Messages in this thread | | | Date | Wed, 30 Jul 1997 12:52:15 +0000 (CUT) | From | Rajesh kumar <> | Subject | How to overcome 'Too little memory for virtual resolution 1600 1200'... |
| |
Hi all, I am very new in Linux. I loaded linux version 2.0.0. on a PC-586 with 8MB RAM and 1.2GB disk space.
All the configuration is working fine, except XFree86 X-window. When I start 'xinit' or 'startx', errors come like below.
Since I am very new so not able to find out the problems as well as solution.
As per the available manuals I dumped the 'X -probeonly' file which is included below.
Can Anybody help me out for successful running of 'xinit' or 'startx' Thanks a lot in advance.
The output of X -probeonly : ----------------------------
XFree86 Version 3.1.2 / X Window System (protocol Version 11, revision 0, vendor release 6000) Operating System: Linux Configured drivers: SVGA: server for 8-bit colour SVGA (Patchlevel 0): et4000, et4000w32, et4000w32i, et4000w32p, et3000, pvga1, wd90c00, wd90c10, wd90c30, wd90c24, wd90c31, wd90c33, gvga, vgawonder, tvga8800cs, tvga8900b, tvga8900c, tvga8900cl, tvga9000, clgd5420, clgd5422, clgd5424, clgd5426, clgd5428, clgd5429, clgd5430, clgd5434, clgd5436, clgd6205, clgd6215, clgd6225, clgd6235, ncr77c22, ncr77c22e, cpq_avga, oti067, oti077, oti087, mx, al2101, ali2228, ali2301, ali2302, ali2308, ali2401, cl6410, cl6412, cl6420, cl6440, video7, ct65520, ct65530, ct65540, ct65545, ark1000vl, ark1000pv, ark2000pv, realtek, generic (using VT number 7)
XF86Config: /etc/XF86Config (**) stands for supplied, (--) stands for probed/default values (**) Mouse: type: Microsoft, device: /dev/mouse, baudrate: 1200, 3 button emulation (timeout: 50ms) (**) SVGA: Graphics device ID: "Cirrus Logic GD543x" (**) SVGA: Monitor ID: "My Monitor" (--) SVGA: Mode "1024x768" needs hsync freq of 56.48 kHz. Deleted. (--) SVGA: Mode "1280x1024" needs hsync freq of 51.02 kHz. Deleted. (--) SVGA: Mode "1024x768" needs hsync freq of 62.50 kHz. Deleted. (--) SVGA: Mode "1280x1024" needs hsync freq of 64.25 kHz. Deleted. (--) SVGA: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted. (--) SVGA: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted. (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/" (--) SVGA: chipset: generic (--) SVGA: videoram: 64k (**) SVGA: clocks: 25.18 SVGA: Too little memory for virtual resolution 1600 1200
*** A configured device found, but display modes could not be resolved.***
-------------------------------------------------------------------------- Good Luck! Rajesh
email:rajesh@isac.ernet.in
--------------------------------------------------------------------------
| |