lkml.org 
[lkml]   [2024]   [Apr]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 09/34] power: rt9455: hide unused rt9455_boost_voltage_values
Date
From: Arnd Bergmann <arnd@arndb.de>

The rt9455_boost_voltage_values[] array is only used when USB PHY
support is enabled, causing a W=1 warning otherwise:

drivers/power/supply/rt9455_charger.c:200:18: error: 'rt9455_boost_voltage_values' defined but not used [-Werror=unused-const-variable=]

Enclose the definition in the same #ifdef as the references to it.

Fixes: e86d69dd786e ("power_supply: Add support for Richtek RT9455 battery charger")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
drivers/power/supply/rt9455_charger.c | 2 ++
1 file changed, 2 insertions(+)

diff --git a/drivers/power/supply/rt9455_charger.c b/drivers/power/supply/rt9455_charger.c
index c345a77f9f78..e4dbacd50a43 100644
--- a/drivers/power/supply/rt9455_charger.c
+++ b/drivers/power/supply/rt9455_charger.c
@@ -192,6 +192,7 @@ static const int rt9455_voreg_values[] = {
4450000, 4450000, 4450000, 4450000, 4450000, 4450000, 4450000, 4450000
};

+#if IS_ENABLED(CONFIG_USB_PHY)
/*
* When the charger is in boost mode, REG02[7:2] represent boost output
* voltage.
@@ -207,6 +208,7 @@ static const int rt9455_boost_voltage_values[] = {
5600000, 5600000, 5600000, 5600000, 5600000, 5600000, 5600000, 5600000,
5600000, 5600000, 5600000, 5600000, 5600000, 5600000, 5600000, 5600000,
};
+#endif

/* REG07[3:0] (VMREG) in uV */
static const int rt9455_vmreg_values[] = {
--
2.39.2

\
 
 \ /
  Last update: 2024-05-27 16:20    [W:0.521 / U:0.472 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site