Messages in this thread | | | Date | Thu, 2 Apr 1998 07:19:31 -0600 (CST) | From | Mike Field <> | Subject | Printing/parport problem |
| |
As of 2.1.91 (up to 2.1.92-2), printing fails on my machine. The output on booting shows the changes:
2.1.90 boot: parport0: PC-style at 0x378 [SPP,PS2,ECPPS2] parport0: Printer, HEWLETT-PACKARD DESKJET 690C Serial driver version 4.24 with no serial options enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A lp0: using parport0 (polling).
/proc/parport/0/hardware base: 0x378 irq: none dma: none modes: SPP,PS2,ECPPS2
2.1.92-2 boot: parport0: PC-style at 0x378, irq 7, dma 3 [SPP,PS2,ECP,ECPPS2] parport0: no ID data returned by device. Serial driver version 4.24 with no serial options enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A lp0: using parport0 (interrupt-driven).
As the last change in Documentation (parport.txt) was in November, it is difficult to figure the cause.
Any suggestions would be appreciated!
Mike Field
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu
| |