lkml.org 
[lkml]   [2001]   [Nov]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: bttv module intialization takes much time on kernel-2.4.x
Date
Tetsuji Rai wrote:
> Title says it all. I use bttv module. When invoking "modprobe bttv" it
> takes several minutes to initialize. When I used kernel-2.2.x it was very
> quick, but with kernel-2.4.x it takes a while. But after that, it works
> fine.
> I don't know why. Any solutions??

RTFM?

Documentation/video4linux/bttv/README says:

If bttv takes very long to load (happens sometimes with the cheap
cards which have no tuner), try adding this to your modules.conf:
options i2c-algo-bit bit_test=1

HTH,

Gerd

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:18    [W:0.057 / U:1.228 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site