lkml.org 
[lkml]   [2004]   [Nov]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: CD-ROM problem on x86-64
    Zwane Mwaikambo írta:
    > On Sat, 27 Nov 2004, Zoltan Boszormenyi wrote:
    >
    >
    >>Sorry, this last statement is not true, just compare the two error
    >>reports above. Both hda and hdc show this error.
    >
    >
    > Please provide full dmesg, lspci and if possible state around which kernel
    > version the problems began occuring
    >
    > Thanks,
    > Zwane

    They are attached. I am running the linuxconsole.sf.net multiconsole
    extension, I patched the Fedora Core 3 original and the second errata
    kernel with it and made a custom RPM.

    $ rpm -q kernel
    kernel-2.6.9-1.667
    kernel-2.6.9-1.667ruby.root
    kernel-2.6.9-1.681ruby_FC3.root
    $ uname -a
    Linux wl-193.226.227-37-szolnok.dunaweb.hu 2.6.9-1.681ruby_FC3.root #1
    Wed Nov 24 20:26:05 CET 2004 x86_64 x86_64 x86_64 GNU/Linux

    I used my machine this way with my old FC1 installation,
    I had linux-2.6.8.1 with the above mentioned patch before
    I reinstalled my machine with FC3. It definitely didn't show
    this error. It was a 32-bit system, now I have a 64-bit system
    installed. I had VMWare installed then and also now. My Realtek 8169
    ethernet's (soldered on the mainboard) driver also filled my log up
    since it isn't connected to anywhere:

    r8169: eth1: PHY reset until link up

    But what I haven't seen in my logs at that time is this:

    Losing some ticks... checking if CPU frequency changed.

    and

    warning: many lost ticks.
    Your time source seems to be instable or some driver is hogging interupts
    rip rtl8169_phy_timer+0x1b2/0x1ba [r8169]

    Could it be the cause? I will test whether it helps if I disable
    it at boot time.

    The mainboard is an MSI K8T Neo FIS2R, all other peripherals you
    can find in dmesg and lspci outputs.

    Best regards,
    Zoltán Böszörményi
    Bootdata ok (command line is ro root=LABEL=/ dumbcon=1 rhgb quiet)
    Linux version 2.6.9-1.681ruby_FC3.root (root@wl-193.226.227-37-szolnok.dunaweb.hu) (gcc version 3.4.2 20041017 (Red Hat 3.4.2-6.fc3)) #1 Wed Nov 24 20:26:05 CET 2004
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000cc000 - 00000000000d6000 (reserved)
    BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
    BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data)
    BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS)
    BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
    No mptable found.
    On node 0 totalpages: 131056
    DMA zone: 4096 pages, LIFO batch:1
    Normal zone: 126960 pages, LIFO batch:16
    HighMem zone: 0 pages, LIFO batch:1
    ACPI: RSDP (v000 AMI ) @ 0x00000000000fa3f0
    ACPI: RSDT (v001 AMIINT VIA_K8 0x00000010 MSFT 0x00000097) @ 0x000000001fff0000
    ACPI: FADT (v001 AMIINT VIA_K8 0x00000011 MSFT 0x00000097) @ 0x000000001fff0030
    ACPI: MADT (v001 AMIINT VIA_K8 0x00000009 MSFT 0x00000097) @ 0x000000001fff00c0
    ACPI: DSDT (v001 VIA VIA_K8 0x00001000 MSFT 0x0100000d) @ 0x0000000000000000
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    Processor #0 15:4 APIC version 16
    ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Using ACPI (MADT) for SMP configuration information
    Checking aperture...
    CPU 0: aperture @ d0000000 size 128 MB
    Built 1 zonelists
    Kernel command line: ro root=LABEL=/ dumbcon=1 rhgb quiet console=tty0
    Initializing CPU#0
    PID hash table entries: 2048 (order: 11, 65536 bytes)
    time.c: Using 1.193182 MHz PIT timer.
    time.c: Detected 2000.130 MHz processor.
    Console: Colour VGA+ 80x25 vc:1-16
    Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
    Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
    Memory: 509312k/524224k available (2408k kernel code, 14156k reserved, 1292k data, 164k init)
    Calibrating delay loop... 3940.35 BogoMIPS (lpj=1970176)
    Security Scaffold v1.0.0 initialized
    SELinux: Initializing.
    SELinux: Starting in permissive mode
    There is already a security framework initialized, register_security failed.
    selinux_register_security: Registering secondary module capability
    Capability LSM initialized as secondary
    Mount-cache hash table entries: 256 (order: 0, 4096 bytes)
    CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    CPU: L2 Cache: 1024K (64 bytes/line)
    CPU: AMD Athlon(tm) 64 Processor 3200+ stepping 08
    Using local APIC NMI watchdog using perfctr0
    Using local APIC timer interrupts.
    Detected 12.500 MHz APIC timer.
    checking if image is initramfs... it is
    NET: Registered protocol family 16
    PCI: Using configuration type 1
    mtrr: v2.0 (20020519)
    ACPI: Subsystem revision 20040816
    ACPI: Interpreter enabled
    ACPI: Using IOAPIC for interrupt routing
    ACPI: PCI Root Bridge [PCI0] (00:00)
    PCI: Probing PCI hardware (bus 00)
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: Power Resource [URP1] (off)
    ACPI: Power Resource [URP2] (off)
    ACPI: Power Resource [FDDP] (off)
    ACPI: Power Resource [LPTP] (off)
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
    usbcore: registered new driver usbfs
    usbcore: registered new driver hub
    PCI: Using ACPI for IRQ routing
    ACPI: PCI interrupt 0000:00:05.0[A] -> GSI 16 (level, low) -> IRQ 169
    ACPI: PCI interrupt 0000:00:05.1[A] -> GSI 16 (level, low) -> IRQ 169
    ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 17 (level, low) -> IRQ 177
    ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 19 (level, low) -> IRQ 185
    ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 177
    ACPI: PCI interrupt 0000:00:0b.0[A] -> GSI 16 (level, low) -> IRQ 169
    ACPI: PCI interrupt 0000:00:0d.0[A] -> GSI 17 (level, low) -> IRQ 177
    ACPI: PCI interrupt 0000:00:0e.0[A] -> GSI 19 (level, low) -> IRQ 185
    ACPI: PCI interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 193
    ACPI: PCI interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 193
    ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 201
    ACPI: PCI interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 201
    ACPI: PCI interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 201
    ACPI: PCI interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 201
    ACPI: PCI interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 201
    ACPI: PCI interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 209
    ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 169
    agpgart: Detected AGP bridge 0
    agpgart: Maximum main memory to use for agp memory: 439M
    agpgart: AGP aperture is 128M @ 0xd0000000
    PCI-DMA: Disabling IOMMU.
    IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
    audit: initializing netlink socket (disabled)
    audit(1101574061.193:0): initialized
    Total HugeTLB memory allocated, 0
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    SELinux: Registering netfilter hooks
    Initializing Cryptographic API
    ksign: Installing public key data
    Loading keyring
    - Added public key A617AC2237592777
    - User ID: Red Hat, Inc. (Kernel Module GPG key)
    PCI: Via IRQ fixup for 0000:00:10.0, from 11 to 9
    PCI: Via IRQ fixup for 0000:00:10.1, from 11 to 9
    PCI: Via IRQ fixup for 0000:00:10.2, from 10 to 9
    PCI: Via IRQ fixup for 0000:00:10.3, from 10 to 9
    PCI: Via IRQ fixup for 0000:00:11.5, from 3 to 1
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    vesafb: probe of vesafb0 failed with error -6
    ACPI: Processor [CPU1] (supports C1)
    Console: mono dummy device 80x25 vc:17-17
    Real Time Clock Driver v1.12
    Linux agpgart interface v0.100 (c) Dave Jones
    serio: i8042 AUX port at 0x60,0x64 irq 12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
    ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
    divert: not allocating divert_blk for non-ethernet device lo
    Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    VP_IDE: IDE controller at PCI slot 0000:00:0f.1
    ACPI: PCI interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 193
    VP_IDE: chipset revision 6
    VP_IDE: not 100% native mode: will probe irqs later
    VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
    ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
    Probing IDE interface ide0...
    hda: Maxtor 6Y120L0, ATA DISK drive
    Using cfq io scheduler
    ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    Probing IDE interface ide1...
    hdc: LITE-ON COMBO LTC-48161H, ATAPI CD/DVD-ROM drive
    ide1 at 0x170-0x177,0x376 on irq 15
    Probing IDE interface ide2...
    ide2: Wait for ready failed before probe !
    Probing IDE interface ide3...
    ide3: Wait for ready failed before probe !
    Probing IDE interface ide4...
    ide4: Wait for ready failed before probe !
    Probing IDE interface ide5...
    ide5: Wait for ready failed before probe !
    hda: max request size: 128KiB
    hda: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(133)
    hda: cache flushes supported
    hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 >
    hdc: ATAPI 32X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
    Uniform CD-ROM driver Revision: 3.20
    ide-floppy driver 0.99.newide
    usbcore: registered new driver hiddev
    usbcore: registered new driver usbhid
    drivers/usb/input/hid-core.c: v2.0:USB HID core driver
    mice: PS/2 mouse device common for all mice
    keyboard.c: [AT Raw Set 2 keyboard] vc:1-16
    input: AT Raw Set 2 keyboard on isa0060/serio1
    keyboard.c: [AT Translated Set 2 keyboard] vc:17-17
    input: AT Translated Set 2 keyboard on isa0060/serio0
    md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
    NET: Registered protocol family 2
    IP: routing cache hash table of 512 buckets, 28Kbytes
    TCP: Hash tables configured (established 32768 bind 4681)
    Initializing IPsec netlink socket
    NET: Registered protocol family 1
    NET: Registered protocol family 17
    powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.00.09b)
    powernow-k8: BIOS error - no PSB
    ACPI: (supports S0 S1 S4 S5)
    ACPI wakeup devices:
    PCI0 UAR1 USB1 USB2 USB3 USB4 EHCI USBD AC9 MC9 ILAN SLPB
    Freeing unused kernel memory: 164k freed
    SCSI subsystem initialized
    libata version 1.02 loaded.
    sata_via version 0.20
    ACPI: PCI interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 193
    sata_via(0000:00:0f.0): routed to hard irq line 10
    ata1: SATA max UDMA/133 cmd 0xD400 ctl 0xD002 bmdma 0xC400 irq 193
    ata2: SATA max UDMA/133 cmd 0xCC00 ctl 0xC802 bmdma 0xC408 irq 193
    ata1: no device found (phy stat 00000000)
    scsi0 : sata_via
    ata2: no device found (phy stat 00000000)
    scsi1 : sata_via
    sata_promise version 1.00
    ACPI: PCI interrupt 0000:00:0d.0[A] -> GSI 17 (level, low) -> IRQ 177
    ata3: SATA max UDMA/133 cmd 0xFFFFFF000001A200 ctl 0xFFFFFF000001A238 bmdma 0x0 irq 177
    ata4: SATA max UDMA/133 cmd 0xFFFFFF000001A280 ctl 0xFFFFFF000001A2B8 bmdma 0x0 irq 177
    ata3: no device found (phy stat 00000000)
    scsi2 : sata_promise
    ata4: no device found (phy stat 00000000)
    scsi3 : sata_promise
    EXT3-fs: INFO: recovery required on readonly filesystem.
    EXT3-fs: write access will be enabled during recovery.
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: recovery complete.
    EXT3-fs: mounted filesystem with ordered data mode.
    security: 3 users, 4 roles, 280 types, 16 bools
    security: 53 classes, 5494 rules
    SELinux: Completing initialization.
    SELinux: Setting up existing superblocks.
    SELinux: initialized (dev hda10, type ext3), uses xattr
    SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
    SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
    SELinux: initialized (dev mqueue, type mqueue), not configured for labeling
    SELinux: initialized (dev hugetlbfs, type hugetlbfs), not configured for labeling
    SELinux: initialized (dev devpts, type devpts), uses transition SIDs
    SELinux: initialized (dev eventpollfs, type eventpollfs), uses genfs_contexts
    SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
    SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
    SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
    SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
    SELinux: initialized (dev proc, type proc), uses genfs_contexts
    SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
    SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
    SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
    SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
    inserting floppy driver for 2.6.9-1.681ruby_FC3.root
    Floppy drive(s): fd0 is 1.44M
    FDC 0 is a post-1991 82077
    orinoco 0.13e (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al)
    orinoco_pci 0.13e (Pavel Roskin <proski@gnu.org>, David Gibson <hermes@gibson.dropbear.id.au> & Jean Tourrilhes <jt@hpl.hp.com>)
    ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 19 (level, low) -> IRQ 185
    orinoco_pci: Detected Orinoco/Prism2 PCI device at 0000:00:08.0, mem:0xCFBFD000 to 0xCFBFDFFF -> 0xffffff000001c000, irq:185
    Reset done..............................................................................................................................................................................................................................................................;
    Clear Reset............................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................;
    pci_cor : reg = 0x0 - FFFB9D12 - FFFB9B1E
    divert: allocating divert_blk for eth0
    eth0: Station identity 001f:0006:0001:0003
    eth0: Looks like an Intersil firmware version 1.3.6
    eth0: Ad-hoc demo mode supported
    eth0: IEEE standard IBSS ad-hoc mode supported
    eth0: WEP supported, 104-bit key
    eth0: MAC address 00:09:5B:91:B2:E4
    eth0: Station name "Prism I"
    eth0: ready
    r8169 Gigabit Ethernet driver 1.2 loaded
    ACPI: PCI interrupt 0000:00:0b.0[A] -> GSI 16 (level, low) -> IRQ 169
    r8169: NAPI enabled
    divert: allocating divert_blk for eth1
    eth1: Identified chip type is 'RTL8169s/8110s'.
    eth1: RTL8169 at 0xffffff000001ef00, 00:0c:76:52:dc:54, IRQ 169
    via82xx: Assuming DXS channels with 48k fixed sample rate.
    Please try dxs_support=1 or dxs_support=4 option
    and report if it works on your machine.
    ACPI: PCI interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 209
    PCI: Setting latency timer of device 0000:00:11.5 to 64
    ACPI: PCI interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 201
    ehci_hcd 0000:00:10.4: EHCI Host Controller
    ehci_hcd 0000:00:10.4: irq 201, pci mem ffffff0000076d00
    SELinux: initialized (dev usbdevfs, type usbdevfs), uses genfs_contexts
    ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
    ehci_hcd 0000:00:10.4: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 8 ports detected
    USB Universal Host Controller Interface driver v2.2
    ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 201
    uhci_hcd 0000:00:10.0: UHCI Host Controller
    uhci_hcd 0000:00:10.0: irq 201, io base 000000000000b000
    uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    ACPI: PCI interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 201
    uhci_hcd 0000:00:10.1: UHCI Host Controller
    uhci_hcd 0000:00:10.1: irq 201, io base 000000000000b400
    uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    ACPI: PCI interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 201
    uhci_hcd 0000:00:10.2: UHCI Host Controller
    uhci_hcd 0000:00:10.2: irq 201, io base 000000000000b800
    uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    ACPI: PCI interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 201
    uhci_hcd 0000:00:10.3: UHCI Host Controller
    uhci_hcd 0000:00:10.3: irq 201, io base 000000000000bc00
    uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 2 ports detected
    ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org>
    ACPI: PCI interrupt 0000:00:0e.0[A] -> GSI 19 (level, low) -> IRQ 185
    ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[185] MMIO=[cffee000-cffee7ff] Max Packet=[2048]
    md: Autodetecting RAID arrays.
    md: autorun ...
    md: ... autorun DONE.
    usb 3-1: new low speed USB device using address 2
    input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:10.1-1
    usb 3-2: new low speed USB device using address 3
    ACPI: Power Button (FF) [PWRF]
    ACPI: Sleep Button (CM) [SLPB]
    input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:10.1-2
    ieee1394: Host added: ID:BUS[0-00:1023] GUID[0010dc00002c4af2]
    usb 5-2: new full speed USB device using address 2
    EXT3 FS on hda10, internal journal
    device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com
    hdc: command error: status=0x51 { DriveReady SeekComplete Error }
    hdc: command error: error=0x54
    ide: failed opcode was 100
    end_request: I/O error, dev hdc, sector 1436800
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on hda1, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    SELinux: initialized (dev hda1, type ext3), uses xattr
    SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
    SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
    SGI XFS Quota Management subsystem
    XFS mounting filesystem hda2
    Starting XFS recovery on filesystem: hda2 (dev: hda2)
    Ending XFS recovery on filesystem: hda2 (dev: hda2)
    SELinux: initialized (dev hda2, type xfs), uses xattr
    XFS mounting filesystem hda5
    Ending clean XFS mount for filesystem: hda5
    SELinux: initialized (dev hda5, type xfs), uses xattr
    XFS mounting filesystem hda7
    Starting XFS recovery on filesystem: hda7 (dev: hda7)
    Ending XFS recovery on filesystem: hda7 (dev: hda7)
    SELinux: initialized (dev hda7, type xfs), uses xattr
    XFS mounting filesystem hda11
    Starting XFS recovery on filesystem: hda11 (dev: hda11)
    Ending XFS recovery on filesystem: hda11 (dev: hda11)
    SELinux: initialized (dev hda11, type xfs), uses xattr
    XFS mounting filesystem hda6
    Starting XFS recovery on filesystem: hda6 (dev: hda6)
    Ending XFS recovery on filesystem: hda6 (dev: hda6)
    SELinux: initialized (dev hda6, type xfs), uses xattr
    XFS mounting filesystem hda9
    Starting XFS recovery on filesystem: hda9 (dev: hda9)
    Ending XFS recovery on filesystem: hda9 (dev: hda9)
    SELinux: initialized (dev hda9, type xfs), uses xattr
    XFS mounting filesystem hda8
    Starting XFS recovery on filesystem: hda8 (dev: hda8)
    Ending XFS recovery on filesystem: hda8 (dev: hda8)
    SELinux: initialized (dev hda8, type xfs), uses xattr
    SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
    NET: Registered protocol family 10
    Disabled Privacy Extensions on device ffffffff80452a20(lo)
    IPv6 over IPv4 tunneling driver
    divert: not allocating divert_blk for non-ethernet device sit0
    Adding 522104k swap on /dev/hda3. Priority:-1 extents:1
    SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
    parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
    parport0: irq 7 detected
    ip_tables: (C) 2000-2002 Netfilter core team
    ip_conntrack version 2.1 (2047 buckets, 16376 max) - 496 bytes per conntrack
    Linux Kernel Card Services
    options: [pci] [cardbus] [pm]
    eth0: New link status: Connected (0001)
    SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
    i2c /dev entries driver
    eth0: no IPv6 routers present
    parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
    parport0: irq 7 detected
    lp0: using parport0 (polling).
    lp0: console ready
    r8169: eth1: PHY reset until link up
    eth1: no IPv6 routers present
    vmmon: module license 'unspecified' taints kernel.
    vmmon: no version for "sys_ioctl" found: kernel tainted.
    /dev/vmmon: Module vmmon: registered with major=10 minor=165
    /dev/vmmon: Module vmmon: initialized
    /dev/vmnet: open called by PID 3497 (vmnet-bridge)
    /dev/vmnet: hub 0 does not exist, allocating memory.
    /dev/vmnet: port on hub 0 successfully opened
    bridge-eth1: enabling the bridge
    bridge-eth1: up
    bridge-eth1: already up
    bridge-eth1: attached
    /dev/vmnet: open called by PID 3520 (vmnet-natd)
    /dev/vmnet: hub 8 does not exist, allocating memory.
    /dev/vmnet: port on hub 8 successfully opened
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    /dev/vmnet: open called by PID 5740 (vmnet-netifup)
    /dev/vmnet: hub 1 does not exist, allocating memory.
    /dev/vmnet: port on hub 1 successfully opened
    divert: allocating divert_blk for vmnet1
    /dev/vmnet: open called by PID 5747 (vmnet-netifup)
    /dev/vmnet: port on hub 8 successfully opened
    divert: allocating divert_blk for vmnet8
    /dev/vmnet: open called by PID 6193 (vmnet-dhcpd)
    /dev/vmnet: port on hub 8 successfully opened
    /dev/vmnet: open called by PID 6198 (vmnet-dhcpd)
    /dev/vmnet: port on hub 1 successfully opened
    ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 17 (level, low) -> IRQ 177
    [drm] Initialized radeon 1.11.0 20020828 on minor 0:
    ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 169
    [drm] Initialized radeon 1.11.0 20020828 on minor 1:
    r8169: eth1: PHY reset until link up
    vmnet1: no IPv6 routers present
    vmnet8: no IPv6 routers present
    agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
    agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode
    agpgart: Putting AGP V3 device at 0000:01:00.0 into 4x mode
    [drm] Loading R200 Microcode
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    SELinux: initialized (dev hdc, type iso9660), uses genfs_contexts
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    Losing some ticks... checking if CPU frequency changed.
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    warning: many lost ticks.
    Your time source seems to be instable or some driver is hogging interupts
    rip rtl8169_phy_timer+0x1b2/0x1ba [r8169]
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    ISO 9660 Extensions: Microsoft Joliet Level 3
    ISO 9660 Extensions: RRIP_1991A
    SELinux: initialized (dev hdc, type iso9660), uses genfs_contexts
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    application mozilla-bin uses obsolete OSS audio interface
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    r8169: eth1: PHY reset until link up
    00:00.0 Host bridge: VIA Technologies, Inc. VT8385 [K8T800 AGP] Host Bridge (rev 01)
    Subsystem: VIA Technologies, Inc. VT8385 [K8T800 AGP] Host Bridge
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
    Latency: 8
    Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
    Capabilities: [80] AGP version 3.0
    Status: RQ=32 Iso- ArqSz=0 Cal=2 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3+ Rate=x4,x8
    Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x4
    Capabilities: [c0] HyperTransport: Slave or Primary Interface
    !!! Possibly incomplete decoding
    Command: BaseUnitID=0 UnitCnt=3 MastHost- DefDir-
    Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
    Link Config 0: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
    Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0
    Link Config 1: MLWI=8bit MLWO=8bit LWI=8bit LWO=8bit
    Revision ID: 1.02
    Capabilities: [68] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [58] HyperTransport: Interrupt Discovery and Configuration
    00: 06 11 88 31 06 00 30 22 01 00 00 06 00 08 00 00
    10: 08 00 00 d0 00 00 00 00 00 00 00 00 00 00 00 00
    20: 00 00 00 00 00 00 00 00 00 00 00 00 06 11 88 31
    30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00

    00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800 South] (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
    Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0
    Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
    I/O behind bridge: 00009000-00009fff
    Memory behind bridge: cfc00000-cfcfffff
    Prefetchable memory behind bridge: 9fb00000-bfafffff
    Secondary status: 66Mhz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
    BridgeCtl: Parity- SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B-
    Capabilities: [80] Power Management version 2
    Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    00: 06 11 88 b1 07 01 30 02 00 00 04 06 00 00 01 00
    10: 00 00 00 00 00 00 00 00 00 01 01 00 90 90 20 22
    20: c0 cf c0 cf b0 9f a0 bf 00 00 00 00 00 00 00 00
    30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 0e 00

    00:05.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 02)
    Subsystem: Avermedia Technologies Inc: Unknown device 0003
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 32 (4000ns min, 10000ns max)
    Interrupt: pin A routed to IRQ 169
    Region 0: Memory at cfbfe000 (32-bit, prefetchable) [size=4K]
    00: 9e 10 6e 03 06 00 80 02 02 00 00 04 00 20 80 00
    10: 08 e0 bf cf 00 00 00 00 00 00 00 00 00 00 00 00
    20: 00 00 00 00 00 00 00 00 00 00 00 00 61 14 03 00
    30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 01 10 28

    00:05.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 02)
    Subsystem: Avermedia Technologies Inc: Unknown device 0003
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 32 (1000ns min, 63750ns max)
    Interrupt: pin A routed to IRQ 169
    Region 0: Memory at cfbff000 (32-bit, prefetchable) [size=4K]
    00: 9e 10 78 08 06 00 80 02 02 00 80 04 00 20 80 00
    10: 08 f0 bf cf 00 00 00 00 00 00 00 00 00 00 00 00
    20: 00 00 00 00 00 00 00 00 00 00 00 00 61 14 03 00
    30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 01 04 ff

    00:06.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE] (prog-if 00 [VGA])
    Subsystem: PC Partner Limited: Unknown device 7c02
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 32 (2000ns min), Cache Line Size 08
    Interrupt: pin A routed to IRQ 177
    Region 0: Memory at c0000000 (32-bit, prefetchable) [size=128M]
    Region 1: I/O ports at e000 [size=256]
    Region 2: Memory at cffd0000 (32-bit, non-prefetchable) [size=64K]
    Expansion ROM at cff80000 [disabled] [size=128K]
    Capabilities: [50] Power Management version 2
    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    00: 02 10 59 51 87 00 90 02 00 00 00 03 08 20 00 00
    10: 08 00 00 c0 01 e0 00 00 00 00 fd cf 00 00 00 00
    20: 00 00 00 00 00 00 00 00 00 00 00 00 4b 17 02 7c
    30: 00 00 f8 cf 50 00 00 00 00 00 00 00 0a 01 08 00

    00:08.0 Network controller: Intersil Corporation Prism 2.5 Wavelan chipset (rev 01)
    Subsystem: Netgear MA311 802.11b wireless adapter
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 32, Cache Line Size 08
    Interrupt: pin A routed to IRQ 185
    Region 0: Memory at cfbfd000 (32-bit, prefetchable) [size=4K]
    Capabilities: [dc] Power Management version 2
    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    00: 60 12 73 38 17 00 90 02 01 00 80 02 08 20 00 00
    10: 08 d0 bf cf 00 00 00 00 00 00 00 00 00 00 00 00
    20: 00 00 00 00 00 00 00 00 00 00 00 00 85 13 05 41
    30: 00 00 00 00 dc 00 00 00 00 00 00 00 05 01 00 00

    00:0a.0 Multimedia controller: Sigma Designs, Inc. REALmagic Hollywood Plus DVD Decoder (rev 02)
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 32
    Interrupt: pin A routed to IRQ 177
    Region 0: Memory at cfe00000 (32-bit, non-prefetchable) [size=1M]
    Capabilities: [40] Power Management version 1
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    00: 05 11 00 83 06 00 10 02 02 00 80 04 00 20 00 00
    10: 00 00 e0 cf 00 00 00 00 00 00 00 00 00 00 00 00
    20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 01 00 00
    40: 01 00 01 00 00 00 00 00
    00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10)
    Subsystem: Micro-Star International Co., Ltd. K8T NEO 2 motherboard
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 64 (8000ns min, 16000ns max), Cache Line Size 08
    Interrupt: pin A routed to IRQ 169
    Region 0: I/O ports at dc00 [size=256]
    Region 1: Memory at cfffbf00 (32-bit, non-prefetchable) [size=256]
    Expansion ROM at cff60000 [disabled] [size=128K]
    Capabilities: [dc] Power Management version 2
    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    00: ec 10 69 81 17 00 b0 02 10 00 00 02 08 40 00 00
    10: 01 dc 00 00 00 bf ff cf 00 00 00 00 00 00 00 00
    20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 2c 70
    30: 00 00 f6 cf dc 00 00 00 00 00 00 00 0b 01 20 40

    00:0d.0 RAID bus controller: Promise Technology, Inc. PDC20378 (FastTrak 378/SATA 378) (rev 02)
    Subsystem: Micro-Star International Co., Ltd. K8T NEO FIS2R motherboard
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 96 (1000ns min, 4500ns max), Cache Line Size 91
    Interrupt: pin A routed to IRQ 177
    Region 0: I/O ports at ec00 [size=64]
    Region 1: I/O ports at e800 [size=16]
    Region 2: I/O ports at e400 [size=128]
    Region 3: Memory at cffef000 (32-bit, non-prefetchable) [size=4K]
    Region 4: Memory at cffa0000 (32-bit, non-prefetchable) [size=128K]
    Capabilities: [60] Power Management version 2
    Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    00: 5a 10 73 33 17 00 30 02 02 00 04 01 91 60 00 00
    10: 01 ec 00 00 01 e8 00 00 01 e4 00 00 00 f0 fe cf
    20: 00 00 fa cf 00 00 00 00 00 00 00 00 62 14 2e 70
    30: 00 00 00 00 60 00 00 00 00 00 00 00 0a 01 04 12

    00:0e.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80) (prog-if 10 [OHCI])
    Subsystem: Micro-Star International Co., Ltd. K8T NEO 2 motherboard
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 32 (8000ns max), Cache Line Size 08
    Interrupt: pin A routed to IRQ 185
    Region 0: Memory at cffee000 (32-bit, non-prefetchable) [size=2K]
    Region 1: I/O ports at d800 [size=128]
    Capabilities: [50] Power Management version 2
    Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold+)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    00: 06 11 44 30 17 00 10 02 80 10 00 0c 08 20 00 00
    10: 00 e0 fe cf 01 d8 00 00 00 00 00 00 00 00 00 00
    20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 2d 70
    30: 00 00 00 00 50 00 00 00 00 00 00 00 05 01 00 20

    00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80)
    Subsystem: Micro-Star International Co., Ltd. K8T Neo 2 Motherboard
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 32
    Interrupt: pin B routed to IRQ 193
    Region 0: I/O ports at d400 [size=8]
    Region 1: I/O ports at d000 [size=4]
    Region 2: I/O ports at cc00 [size=8]
    Region 3: I/O ports at c800 [size=4]
    Region 4: I/O ports at c400 [size=16]
    Region 5: I/O ports at c000 [size=256]
    Capabilities: [c0] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    00: 06 11 49 31 07 00 90 02 80 00 04 01 00 20 80 00
    10: 01 d4 00 00 01 d0 00 00 01 cc 00 00 01 c8 00 00
    20: 01 c4 00 00 01 c0 00 00 00 00 00 00 62 14 20 70
    30: 00 00 00 00 c0 00 00 00 00 00 00 00 0a 02 00 00

    00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
    Subsystem: Micro-Star International Co., Ltd. K8T NEO 2 motherboard
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 32
    Interrupt: pin A routed to IRQ 193
    Region 4: I/O ports at fc00 [size=16]
    Capabilities: [c0] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    00: 06 11 71 05 07 00 90 02 06 8a 01 01 00 20 00 00
    10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    20: 01 fc 00 00 00 00 00 00 00 00 00 00 62 14 20 70
    30: 00 00 00 00 c0 00 00 00 00 00 00 00 ff 01 00 00

    00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
    Subsystem: Micro-Star International Co., Ltd. K8T NEO 2 motherboard
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 32, Cache Line Size 08
    Interrupt: pin A routed to IRQ 201
    Region 4: I/O ports at b000 [size=32]
    Capabilities: [80] Power Management version 2
    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    00: 06 11 38 30 17 00 10 02 81 00 03 0c 08 20 80 00
    10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    20: 01 b0 00 00 00 00 00 00 00 00 00 00 62 14 20 70
    30: 00 00 00 00 80 00 00 00 00 00 00 00 09 01 00 00

    00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
    Subsystem: Micro-Star International Co., Ltd. K8T NEO 2 motherboard
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 32, Cache Line Size 08
    Interrupt: pin A routed to IRQ 201
    Region 4: I/O ports at b400 [size=32]
    Capabilities: [80] Power Management version 2
    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    00: 06 11 38 30 17 00 10 02 81 00 03 0c 08 20 80 00
    10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    20: 01 b4 00 00 00 00 00 00 00 00 00 00 62 14 20 70
    30: 00 00 00 00 80 00 00 00 00 00 00 00 09 01 00 00

    00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
    Subsystem: Micro-Star International Co., Ltd. K8T NEO 2 motherboard
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 32, Cache Line Size 08
    Interrupt: pin B routed to IRQ 201
    Region 4: I/O ports at b800 [size=32]
    Capabilities: [80] Power Management version 2
    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    00: 06 11 38 30 17 00 10 02 81 00 03 0c 08 20 80 00
    10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    20: 01 b8 00 00 00 00 00 00 00 00 00 00 62 14 20 70
    30: 00 00 00 00 80 00 00 00 00 00 00 00 09 02 00 00

    00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
    Subsystem: Micro-Star International Co., Ltd. K8T NEO 2 motherboard
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 32, Cache Line Size 08
    Interrupt: pin B routed to IRQ 201
    Region 4: I/O ports at bc00 [size=32]
    Capabilities: [80] Power Management version 2
    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    00: 06 11 38 30 17 00 10 02 81 00 03 0c 08 20 80 00
    10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    20: 01 bc 00 00 00 00 00 00 00 00 00 00 62 14 20 70
    30: 00 00 00 00 80 00 00 00 00 00 00 00 09 02 00 00

    00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86) (prog-if 20 [EHCI])
    Subsystem: Micro-Star International Co., Ltd. K8T NEO 2 motherboard
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 32, Cache Line Size 10
    Interrupt: pin C routed to IRQ 201
    Region 0: Memory at cfffbd00 (32-bit, non-prefetchable) [size=256]
    Capabilities: [80] Power Management version 2
    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    00: 06 11 04 31 17 00 10 02 86 20 03 0c 10 20 80 00
    10: 00 bd ff cf 00 00 00 00 00 00 00 00 00 00 00 00
    20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 20 70
    30: 00 00 00 00 80 00 00 00 00 00 00 00 03 03 00 00

    00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800 South]
    Subsystem: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800 South]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0
    Capabilities: [c0] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    00: 06 11 27 32 87 00 10 02 00 00 01 06 00 00 80 00
    10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    20: 00 00 00 00 00 00 00 00 00 00 00 00 06 11 27 32
    30: 00 00 00 00 c0 00 00 00 00 00 00 00 00 00 00 00

    00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
    Subsystem: Micro-Star International Co., Ltd. K8T NEO 2 motherboard
    Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Interrupt: pin C routed to IRQ 209
    Region 0: I/O ports at ac00 [size=256]
    Capabilities: [c0] Power Management version 2
    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    00: 06 11 59 30 01 00 10 02 60 00 01 04 00 00 00 00
    10: 01 ac 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 80 00
    30: 00 00 00 00 c0 00 00 00 00 00 00 00 01 03 00 00

    00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Capabilities: [80] HyperTransport: Host or Secondary Interface
    !!! Possibly incomplete decoding
    Command: WarmRst+ DblEnd-
    Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
    Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
    Revision ID: 1.02
    00: 22 10 00 11 00 00 10 00 00 00 00 06 00 00 80 00
    10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00

    00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    00: 22 10 01 11 00 00 00 00 00 00 00 06 00 00 80 00
    10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

    00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    00: 22 10 02 11 00 00 00 00 00 00 00 06 00 00 80 00
    10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

    00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    00: 22 10 03 11 00 00 00 00 00 00 00 06 00 00 80 00
    10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

    01:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200 SE] (rev 01) (prog-if 00 [VGA])
    Subsystem: PC Partner Limited: Unknown device 7c26
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 32 (2000ns min), Cache Line Size 08
    Interrupt: pin A routed to IRQ 169
    Region 0: Memory at b0000000 (32-bit, prefetchable) [size=128M]
    Region 1: I/O ports at 9800 [size=256]
    Region 2: Memory at cfcf0000 (32-bit, non-prefetchable) [size=64K]
    Expansion ROM at cfcc0000 [disabled] [size=128K]
    Capabilities: [58] AGP version 3.0
    Status: RQ=256 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3+ Rate=x4,x8
    Command: RQ=32 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x4
    Capabilities: [50] Power Management version 2
    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    00: 02 10 64 59 07 00 b0 02 01 00 00 03 08 20 80 00
    10: 08 00 00 b0 01 98 00 00 00 00 cf cf 00 00 00 00
    20: 00 00 00 00 00 00 00 00 00 00 00 00 4b 17 26 7c
    30: 00 00 cc cf 58 00 00 00 00 00 00 00 0b 01 08 00

    01:00.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200 SE] (Secondary) (rev 01)
    Subsystem: PC Partner Limited: Unknown device 7c27
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 32 (2000ns min), Cache Line Size 08
    Region 0: Memory at a8000000 (32-bit, prefetchable) [size=128M]
    Region 1: Memory at cfce0000 (32-bit, non-prefetchable) [size=64K]
    Capabilities: [50] Power Management version 2
    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    00: 02 10 44 5d 07 00 b0 02 01 00 80 03 08 20 00 00
    10: 08 00 00 a8 00 00 ce cf 00 00 00 00 00 00 00 00
    20: 00 00 00 00 00 00 00 00 00 00 00 00 4b 17 27 7c
    30: 00 00 00 00 50 00 00 00 00 00 00 00 ff 00 08 00

    \
     
     \ /
      Last update: 2005-03-22 14:08    [W:0.111 / U:0.100 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site