lkml.org 
[lkml]   [1998]   [Apr]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Printing/parport problem
On Thu, Apr 02, 1998 at 07:19:31AM -0600, Mike Field wrote:
> As of 2.1.91 (up to 2.1.92-2), printing fails
> on my machine. The output on booting shows the
> changes:
>
> 2.1.90 boot:
> parport0: PC-style at 0x378 [SPP,PS2,ECPPS2]
> parport0: Printer, HEWLETT-PACKARD DESKJET 690C
> Serial driver version 4.24 with no serial options enabled
> ttyS00 at 0x03f8 (irq = 4) is a 16550A
> ttyS01 at 0x02f8 (irq = 3) is a 16550A
> lp0: using parport0 (polling).
>
> /proc/parport/0/hardware
> base: 0x378
> irq: none
> dma: none
> modes: SPP,PS2,ECPPS2
>
> 2.1.92-2 boot:
> parport0: PC-style at 0x378, irq 7, dma 3 [SPP,PS2,ECP,ECPPS2]
> parport0: no ID data returned by device.
> Serial driver version 4.24 with no serial options enabled
> ttyS00 at 0x03f8 (irq = 4) is a 16550A
> ttyS01 at 0x02f8 (irq = 3) is a 16550A
> lp0: using parport0 (interrupt-driven).
>
>
> As the last change in Documentation (parport.txt)
> was in November, it is difficult to figure the cause.
>
> Any suggestions would be appreciated!
>
> Mike Field
>

Me too. I see the same thing here!

-Erik

--
Erik B. Andersen Web: http://www.inconnect.com/~andersen/
email: andersee@debian.org
--This message was written using 73% post-consumer electrons--

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu

\
 
 \ /
  Last update: 2005-03-22 13:42    [W:0.288 / U:0.408 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site