Interpreter disabled. usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Using IRQ router default [1106/3227] at 0000:00:11.0 PCI->APIC IRQ transform: (B0,I5,P0) -> 137 PCI->APIC IRQ transform: (B0,I5,P0) -> 137 PCI->APIC IRQ transform: (B0,I6,P0) -> 145 PCI->APIC IRQ transform: (B0,I8,P0) -> 153 PCI->APIC IRQ transform: (B0,I10,P0) -> 145 PCI->APIC IRQ transform: (B0,I11,P0) -> 137 PCI->APIC IRQ transform: (B0,I13,P0) -> 145 PCI->APIC IRQ transform: (B0,I14,P0) -> 153 PCI->APIC IRQ transform: (B0,I15,P1) -> 145 PCI->APIC IRQ transform: (B0,I15,P0) -> 145 PCI->APIC IRQ transform: (B0,I16,P0) -> 161 PCI->APIC IRQ transform: (B0,I16,P0) -> 161 PCI->APIC IRQ transform: (B0,I16,P1) -> 161 PCI->APIC IRQ transform: (B0,I16,P1) -> 161 PCI->APIC IRQ transform: (B0,I16,P2) -> 161 PCI->APIC IRQ transform: (B0,I17,P2) -> 169 PCI->APIC IRQ transform: (B1,I0,P0) -> 137 agpgart: Detected AGP bridge 0 agpgart: Maximum main memory to use for agp memory: 439M agpgart: AGP aperture is 128M @ 0xd0000000 PCI-DMA: Disabling IOMMU. IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ audit: initializing netlink socket (disabled) audit(1102064796.169:0): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key A617AC2237592777 - User ID: Red Hat, Inc. (Kernel Module GPG key) PCI: Via IRQ fixup for 0000:00:10.0, from 11 to 1 PCI: Via IRQ fixup for 0000:00:10.1, from 11 to 1 PCI: Via IRQ fixup for 0000:00:10.2, from 10 to 1 PCI: Via IRQ fixup for 0000:00:10.3, from 10 to 1 PCI: Via IRQ fixup for 0000:00:11.5, from 3 to 9 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 vesafb: probe of vesafb0 failed with error -6 Console: mono dummy device 80x25 vc:17-17 Real Time Clock Driver v1.12 Linux agpgart interface v0.100 (c) Dave Jones serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize divert: not allocating divert_blk for non-ethernet device lo Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:0f.1 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1 ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: Maxtor 6Y120L0, ATA DISK drive Using cfq io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: LITE-ON COMBO LTC-48161H, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 Probing IDE interface ide2... ide2: Wait for ready failed before probe ! Probing IDE interface ide3... ide3: Wait for ready failed before probe ! Probing IDE interface ide4... ide4: Wait for ready failed before probe ! Probing IDE interface ide5... ide5: Wait for ready failed before probe ! hda: max request size: 128KiB hda: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(133) hda: cache flushes supported hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 > hdc: ATAPI 48X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice keyboard.c: [AT Raw Set 2 keyboard] vc:1-16 input: AT Raw Set 2 keyboard on isa0060/serio1 keyboard.c: [AT Translated Set 2 keyboard] vc:17-17 input: AT Translated Set 2 keyboard on isa0060/serio0 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP: routing cache hash table of 512 buckets, 28Kbytes TCP: Hash tables configured (established 32768 bind 4681) Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.00.09b) powernow-k8: BIOS error - no PSB Freeing unused kernel memory: 164k freed SCSI subsystem initialized libata version 1.02 loaded. sata_via version 0.20 sata_via(0000:00:0f.0): routed to hard irq line 1 ata1: SATA max UDMA/133 cmd 0xD400 ctl 0xD002 bmdma 0xC400 irq 145 ata2: SATA max UDMA/133 cmd 0xCC00 ctl 0xC802 bmdma 0xC408 irq 145 ata1: no device found (phy stat 00000000) scsi0 : sata_via ata2: no device found (phy stat 00000000) scsi1 : sata_via sata_promise version 1.00 ata3: SATA max UDMA/133 cmd 0xFFFFFF0000054200 ctl 0xFFFFFF0000054238 bmdma 0x0 irq 145 ata4: SATA max UDMA/133 cmd 0xFFFFFF0000054280 ctl 0xFFFFFF00000542B8 bmdma 0x0 irq 145 ata3: no device found (phy stat 00000000) scsi2 : sata_promise ata4: no device found (phy stat 00000000) scsi3 : sata_promise kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. security: 3 users, 4 roles, 305 types, 19 bools security: 53 classes, 6688 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev hda10, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), not configured for labeling SELinux: initialized (dev hugetlbfs, type hugetlbfs), not configured for labeling SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev eventpollfs, type eventpollfs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts inserting floppy driver for 2.6.9-1.681ruby_FC3.root Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 orinoco 0.13e (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al) orinoco_pci 0.13e (Pavel Roskin <proski@gnu.org>, David Gibson <hermes@gibson.dropbear.id.au> & Jean Tourrilhes <jt@hpl.hp.com>) orinoco_pci: Detected Orinoco/Prism2 PCI device at 0000:00:08.0, mem:0xCFBFD000 to 0xCFBFDFFF -> 0xffffff0000056000, irq:153 Reset done..............................................................................................................................................................................................................................................................; Clear Reset............................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................; pci_cor : reg = 0x0 - FFFB9C12 - FFFB9A1E divert: allocating divert_blk for eth0 eth0: Station identity 001f:0006:0001:0003 eth0: Looks like an Intersil firmware version 1.3.6 eth0: Ad-hoc demo mode supported eth0: IEEE standard IBSS ad-hoc mode supported eth0: WEP supported, 104-bit key eth0: MAC address 00:09:5B:91:B2:E4 eth0: Station name "Prism I" eth0: ready r8169 Gigabit Ethernet driver 1.2 loaded r8169: NAPI enabled divert: allocating divert_blk for eth1 eth1: Identified chip type is 'RTL8169s/8110s'. eth1: RTL8169 at 0xffffff0000058f00, 00:0c:76:52:dc:54, IRQ 137 via82xx: Assuming DXS channels with 48k fixed sample rate. Please try dxs_support=1 or dxs_support=4 option and report if it works on your machine. PCI: Setting latency timer of device 0000:00:11.5 to 64 ehci_hcd 0000:00:10.4: EHCI Host Controller ehci_hcd 0000:00:10.4: irq 161, pci mem ffffff0000156d00 SELinux: initialized (dev usbdevfs, type usbdevfs), uses genfs_contexts ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:10.4: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected USB Universal Host Controller Interface driver v2.2 uhci_hcd 0000:00:10.0: UHCI Host Controller uhci_hcd 0000:00:10.0: irq 161, io base 000000000000b000 uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:10.1: UHCI Host Controller uhci_hcd 0000:00:10.1: irq 161, io base 000000000000b400 uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:10.2: UHCI Host Controller uhci_hcd 0000:00:10.2: irq 161, io base 000000000000b800 uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:10.3: UHCI Host Controller uhci_hcd 0000:00:10.3: irq 161, io base 000000000000bc00 uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org> ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[153] MMIO=[cffee000-cffee7ff] Max Packet=[2048] md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. usb 3-1: new low speed USB device using address 2 input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:10.1-1 usb 3-2: new low speed USB device using address 3 ieee1394: Host added: ID:BUS[0-00:1023] GUID[0010dc00002c4af2] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:10.1-2 usb 5-2: new full speed USB device using address 2 EXT3 FS on hda10, internal journal device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com kjournald starting. Commit interval 5 seconds EXT3 FS on hda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev hda1, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled SGI XFS Quota Management subsystem XFS mounting filesystem hda2 Ending clean XFS mount for filesystem: hda2 SELinux: initialized (dev hda2, type xfs), uses xattr XFS mounting filesystem hda5 Ending clean XFS mount for filesystem: hda5 SELinux: initialized (dev hda5, type xfs), uses xattr XFS mounting filesystem hda7 Ending clean XFS mount for filesystem: hda7 SELinux: initialized (dev hda7, type xfs), uses xattr XFS mounting filesystem hda11 Ending clean XFS mount for filesystem: hda11 SELinux: initialized (dev hda11, type xfs), uses xattr XFS mounting filesystem hda6 Ending clean XFS mount for filesystem: hda6 SELinux: initialized (dev hda6, type xfs), uses xattr XFS mounting filesystem hda9 Ending clean XFS mount for filesystem: hda9 SELinux: initialized (dev hda9, type xfs), uses xattr XFS mounting filesystem hda8 Ending clean XFS mount for filesystem: hda8 SELinux: initialized (dev hda8, type xfs), uses xattr SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts NET: Registered protocol family 10 Disabled Privacy Extensions on device ffffffff80452a20(lo) IPv6 over IPv4 tunneling driver divert: not allocating divert_blk for non-ethernet device sit0 Adding 522104k swap on /dev/hda3. Priority:-1 extents:1 SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP] parport0: irq 7 detected ip_tables: (C) 2000-2002 Netfilter core team ip_conntrack version 2.1 (2047 buckets, 16376 max) - 496 bytes per conntrack Linux Kernel Card Services options: [pci] [cardbus] [pm] eth0: New link status: Connected (0001) eth0: no IPv6 routers present SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts i2c /dev entries driver parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP] parport0: irq 7 detected lp0: using parport0 (polling). lp0: console ready vmmon: module license 'unspecified' taints kernel. vmmon: no version for "sys_ioctl" found: kernel tainted. /dev/vmmon: Module vmmon: registered with major=10 minor=165 /dev/vmmon: Module vmmon: initialized /dev/vmnet: open called by PID 3421 (vmnet-bridge) /dev/vmnet: hub 0 does not exist, allocating memory. /dev/vmnet: port on hub 0 successfully opened bridge-eth1: peer interface eth1 not found, will wait for it to come up bridge-eth1: attached /dev/vmnet: open called by PID 3444 (vmnet-natd) /dev/vmnet: hub 8 does not exist, allocating memory. /dev/vmnet: port on hub 8 successfully opened /dev/vmnet: open called by PID 5557 (vmnet-netifup) /dev/vmnet: hub 1 does not exist, allocating memory. /dev/vmnet: port on hub 1 successfully opened divert: allocating divert_blk for vmnet1 /dev/vmnet: open called by PID 5558 (vmnet-netifup) /dev/vmnet: port on hub 8 successfully opened divert: allocating divert_blk for vmnet8 /dev/vmnet: open called by PID 6111 (vmnet-dhcpd) /dev/vmnet: port on hub 8 successfully opened /dev/vmnet: open called by PID 6122 (vmnet-dhcpd) /dev/vmnet: port on hub 1 successfully opened [drm] Initialized radeon 1.11.0 20020828 on minor 0: [drm] Initialized radeon 1.11.0 20020828 on minor 1: vmnet1: no IPv6 routers present vmnet8: no IPv6 routers present agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode agpgart: Putting AGP V3 device at 0000:01:00.0 into 4x mode [drm] Loading R200 Microcode eth0: New link status: Disconnected (0002) eth0: New link status: Connected (0001) eth0: New link status: Disconnected (0002) eth0: New link status: Connected (0001) eth0: New link status: Disconnected (0002) eth0: New link status: Connected (0001) cdrom: hdc: mrw address space DMA selected ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A SELinux: initialized (dev hdc, type iso9660), uses genfs_contexts /dev/vmnet: open called by PID 7278 (vmware-vmx) /dev/vmnet: port on hub 8 successfully opened /dev/vmmon: host clock rate change request 0 -> 19 /dev/vmmon: host clock rate change request 19 -> 0 vmmon: Had to deallocate locked 1280 pages from vm driver 0000010008e85c00 vmmon: Had to deallocate AWE 1430 pages from vm driver 0000010008e85c00 /dev/vmnet: open called by PID 7333 (vmware-vmx) /dev/vmnet: port on hub 8 successfully opened /dev/vmmon: host clock rate change request 0 -> 19 /dev/vmmon: host clock rate change request 19 -> 63 /dev/vmmon: host clock rate change request 63 -> 200 /dev/vmmon: host clock rate change request 200 -> 201 /dev/vmmon: host clock rate change request 201 -> 1001 /dev/vmmon: host clock rate change request 1001 -> 201 /dev/vmmon: host clock rate change request 201 -> 1001 /dev/vmmon: host clock rate change request 1001 -> 201 /dev/vmmon: host clock rate change request 201 -> 1001 /dev/vmmon: host clock rate change request 1001 -> 201 Losing some ticks... checking if CPU frequency changed. program eject is using a deprecated SCSI ioctl, please convert it to SG_IO program eject is using a deprecated SCSI ioctl, please convert it to SG_IO program eject is using a deprecated SCSI ioctl, please convert it to SG_IO program eject is using a deprecated SCSI ioctl, please convert it to SG_IO cdrom: hdc: mrw address space DMA selected ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A SELinux: initialized (dev hdc, type iso9660), uses genfs_contexts cdrom: hdc: mrw address space DMA selected cdrom: hdc: mrw address space DMA selected cdrom: hdc: mrw address space DMA selected ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A SELinux: initialized (dev hdc, type iso9660), uses genfs_contexts /dev/vmmon: host clock rate change request 201 -> 200 /dev/vmmon: host clock rate change request 200 -> 0 vmmon: Had to deallocate locked 29421 pages from vm driver 0000010001a67400 vmmon: Had to deallocate AWE 2729 pages from vm driver 0000010001a67400 application mozilla-bin uses obsolete OSS audio interface warning: many lost ticks. Your time source seems to be instable or some driver is hogging interupts rip __do_softirq+0x41/0xa2 hda: dma_timer_expiry: dma status == 0x24 hda: DMA interrupt recovery hda: lost interrupt hdc: lost interrupt hda: dma_timer_expiry: dma status == 0x24 hda: DMA interrupt recovery hda: lost interrupt hda: dma_timer_expiry: dma status == 0x24 hda: DMA interrupt recovery hda: lost interrupt hda: dma_timer_expiry: dma status == 0x24 hda: DMA interrupt recovery hda: lost interrupt hda: dma_timer_expiry: dma status == 0x24 hda: DMA interrupt recovery hda: lost interrupt hda: dma_timer_expiry: dma status == 0x24 hda: DMA interrupt recovery hda: lost interrupt hda: dma_timer_expiry: dma status == 0x24 hda: DMA interrupt recovery hda: lost interrupt hda: dma_timer_expiry: dma status == 0x24 hda: DMA interrupt recovery hda: lost interrupt hda: dma_timer_expiry: dma status == 0x24 hda: DMA interrupt recovery hda: lost interrupt hda: dma_timer_expiry: dma status == 0x24 hda: DMA interrupt recovery hda: lost interrupt hda: dma_timer_expiry: dma status == 0x24 hda: DMA interrupt recovery hda: lost interrupt hda: dma_timer_expiry: dma status == 0x24 hda: DMA interrupt recovery hda: lost interrupt hda: dma_timer_expiry: dma status == 0x24 hda: DMA interrupt recovery hda: lost interrupt hda: dma_timer_expiry: dma status == 0x24 hda: DMA interrupt recovery hda: lost interrupt hda: dma_timer_expiry: dma status == 0x24 hda: DMA interrupt recovery hda: lost interrupt hda: dma_timer_expiry: dma status == 0x24 hda: DMA interrupt recovery hda: lost interrupt hda: dma_timer_expiry: dma status == 0x24 hda: DMA interrupt recovery hda: lost interrupt hdc: lost interrupt java: page allocation failure. order:4, mode:0x50
Call Trace:<ffffffff80167d0a>{__alloc_pages+709} <ffffffff80167da4>{__get_free_pages+28} <ffffffff8016bbb2>{kmem_getpages+31} <ffffffff8016c3aa>{cache_alloc_refill+1083} <ffffffff8016beac>{__kmalloc+112} <ffffffffa022b255>{:xfs:kmem_alloc+93} <ffffffffa022b30f>{:xfs:kmem_realloc+27} <ffffffffa020ca2d>{:xfs:xfs_iext_realloc+228} <ffffffffa01e7d9e>{:xfs:xfs_bmap_insert_exlist+54} <ffffffffa01e9044>{:xfs:xfs_bmap_add_extent+1017} <ffffffffa02128cb>{:xfs:xlog_assign_tail_lsn+16} <ffffffffa022d6aa>{:xfs:pagebuf_rele+388} <ffffffffa01eff0d>{:xfs:xfs_bmbt_get_state+9} <ffffffffa01ea3ef>{:xfs:xfs_bmap_do_search_extents+693} <ffffffffa01ece2b>{:xfs:xfs_bmapi+5858} <ffffffffa01eff0d>{:xfs:xfs_bmbt_get_state+9} <ffffffffa01ebac2>{:xfs:xfs_bmapi+889} <ffffffff80122312>{dma_map_sg+622} <ffffffff802abf01>{ide_pci_register_driver+23} <ffffffffa021018f>{:xfs:xfs_iomap_write_delay+936} <ffffffffa020f85e>{:xfs:xfs_iomap+614} <ffffffffa022c480>{:xfs:linvfs_get_block_core+116} <ffffffff8018e9f5>{alloc_buffer_head+36} <ffffffffa022c5b6>{:xfs:linvfs_get_block+20} <ffffffff8018f97c>{__block_prepare_write+341} <ffffffffa022c5a2>{:xfs:linvfs_get_block+0} <ffffffff8018fbfb>{block_prepare_write+26} <ffffffff80164846>{generic_file_buffered_write+467} <ffffffff8016356c>{find_get_pages_tag+179} <ffffffff8016278f>{__filemap_fdatawrite_range+101} <ffffffff801ad670>{inode_update_time+147} <ffffffffa02330d7>{:xfs:xfs_write+1393} <ffffffff8018a8ab>{do_sync_write+0} <ffffffffa022f708>{:xfs:linvfs_writev+216} <ffffffff80135323>{autoremove_wake_function+0} <ffffffff801c2e75>{compat_do_readv_writev+447} <ffffffffa02320ca>{:xfs:linvfs_getattr+40} <ffffffff8012642e>{sys32_fstat64+32} <ffffffff8018a13a>{generic_file_llseek+46} <ffffffff801c2fdf>{compat_sys_writev+95} <ffffffff80125dc3>{cstar_do_call+27} java: page allocation failure. order:4, mode:0x50
Call Trace:<ffffffff80167d0a>{__alloc_pages+709} <ffffffff80167da4>{__get_free_pages+28} <ffffffff8016bbb2>{kmem_getpages+31} <ffffffff8016c3aa>{cache_alloc_refill+1083} <ffffffff8016beac>{__kmalloc+112} <ffffffffa022b255>{:xfs:kmem_alloc+93} <ffffffffa022b30f>{:xfs:kmem_realloc+27} <ffffffffa020ca2d>{:xfs:xfs_iext_realloc+228} <ffffffffa01e7d9e>{:xfs:xfs_bmap_insert_exlist+54} <ffffffffa01e9044>{:xfs:xfs_bmap_add_extent+1017} <ffffffffa02128cb>{:xfs:xlog_assign_tail_lsn+16} <ffffffffa022d6aa>{:xfs:pagebuf_rele+388} <ffffffffa01eff0d>{:xfs:xfs_bmbt_get_state+9} <ffffffffa01ea3ef>{:xfs:xfs_bmap_do_search_extents+693} <ffffffffa01ece2b>{:xfs:xfs_bmapi+5858} <ffffffffa01eff0d>{:xfs:xfs_bmbt_get_state+9} <ffffffffa01ebac2>{:xfs:xfs_bmapi+889} <ffffffff80122312>{dma_map_sg+622} <ffffffff802abf01>{ide_pci_register_driver+23} <ffffffffa021018f>{:xfs:xfs_iomap_write_delay+936} <ffffffffa020f85e>{:xfs:xfs_iomap+614} <ffffffffa022c480>{:xfs:linvfs_get_block_core+116} <ffffffff8018e9f5>{alloc_buffer_head+36} <ffffffffa022c5b6>{:xfs:linvfs_get_block+20} <ffffffff8018f97c>{__block_prepare_write+341} <ffffffffa022c5a2>{:xfs:linvfs_get_block+0} <ffffffff8018fbfb>{block_prepare_write+26} <ffffffff80164846>{generic_file_buffered_write+467} <ffffffff8016356c>{find_get_pages_tag+179} <ffffffff8016278f>{__filemap_fdatawrite_range+101} <ffffffff801ad670>{inode_update_time+147} <ffffffffa02330d7>{:xfs:xfs_write+1393} <ffffffff8018a8ab>{do_sync_write+0} <ffffffffa022f708>{:xfs:linvfs_writev+216} <ffffffff80135323>{autoremove_wake_function+0} <ffffffff801c2e75>{compat_do_readv_writev+447} <ffffffffa02320ca>{:xfs:linvfs_getattr+40} <ffffffff8012642e>{sys32_fstat64+32} <ffffffff8018a13a>{generic_file_llseek+46} <ffffffff801c2fdf>{compat_sys_writev+95} <ffffffff80125dc3>{cstar_do_call+27} java: page allocation failure. order:4, mode:0x50
Call Trace:<ffffffff80167d0a>{__alloc_pages+709} <ffffffff80167da4>{__get_free_pages+28} <ffffffff8016bbb2>{kmem_getpages+31} <ffffffff8016c3aa>{cache_alloc_refill+1083} <ffffffff8016beac>{__kmalloc+112} <ffffffffa022b255>{:xfs:kmem_alloc+93} <ffffffffa022b30f>{:xfs:kmem_realloc+27} <ffffffffa020ca2d>{:xfs:xfs_iext_realloc+228} <ffffffffa01e7d9e>{:xfs:xfs_bmap_insert_exlist+54} <ffffffffa01e9044>{:xfs:xfs_bmap_add_extent+1017} <ffffffffa02128cb>{:xfs:xlog_assign_tail_lsn+16} <ffffffffa022d6aa>{:xfs:pagebuf_rele+388} <ffffffffa01eff0d>{:xfs:xfs_bmbt_get_state+9} <ffffffffa01ea3ef>{:xfs:xfs_bmap_do_search_extents+693} <ffffffffa01ece2b>{:xfs:xfs_bmapi+5858} <ffffffffa01eff0d>{:xfs:xfs_bmbt_get_state+9} <ffffffffa01ebac2>{:xfs:xfs_bmapi+889} <ffffffff80122312>{dma_map_sg+622} <ffffffff802abf01>{ide_pci_register_driver+23} <ffffffffa021018f>{:xfs:xfs_iomap_write_delay+936} <ffffffffa020f85e>{:xfs:xfs_iomap+614} <ffffffffa022c480>{:xfs:linvfs_get_block_core+116} <ffffffff8018e9f5>{alloc_buffer_head+36} <ffffffffa022c5b6>{:xfs:linvfs_get_block+20} <ffffffff8018f97c>{__block_prepare_write+341} <ffffffffa022c5a2>{:xfs:linvfs_get_block+0} <ffffffff8018fbfb>{block_prepare_write+26} <ffffffff80164846>{generic_file_buffered_write+467} <ffffffff8016356c>{find_get_pages_tag+179} <ffffffff8016278f>{__filemap_fdatawrite_range+101} <ffffffff801ad670>{inode_update_time+147} <ffffffffa02330d7>{:xfs:xfs_write+1393} <ffffffff8018a8ab>{do_sync_write+0} <ffffffffa022f708>{:xfs:linvfs_writev+216} <ffffffff80135323>{autoremove_wake_function+0} <ffffffff801c2e75>{compat_do_readv_writev+447} <ffffffffa02320ca>{:xfs:linvfs_getattr+40} <ffffffff8012642e>{sys32_fstat64+32} <ffffffff8018a13a>{generic_file_llseek+46} <ffffffff801c2fdf>{compat_sys_writev+95} <ffffffff80125dc3>{cstar_do_call+27} java: page allocation failure. order:4, mode:0x50
Call Trace:<ffffffff80167d0a>{__alloc_pages+709} <ffffffff80167da4>{__get_free_pages+28} <ffffffff8016bbb2>{kmem_getpages+31} <ffffffff8016c3aa>{cache_alloc_refill+1083} <ffffffff8016beac>{__kmalloc+112} <ffffffffa022b255>{:xfs:kmem_alloc+93} <ffffffffa022b30f>{:xfs:kmem_realloc+27} <ffffffffa020ca2d>{:xfs:xfs_iext_realloc+228} <ffffffffa01e7d9e>{:xfs:xfs_bmap_insert_exlist+54} <ffffffffa01e9044>{:xfs:xfs_bmap_add_extent+1017} <ffffffffa02128cb>{:xfs:xlog_assign_tail_lsn+16} <ffffffffa022d6aa>{:xfs:pagebuf_rele+388} <ffffffffa01eff0d>{:xfs:xfs_bmbt_get_state+9} <ffffffffa01ea3ef>{:xfs:xfs_bmap_do_search_extents+693} <ffffffffa01ece2b>{:xfs:xfs_bmapi+5858} <ffffffffa01eff0d>{:xfs:xfs_bmbt_get_state+9} <ffffffffa01ebac2>{:xfs:xfs_bmapi+889} <ffffffff80122312>{dma_map_sg+622} <ffffffff802abf01>{ide_pci_register_driver+23} <ffffffffa021018f>{:xfs:xfs_iomap_write_delay+936} <ffffffffa020f85e>{:xfs:xfs_iomap+614} <ffffffffa022c480>{:xfs:linvfs_get_block_core+116} <ffffffff8018e9f5>{alloc_buffer_head+36} <ffffffffa022c5b6>{:xfs:linvfs_get_block+20} <ffffffff8018f97c>{__block_prepare_write+341} <ffffffffa022c5a2>{:xfs:linvfs_get_block+0} <ffffffff8018fbfb>{block_prepare_write+26} <ffffffff80164846>{generic_file_buffered_write+467} <ffffffff8016356c>{find_get_pages_tag+179} <ffffffff8016278f>{__filemap_fdatawrite_range+101} <ffffffff801ad670>{inode_update_time+147} <ffffffffa02330d7>{:xfs:xfs_write+1393} <ffffffff8018a8ab>{do_sync_write+0} <ffffffffa022f708>{:xfs:linvfs_writev+216} <ffffffff80135323>{autoremove_wake_function+0} <ffffffff801c2e75>{compat_do_readv_writev+447} <ffffffffa02320ca>{:xfs:linvfs_getattr+40} <ffffffff8012642e>{sys32_fstat64+32} <ffffffff8018a13a>{generic_file_llseek+46} <ffffffff801c2fdf>{compat_sys_writev+95} <ffffffff80125dc3>{cstar_do_call+27} java: page allocation failure. order:4, mode:0x50
Call Trace:<ffffffff80167d0a>{__alloc_pages+709} <ffffffff80167da4>{__get_free_pages+28} <ffffffff8016bbb2>{kmem_getpages+31} <ffffffff8016c3aa>{cache_alloc_refill+1083} <ffffffff8016beac>{__kmalloc+112} <ffffffffa022b255>{:xfs:kmem_alloc+93} <ffffffffa022b30f>{:xfs:kmem_realloc+27} <ffffffffa020ca2d>{:xfs:xfs_iext_realloc+228} <ffffffffa01e7d9e>{:xfs:xfs_bmap_insert_exlist+54} <ffffffffa01e9044>{:xfs:xfs_bmap_add_extent+1017} <ffffffffa02128cb>{:xfs:xlog_assign_tail_lsn+16} <ffffffffa022d6aa>{:xfs:pagebuf_rele+388} <ffffffffa01eff0d>{:xfs:xfs_bmbt_get_state+9} <ffffffffa01ea3ef>{:xfs:xfs_bmap_do_search_extents+693} <ffffffffa01ece2b>{:xfs:xfs_bmapi+5858} <ffffffffa01eff0d>{:xfs:xfs_bmbt_get_state+9} <ffffffffa01ebac2>{:xfs:xfs_bmapi+889} <ffffffff80122312>{dma_map_sg+622} <ffffffff802abf01>{ide_pci_register_driver+23} <ffffffffa021018f>{:xfs:xfs_iomap_write_delay+936} <ffffffffa020f85e>{:xfs:xfs_iomap+614} <ffffffffa022c480>{:xfs:linvfs_get_block_core+116} <ffffffff8018e9f5>{alloc_buffer_head+36} <ffffffffa022c5b6>{:xfs:linvfs_get_block+20} <ffffffff8018f97c>{__block_prepare_write+341} <ffffffffa022c5a2>{:xfs:linvfs_get_block+0} <ffffffff8018fbfb>{block_prepare_write+26} <ffffffff80164846>{generic_file_buffered_write+467} <ffffffff8016356c>{find_get_pages_tag+179} <ffffffff8016278f>{__filemap_fdatawrite_range+101} <ffffffff801ad670>{inode_update_time+147} <ffffffffa02330d7>{:xfs:xfs_write+1393} <ffffffff8018a8ab>{do_sync_write+0} <ffffffffa022f708>{:xfs:linvfs_writev+216} <ffffffff80135323>{autoremove_wake_function+0} <ffffffff801c2e75>{compat_do_readv_writev+447} <ffffffffa02320ca>{:xfs:linvfs_getattr+40} <ffffffff8012642e>{sys32_fstat64+32} <ffffffff8018a13a>{generic_file_llseek+46} <ffffffff801c2fdf>{compat_sys_writev+95} <ffffffff80125dc3>{cstar_do_call+27} java: page allocation failure. order:4, mode:0x50
Call Trace:<ffffffff80167d0a>{__alloc_pages+709} <ffffffff80167da4>{__get_free_pages+28} <ffffffff8016bbb2>{kmem_getpages+31} <ffffffff8016c3aa>{cache_alloc_refill+1083} <ffffffff8016beac>{__kmalloc+112} <ffffffffa022b255>{:xfs:kmem_alloc+93} <ffffffffa022b30f>{:xfs:kmem_realloc+27} <ffffffffa020ca2d>{:xfs:xfs_iext_realloc+228} <ffffffffa01e7d9e>{:xfs:xfs_bmap_insert_exlist+54} <ffffffffa01e9044>{:xfs:xfs_bmap_add_extent+1017} <ffffffffa02128cb>{:xfs:xlog_assign_tail_lsn+16} <ffffffffa022d6aa>{:xfs:pagebuf_rele+388} <ffffffffa01eff0d>{:xfs:xfs_bmbt_get_state+9} <ffffffffa01ea3ef>{:xfs:xfs_bmap_do_search_extents+693} <ffffffffa01ece2b>{:xfs:xfs_bmapi+5858} <ffffffffa01eff0d>{:xfs:xfs_bmbt_get_state+9} <ffffffffa01ebac2>{:xfs:xfs_bmapi+889} <ffffffff80122312>{dma_map_sg+622} <ffffffff802abf01>{ide_pci_register_driver+23} <ffffffffa021018f>{:xfs:xfs_iomap_write_delay+936} <ffffffffa020f85e>{:xfs:xfs_iomap+614} <ffffffffa022c480>{:xfs:linvfs_get_block_core+116} <ffffffff8018e9f5>{alloc_buffer_head+36} <ffffffffa022c5b6>{:xfs:linvfs_get_block+20} <ffffffff8018f97c>{__block_prepare_write+341} <ffffffffa022c5a2>{:xfs:linvfs_get_block+0} <ffffffff8018fbfb>{block_prepare_write+26} <ffffffff80164846>{generic_file_buffered_write+467} <ffffffff8016356c>{find_get_pages_tag+179} <ffffffff8016278f>{__filemap_fdatawrite_range+101} <ffffffff801ad670>{inode_update_time+147} <ffffffffa02330d7>{:xfs:xfs_write+1393} <ffffffff8018a8ab>{do_sync_write+0} <ffffffffa022f708>{:xfs:linvfs_writev+216} <ffffffff80135323>{autoremove_wake_function+0} <ffffffff801c2e75>{compat_do_readv_writev+447} <ffffffffa02320ca>{:xfs:linvfs_getattr+40} <ffffffff8012642e>{sys32_fstat64+32} <ffffffff8018a13a>{generic_file_llseek+46} <ffffffff801c2fdf>{compat_sys_writev+95} <ffffffff80125dc3>{cstar_do_call+27} java: page allocation failure. order:4, mode:0x50
Call Trace:<ffffffff80167d0a>{__alloc_pages+709} <ffffffff80167da4>{__get_free_pages+28} <ffffffff8016bbb2>{kmem_getpages+31} <ffffffff8016c3aa>{cache_alloc_refill+1083} <ffffffff8016beac>{__kmalloc+112} <ffffffffa022b255>{:xfs:kmem_alloc+93} <ffffffffa022b30f>{:xfs:kmem_realloc+27} <ffffffffa020ca2d>{:xfs:xfs_iext_realloc+228} <ffffffffa01e7d9e>{:xfs:xfs_bmap_insert_exlist+54} <ffffffffa01e9044>{:xfs:xfs_bmap_add_extent+1017} <ffffffffa02128cb>{:xfs:xlog_assign_tail_lsn+16} <ffffffffa022d6aa>{:xfs:pagebuf_rele+388} <ffffffffa01eff0d>{:xfs:xfs_bmbt_get_state+9} <ffffffffa01ea3ef>{:xfs:xfs_bmap_do_search_extents+693} <ffffffffa01ece2b>{:xfs:xfs_bmapi+5858} <ffffffffa01eff0d>{:xfs:xfs_bmbt_get_state+9} <ffffffffa01ebac2>{:xfs:xfs_bmapi+889} <ffffffff80122312>{dma_map_sg+622} <ffffffff802abf01>{ide_pci_register_driver+23} <ffffffffa021018f>{:xfs:xfs_iomap_write_delay+936} <ffffffffa020f85e>{:xfs:xfs_iomap+614} <ffffffffa022c480>{:xfs:linvfs_get_block_core+116} <ffffffff8018e9f5>{alloc_buffer_head+36} <ffffffffa022c5b6>{:xfs:linvfs_get_block+20} <ffffffff8018f97c>{__block_prepare_write+341} <ffffffffa022c5a2>{:xfs:linvfs_get_block+0} <ffffffff8018fbfb>{block_prepare_write+26} <ffffffff80164846>{generic_file_buffered_write+467} <ffffffff8016356c>{find_get_pages_tag+179} <ffffffff8016278f>{__filemap_fdatawrite_range+101} <ffffffff801ad670>{inode_update_time+147} <ffffffffa02330d7>{:xfs:xfs_write+1393} <ffffffff8018a8ab>{do_sync_write+0} <ffffffffa022f708>{:xfs:linvfs_writev+216} <ffffffff80135323>{autoremove_wake_function+0} <ffffffff801c2e75>{compat_do_readv_writev+447} <ffffffffa02320ca>{:xfs:linvfs_getattr+40} <ffffffff8012642e>{sys32_fstat64+32} <ffffffff8018a13a>{generic_file_llseek+46} <ffffffff801c2fdf>{compat_sys_writev+95} <ffffffff80125dc3>{cstar_do_call+27} java: page allocation failure. order:4, mode:0x50
Call Trace:<ffffffff80167d0a>{__alloc_pages+709} <ffffffff80167da4>{__get_free_pages+28} <ffffffff8016bbb2>{kmem_getpages+31} <ffffffff8016c3aa>{cache_alloc_refill+1083} <ffffffff8016beac>{__kmalloc+112} <ffffffffa022b255>{:xfs:kmem_alloc+93} <ffffffffa022b30f>{:xfs:kmem_realloc+27} <ffffffffa020ca2d>{:xfs:xfs_iext_realloc+228} <ffffffffa01e7d9e>{:xfs:xfs_bmap_insert_exlist+54} <ffffffffa01e9044>{:xfs:xfs_bmap_add_extent+1017} <ffffffffa02128cb>{:xfs:xlog_assign_tail_lsn+16} <ffffffffa022d6aa>{:xfs:pagebuf_rele+388} <ffffffffa01eff0d>{:xfs:xfs_bmbt_get_state+9} <ffffffffa01ea3ef>{:xfs:xfs_bmap_do_search_extents+693} <ffffffffa01ece2b>{:xfs:xfs_bmapi+5858} <ffffffffa01eff0d>{:xfs:xfs_bmbt_get_state+9} <ffffffffa01ebac2>{:xfs:xfs_bmapi+889} <ffffffff80122312>{dma_map_sg+622} <ffffffff802abf01>{ide_pci_register_driver+23} <ffffffffa021018f>{:xfs:xfs_iomap_write_delay+936} <ffffffffa020f85e>{:xfs:xfs_iomap+614} <ffffffffa022c480>{:xfs:linvfs_get_block_core+116} <ffffffff8018e9f5>{alloc_buffer_head+36} <ffffffffa022c5b6>{:xfs:linvfs_get_block+20} <ffffffff8018f97c>{__block_prepare_write+341} <ffffffffa022c5a2>{:xfs:linvfs_get_block+0} <ffffffff8018fbfb>{block_prepare_write+26} <ffffffff80164846>{generic_file_buffered_write+467} <ffffffff8016356c>{find_get_pages_tag+179} <ffffffff8016278f>{__filemap_fdatawrite_range+101} <ffffffff801ad670>{inode_update_time+147} <ffffffffa02330d7>{:xfs:xfs_write+1393} <ffffffff8018a8ab>{do_sync_write+0} <ffffffffa022f708>{:xfs:linvfs_writev+216} <ffffffff80135323>{autoremove_wake_function+0} <ffffffff801c2e75>{compat_do_readv_writev+447} <ffffffffa02320ca>{:xfs:linvfs_getattr+40} <ffffffff8012642e>{sys32_fstat64+32} <ffffffff8018a13a>{generic_file_llseek+46} <ffffffff801c2fdf>{compat_sys_writev+95} <ffffffff80125dc3>{cstar_do_call+27} java: page allocation failure. order:4, mode:0x50
Call Trace:<ffffffff80167d0a>{__alloc_pages+709} <ffffffff80167da4>{__get_free_pages+28} <ffffffff8016bbb2>{kmem_getpages+31} <ffffffff8016c3aa>{cache_alloc_refill+1083} <ffffffff8016beac>{__kmalloc+112} <ffffffffa022b255>{:xfs:kmem_alloc+93} <ffffffffa022b30f>{:xfs:kmem_realloc+27} <ffffffffa020ca2d>{:xfs:xfs_iext_realloc+228} <ffffffffa01e7d9e>{:xfs:xfs_bmap_insert_exlist+54} <ffffffffa01e9044>{:xfs:xfs_bmap_add_extent+1017} <ffffffffa02128cb>{:xfs:xlog_assign_tail_lsn+16} <ffffffffa022d6aa>{:xfs:pagebuf_rele+388} <ffffffffa01eff0d>{:xfs:xfs_bmbt_get_state+9} <ffffffffa01ea3ef>{:xfs:xfs_bmap_do_search_extents+693} <ffffffffa01ece2b>{:xfs:xfs_bmapi+5858} <ffffffffa01eff0d>{:xfs:xfs_bmbt_get_state+9} <ffffffffa01ebac2>{:xfs:xfs_bmapi+889} <ffffffff80122312>{dma_map_sg+622} <ffffffff802abf01>{ide_pci_register_driver+23} <ffffffffa021018f>{:xfs:xfs_iomap_write_delay+936} <ffffffffa020f85e>{:xfs:xfs_iomap+614} <ffffffffa022c480>{:xfs:linvfs_get_block_core+116} <ffffffff8018e9f5>{alloc_buffer_head+36} <ffffffffa022c5b6>{:xfs:linvfs_get_block+20} <ffffffff8018f97c>{__block_prepare_write+341} <ffffffffa022c5a2>{:xfs:linvfs_get_block+0} <ffffffff8018fbfb>{block_prepare_write+26} <ffffffff80164846>{generic_file_buffered_write+467} <ffffffff8016356c>{find_get_pages_tag+179} <ffffffff8016278f>{__filemap_fdatawrite_range+101} <ffffffff801ad670>{inode_update_time+147} <ffffffffa02330d7>{:xfs:xfs_write+1393} <ffffffff8018a8ab>{do_sync_write+0} <ffffffffa022f708>{:xfs:linvfs_writev+216} <ffffffff80135323>{autoremove_wake_function+0} <ffffffff801c2e75>{compat_do_readv_writev+447} <ffffffffa02320ca>{:xfs:linvfs_getattr+40} <ffffffff8012642e>{sys32_fstat64+32} <ffffffff8018a13a>{generic_file_llseek+46} <ffffffff801c2fdf>{compat_sys_writev+95} <ffffffff80125dc3>{cstar_do_call+27} java: page allocation failure. order:4, mode:0x50
Call Trace:<ffffffff80167d0a>{__alloc_pages+709} <ffffffff80167da4>{__get_free_pages+28} <ffffffff8016bbb2>{kmem_getpages+31} <ffffffff8016c3aa>{cache_alloc_refill+1083} <ffffffff8016beac>{__kmalloc+112} <ffffffffa022b255>{:xfs:kmem_alloc+93} <ffffffffa022b30f>{:xfs:kmem_realloc+27} <ffffffffa020ca2d>{:xfs:xfs_iext_realloc+228} <ffffffffa01e7d9e>{:xfs:xfs_bmap_insert_exlist+54} <ffffffffa01e9044>{:xfs:xfs_bmap_add_extent+1017} <ffffffffa02128cb>{:xfs:xlog_assign_tail_lsn+16} <ffffffffa022d6aa>{:xfs:pagebuf_rele+388} <ffffffffa01eff0d>{:xfs:xfs_bmbt_get_state+9} <ffffffffa01ea3ef>{:xfs:xfs_bmap_do_search_extents+693} <ffffffffa01ece2b>{:xfs:xfs_bmapi+5858} <ffffffffa01eff0d>{:xfs:xfs_bmbt_get_state+9} <ffffffffa01ebac2>{:xfs:xfs_bmapi+889} <ffffffff80122312>{dma_map_sg+622} <ffffffff802abf01>{ide_pci_register_driver+23} <ffffffffa021018f>{:xfs:xfs_iomap_write_delay+936} <ffffffffa020f85e>{:xfs:xfs_iomap+614} <ffffffffa022c480>{:xfs:linvfs_get_block_core+116} <ffffffff8018e9f5>{alloc_buffer_head+36} <ffffffffa022c5b6>{:xfs:linvfs_get_block+20} <ffffffff8018f97c>{__block_prepare_write+341} <ffffffffa022c5a2>{:xfs:linvfs_get_block+0} <ffffffff8018fbfb>{block_prepare_write+26} <ffffffff80164846>{generic_file_buffered_write+467} <ffffffff8016356c>{find_get_pages_tag+179} <ffffffff8016278f>{__filemap_fdatawrite_range+101} <ffffffff801ad670>{inode_update_time+147} <ffffffffa02330d7>{:xfs:xfs_write+1393} <ffffffff8018a8ab>{do_sync_write+0} <ffffffffa022f708>{:xfs:linvfs_writev+216} <ffffffff80135323>{autoremove_wake_function+0} <ffffffff801c2e75>{compat_do_readv_writev+447} <ffffffffa02320ca>{:xfs:linvfs_getattr+40} <ffffffff8012642e>{sys32_fstat64+32} <ffffffff8018a13a>{generic_file_llseek+46} <ffffffff801c2fdf>{compat_sys_writev+95} <ffffffff80125dc3>{cstar_do_call+27} possible deadlock in kmem_alloc (mode:0x50) possible deadlock in kmem_alloc (mode:0x50) possible deadlock in kmem_alloc (mode:0x50) possible deadlock in kmem_alloc (mode:0x50) possible deadlock in kmem_alloc (mode:0x50) possible deadlock in kmem_alloc (mode:0x50) hdc: lost interrupt hdc: lost interrupt hdc: lost interrupt cdrom: hdc: mrw address space DMA selected cdrom: hdc: mrw address space DMA selected ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A SELinux: initialized (dev hdc, type iso9660), uses genfs_contexts ide-cd: cmd 0x28 timed out hdc: DMA interrupt recovery hdc: lost interrupt ide-cd: cmd 0x28 timed out hdc: DMA interrupt recovery hdc: lost interrupt ide-cd: cmd 0x28 timed out hdc: DMA interrupt recovery hdc: lost interrupt ide-cd: cmd 0x28 timed out hdc: DMA interrupt recovery hdc: lost interrupt hdc: lost interrupt hdc: lost interrupt hda: dma_timer_expiry: dma status == 0x24 hda: DMA interrupt recovery hda: lost interrupt hda: dma_timer_expiry: dma status == 0x24 hda: DMA interrupt recovery hda: lost interrupt hda: dma_timer_expiry: dma status == 0x24 hda: DMA interrupt recovery hda: lost interrupt hda: dma_timer_expiry: dma status == 0x24 hda: DMA interrupt recovery hda: lost interrupt hdc: lost interrupt eth0: New link status: Disconnected (0002) eth0: New link status: Association Failed (0006) eth0: New link status: Connected (0001) hdc: lost interrupt hda: dma_timer_expiry: dma status == 0x24 hda: DMA interrupt recovery hda: lost interrupt hda: dma_timer_expiry: dma status == 0x24 hda: DMA interrupt recovery hda: lost interrupt cdrom: hdc: mrw address space DMA selected cdrom: hdc: mrw address space DMA selected ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A SELinux: initialized (dev hdc, type iso9660), uses genfs_contexts hda: dma_timer_expiry: dma status == 0x24 hda: DMA interrupt recovery hda: lost interrupt ide-cd: cmd 0x28 timed out hdc: DMA interrupt recovery hdc: lost interrupt ide-cd: cmd 0x28 timed out hdc: DMA interrupt recovery hdc: lost interrupt Bootdata ok (command line is ro root=LABEL=/ dumbcon=1 single elevator=cfq) Linux version 2.6.10-rc3-ruby (zozo@wl-193.226.227-37-szolnok.dunaweb.hu) (gcc version 3.4.2 20041017 (Red Hat 3.4.2-6.fc3)) #2 Sun Dec 5 13:21:42 CET 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000cc000 - 00000000000d6000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data) BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) No mptable found. On node 0 totalpages: 131056 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 126960 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 ACPI: RSDP (v000 AMI ) @ 0x00000000000fa3f0 ACPI: RSDT (v001 AMIINT VIA_K8 0x00000010 MSFT 0x00000097) @ 0x000000001fff0000 ACPI: FADT (v001 AMIINT VIA_K8 0x00000011 MSFT 0x00000097) @ 0x000000001fff0030 ACPI: MADT (v001 AMIINT VIA_K8 0x00000009 MSFT 0x00000097) @ 0x000000001fff00c0 ACPI: DSDT (v001 VIA VIA_K8 0x00001000 MSFT 0x0100000d) @ 0x0000000000000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:4 APIC version 16 ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information Checking aperture... CPU 0: aperture @ d0000000 size 128 MB Built 1 zonelists Kernel command line: ro root=LABEL=/ dumbcon=1 single elevator=cfq console=tty0 Initializing CPU#0 PID hash table entries: 2048 (order: 11, 65536 bytes) time.c: Using 1.193182 MHz PIT timer. time.c: Detected 2000.102 MHz processor. Console: Colour VGA+ 80x25 vc:1-16 Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Memory: 509668k/524224k available (2547k kernel code, 13796k reserved, 831k data, 176k init) Calibrating delay loop... 3940.35 BogoMIPS (lpj=1970176) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 256 (order: 0, 4096 bytes) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU: AMD Athlon(tm) 64 Processor 3200+ stepping 08 Using local APIC NMI watchdog using perfctr0 Using local APIC timer interrupts. Detected 12.500 MHz APIC timer. checking if image is initramfs... it is NET: Registered protocol family 16 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20041105 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: Power Resource [URP1] (off) ACPI: Power Resource [URP2] (off) ACPI: Power Resource [FDDP] (off) ACPI: Power Resource [LPTP] (off) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 9 devices usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing ** PCI interrupts are no longer routed automatically. If this ** causes a device to stop working, it is probably because the ** driver failed to call pci_enable_device(). As a temporary ** workaround, the "pci=routeirq" argument restores the old ** behavior. If this argument makes the device work again, ** please email the output of "lspci" to bjorn.helgaas@hp.com ** so I can fix the driver. agpgart: Detected AGP bridge 0 agpgart: Maximum main memory to use for agp memory: 439M agpgart: AGP aperture is 128M @ 0xd0000000 PCI-DMA: Disabling IOMMU. IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ audit: initializing netlink socket (disabled) audit(1102255340.225:0): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) SELinux: Registering netfilter hooks seclvl: seclvl_init: seclvl: Failure registering with the kernel. selinux_register_security: There is already a secondary security module registered. seclvl: seclvl_init: seclvl: Failure registering with primary security module. seclvl: Error during initialization: rc = [-22] Initializing Cryptographic API pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Console: mono dummy device 80x25 vc:17-17 Real Time Clock Driver v1.12 Linux agpgart interface v0.100 (c) Dave Jones serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize divert: not allocating divert_blk for non-ethernet device lo Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:0f.1 ACPI: PCI interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 169 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1 ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: Maxtor 6Y120L0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: LITE-ON COMBO LTC-48161H, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 Probing IDE interface ide2... ide2: Wait for ready failed before probe ! Probing IDE interface ide3... ide3: Wait for ready failed before probe ! Probing IDE interface ide4... ide4: Wait for ready failed before probe ! Probing IDE interface ide5... ide5: Wait for ready failed before probe ! hda: max request size: 128KiB hda: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(133) hda: cache flushes supported hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 > hdc: ATAPI 48X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice keyboard.c: [AT Raw Set 2 keyboard] vc:1-16 input: AT Raw Set 2 keyboard on isa0060/serio1 keyboard.c: [AT Translated Set 2 keyboard] vc:17-17 input: AT Translated Set 2 keyboard on isa0060/serio0 md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP: routing cache hash table of 512 buckets, 28Kbytes TCP: Hash tables configured (established 32768 bind 4681) Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.00.09e) powernow-k8: BIOS error - no PSB ACPI wakeup devices: PCI0 UAR1 USB1 USB2 USB3 USB4 EHCI USBD AC9 MC9 ILAN SLPB ACPI: (supports S0 S1 S4 S5) Freeing unused kernel memory: 176k freed SCSI subsystem initialized libata version 1.10 loaded. sata_via version 1.0 ACPI: PCI interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 169 sata_via(0000:00:0f.0): routed to hard irq line 10 ata1: SATA max UDMA/133 cmd 0xD400 ctl 0xD002 bmdma 0xC400 irq 169 ata2: SATA max UDMA/133 cmd 0xCC00 ctl 0xC802 bmdma 0xC408 irq 169 ata1: no device found (phy stat 00000000) scsi0 : sata_via ata2: no device found (phy stat 00000000) scsi1 : sata_via sata_promise version 1.01 ACPI: PCI interrupt 0000:00:0d.0[A] -> GSI 17 (level, low) -> IRQ 177 ata3: SATA max UDMA/133 cmd 0xFFFFFF000001A200 ctl 0xFFFFFF000001A238 bmdma 0x0 irq 177 ata4: SATA max UDMA/133 cmd 0xFFFFFF000001A280 ctl 0xFFFFFF000001A2B8 bmdma 0x0 irq 177 ata3: no device found (phy stat 00000000) scsi2 : sata_promise ata4: no device found (phy stat 00000000) scsi3 : sata_promise EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. security: 3 users, 4 roles, 305 types, 19 bools security: 53 classes, 6688 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev hda10, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), not configured for labeling SELinux: initialized (dev hugetlbfs, type hugetlbfs), not configured for labeling SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev eventpollfs, type eventpollfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts inserting floppy driver for 2.6.10-rc3-ruby Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 orinoco 0.13e (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al) orinoco_pci 0.13e (Pavel Roskin <proski@gnu.org>, David Gibson <hermes@gibson.dropbear.id.au> & Jean Tourrilhes <jt@hpl.hp.com>) ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 19 (level, low) -> IRQ 185 orinoco_pci: Detected Orinoco/Prism2 PCI device at 0000:00:08.0, mem:0xCFBFD000 to 0xCFBFDFFF -> 0xffffff000001c000, irq:185 Reset done..............................................................................................................................................................................................................................................................; Clear Reset...........................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................; pci_cor : reg = 0x0 - FFFB9F02 - FFFB9D0E divert: allocating divert_blk for eth0 eth0: Station identity 001f:0006:0001:0003 eth0: Looks like an Intersil firmware version 1.3.6 eth0: Ad-hoc demo mode supported eth0: IEEE standard IBSS ad-hoc mode supported eth0: WEP supported, 104-bit key eth0: MAC address 00:09:5B:91:B2:E4 eth0: Station name "Prism I" eth0: ready r8169 Gigabit Ethernet driver 1.2 loaded ACPI: PCI interrupt 0000:00:0b.0[A] -> GSI 16 (level, low) -> IRQ 193 r8169: NAPI enabled divert: allocating divert_blk for eth1 eth1: Identified chip type is 'RTL8169s/8110s'. eth1: RTL8169 at 0xffffff000001ef00, 00:0c:76:52:dc:54, IRQ 193 via82xx: Assuming DXS channels with 48k fixed sample rate. Please try dxs_support=1 or dxs_support=4 option and report if it works on your machine. ACPI: PCI interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 201 PCI: Via IRQ fixup for 0000:00:11.5, from 3 to 9 PCI: Setting latency timer of device 0000:00:11.5 to 64 ACPI: PCI interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 209 ehci_hcd 0000:00:10.4: EHCI Host Controller ehci_hcd 0000:00:10.4: irq 209, pci mem 0xcfffbd00 ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:10.4: USB 2.0 initialized, EHCI 1.00, driver 26 Oct 2004 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected USB Universal Host Controller Interface driver v2.2 ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 209 PCI: Via IRQ fixup for 0000:00:10.0, from 11 to 1 uhci_hcd 0000:00:10.0: UHCI Host Controller uhci_hcd 0000:00:10.0: irq 209, io base 0xb000 uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 209 PCI: Via IRQ fixup for 0000:00:10.1, from 11 to 1 uhci_hcd 0000:00:10.1: UHCI Host Controller uhci_hcd 0000:00:10.1: irq 209, io base 0xb400 uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 209 PCI: Via IRQ fixup for 0000:00:10.2, from 10 to 1 uhci_hcd 0000:00:10.2: UHCI Host Controller uhci_hcd 0000:00:10.2: irq 209, io base 0xb800 uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 209 PCI: Via IRQ fixup for 0000:00:10.3, from 10 to 1 uhci_hcd 0000:00:10.3: UHCI Host Controller uhci_hcd 0000:00:10.3: irq 209, io base 0xbc00 uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org> ACPI: PCI interrupt 0000:00:0e.0[A] -> GSI 19 (level, low) -> IRQ 185 ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[185] MMIO=[cffee000-cffee7ff] Max Packet=[2048] md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. usb 3-1: new low speed USB device using uhci_hcd and address 2 input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:10.1-1 usb 3-2: new low speed USB device using uhci_hcd and address 3 ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (CM) [SLPB] ibm_acpi: ec object not found input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:10.1-2 ieee1394: Host added: ID:BUS[0-00:1023] GUID[0010dc00002c4af2] usb 5-2: new full speed USB device using uhci_hcd and address 2 EXT3 FS on hda10, internal journal device-mapper: 4.3.0-ioctl (2004-09-30) initialised: dm-devel@redhat.com kjournald starting. Commit interval 5 seconds EXT3 FS on hda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev hda1, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled SGI XFS Quota Management subsystem XFS mounting filesystem hda2 Starting XFS recovery on filesystem: hda2 (dev: hda2) Ending XFS recovery on filesystem: hda2 (dev: hda2) SELinux: initialized (dev hda2, type xfs), uses xattr XFS mounting filesystem hda5 Ending clean XFS mount for filesystem: hda5 SELinux: initialized (dev hda5, type xfs), uses xattr XFS mounting filesystem hda7 Starting XFS recovery on filesystem: hda7 (dev: hda7) Ending XFS recovery on filesystem: hda7 (dev: hda7) SELinux: initialized (dev hda7, type xfs), uses xattr XFS mounting filesystem hda11 Starting XFS recovery on filesystem: hda11 (dev: hda11) Ending XFS recovery on filesystem: hda11 (dev: hda11) SELinux: initialized (dev hda11, type xfs), uses xattr XFS mounting filesystem hda6 Starting XFS recovery on filesystem: hda6 (dev: hda6) Ending XFS recovery on filesystem: hda6 (dev: hda6) SELinux: initialized (dev hda6, type xfs), uses xattr XFS mounting filesystem hda9 Starting XFS recovery on filesystem: hda9 (dev: hda9) Ending XFS recovery on filesystem: hda9 (dev: hda9) SELinux: initialized (dev hda9, type xfs), uses xattr XFS mounting filesystem hda8 Starting XFS recovery on filesystem: hda8 (dev: hda8) Ending XFS recovery on filesystem: hda8 (dev: hda8) SELinux: initialized (dev hda8, type xfs), uses xattr Adding 522104k swap on /dev/hda3. Priority:-1 extents:1 SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts parport_pc: Ignoring new-style parameters in presence of obsolete ones parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP] Trying to free free DMA3 pnp: Device 00:02 disabled. ip_tables: (C) 2000-2002 Netfilter core team ip_conntrack version 2.1 (2047 buckets, 16376 max) - 504 bytes per conntrack eth0: New link status: Connected (0001) SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts i2c /dev entries driver parport_pc: Ignoring new-style parameters in presence of obsolete ones pnp: Device 00:02 activated. parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP] lp0: using parport0 (interrupt-driven). lp0: console ready NET: Registered protocol family 10 Disabled Privacy Extensions on device ffffffff8040aa60(lo) IPv6 over IPv4 tunneling driver divert: not allocating divert_blk for non-ethernet device sit0 eth0: New link status: Disconnected (0002) eth0: New link status: Connected (0001) eth0: no IPv6 routers present vmmon: module license 'unspecified' taints kernel. /dev/vmmon: Module vmmon: registered with major=10 minor=165 /dev/vmmon: Module vmmon: initialized /dev/vmnet: open called by PID 5010 (vmnet-bridge) /dev/vmnet: hub 0 does not exist, allocating memory. /dev/vmnet: port on hub 0 successfully opened bridge-eth1: peer interface eth1 not found, will wait for it to come up bridge-eth1: attached /dev/vmnet: open called by PID 5093 (vmnet-natd) /dev/vmnet: hub 8 does not exist, allocating memory. /dev/vmnet: port on hub 8 successfully opened /dev/vmnet: open called by PID 7526 (vmnet-netifup) /dev/vmnet: port on hub 8 successfully opened divert: allocating divert_blk for vmnet8 /dev/vmnet: open called by PID 7525 (vmnet-netifup) /dev/vmnet: hub 1 does not exist, allocating memory. /dev/vmnet: port on hub 1 successfully opened divert: allocating divert_blk for vmnet1 /dev/vmnet: open called by PID 7766 (vmnet-dhcpd) /dev/vmnet: port on hub 8 successfully opened /dev/vmnet: open called by PID 7635 (vmnet-dhcpd) /dev/vmnet: port on hub 1 successfully opened ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 17 (level, low) -> IRQ 177 [drm] Initialized radeon 1.11.0 20020828 on minor 0: ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 193 [drm] Initialized radeon 1.11.0 20020828 on minor 1: vmnet1: no IPv6 routers present vmnet8: no IPv6 routers present agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode agpgart: Putting AGP V3 device at 0000:01:00.0 into 4x mode [drm] Loading R200 Microcode /dev/vmnet: open called by PID 8847 (vmware-vmx) /dev/vmnet: port on hub 8 successfully opened /dev/vmmon: host clock rate change request 0 -> 19 /dev/vmmon: host clock rate change request 19 -> 0 vmmon: Had to deallocate locked 1280 pages from vm driver 0000010010219c00 vmmon: Had to deallocate AWE 1396 pages from vm driver 0000010010219c00 /dev/vmnet: open called by PID 8917 (vmware-vmx) /dev/vmnet: port on hub 8 successfully opened /dev/vmmon: host clock rate change request 0 -> 19 /dev/vmmon: host clock rate change request 19 -> 63 /dev/vmmon: host clock rate change request 63 -> 200 /dev/vmmon: host clock rate change request 200 -> 201 Losing some ticks... checking if CPU frequency changed.
| |