lkml.org 
[lkml]   [2001]   [Nov]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subjectbttv module intialization takes much time on kernel-2.4.x
Date
Title says it all.  I use bttv module.   When invoking "modprobe bttv" it 
takes several minutes to initialize. When I used kernel-2.2.x it was very
quick, but with kernel-2.4.x it takes a while. But after that, it works
fine.
I don't know why. Any solutions?? or am I doing anything wrong?
For your reference, I use BT878 based card, kernel-2.4.15-pre8 for now and
dmesg gives these messages:
----snip----snip-----
i2c-core.o: i2c core module
i2c-algo-bit.o: i2c bit algorithm module
bttv: driver version 0.7.83 loaded
bttv: using 2 buffers with 2080k (4160k total) for capture
bttv: Host bridge is Intel Corp. 82815 815 Chipset Host Bridge and Memory
Controller Hub
bttv: Bt8xx card found (0).
PCI: Found IRQ 5 for device 02:05.0
PCI: Sharing IRQ 5 with 02:05.1
bttv0: Bt878 (rev 17) at 02:05.0, irq: 5, latency: 32, memory: 0xe0000000
bttv0: using: BT878( *** UNKNOWN/GENERIC **) [card=0,autodetected]
i2c-core.o: adapter bt848 #0 registered as adapter 0.
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
i2c-core.o: driver i2c TV tuner driver registered.
------snip-----snip------
TIA

--
Tetsuji Rai (in Tokyo)
http://www.geocities.com/tetsuji_rai
Fax: +1-708-570-4868 (in the US)
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:13    [W:0.064 / U:27.724 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site