lkml.org 
[lkml]   [2024]   [Apr]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[RFC PATCH v2 1/6] dt-bindings: ROHM BD96801 PMIC regulators
ROHM BD96801 is a highly configurable automotive grade PMIC. Introduce
DT bindings for the BD96801 regulators.

Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
---
Revision history:
- No changes since RFCv1

.../regulator/rohm,bd96801-regulator.yaml | 69 +++++++++++++++++++
1 file changed, 69 insertions(+)
create mode 100644 Documentation/devicetree/bindings/regulator/rohm,bd96801-regulator.yaml

diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd96801-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd96801-regulator.yaml
new file mode 100644
index 000000000000..4015802a3d84
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/rohm,bd96801-regulator.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/rohm,bd96801-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD96801 Power Management Integrated Circuit regulators
+
+maintainers:
+ - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
+
+description: |
+ This module is part of the ROHM BD96801 MFD device. For more details
+ see Documentation/devicetree/bindings/mfd/rohm,bd96801-pmic.yaml.
+
+ The regulator controller is represented as a sub-node of the PMIC node
+ on the device tree.
+
+ Regulator nodes should be named to BUCK_<number> and LDO_<number>.
+ The valid names for BD96801 regulator nodes are
+ BUCK1, BUCK2, BUCK3, BUCK4, LDO5, LDO6, LDO7
+
+patternProperties:
+ "^LDO[5-7]$":
+ type: object
+ description:
+ Properties for single LDO regulator.
+ $ref: regulator.yaml#
+
+ properties:
+ regulator-name:
+ pattern: "^ldo[5-7]$"
+ description:
+ Name of the regulator. Should be "ldo5", ..., "ldo7"
+ rohm,initial-voltage-microvolt:
+ description:
+ Initial voltage for regulator. Voltage can be tuned +/-150 mV from
+ this value. NOTE, This can be modified via I2C only when PMIC is in
+ STBY state.
+ minimum: 300000
+ maximum: 3300000
+
+ "^BUCK[1-4]$":
+ type: object
+ description:
+ Properties for single BUCK regulator.
+ $ref: regulator.yaml#
+
+ properties:
+ regulator-name:
+ pattern: "^buck[1-4]$"
+ description:
+ should be "buck1", ..., "buck4"
+ rohm,initial-voltage-microvolt:
+ description:
+ Initial voltage for regulator. Voltage can be tuned +/-150 mV from
+ this value. NOTE, This can be modified via I2C only when PMIC is in
+ STBY state.
+ minimum: 500000
+ maximum: 3300000
+ rohm,keep-on-stby:
+ description:
+ Keep the regulator powered when PMIC transitions to STBY state.
+ type: boolean
+
+ required:
+ - regulator-name
+ additionalProperties: false
+additionalProperties: false
--
2.43.2

--
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND

~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
Simon says - in Latin please.
~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
Thanks to Simon Glass for the translation =]
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2024-04-12 13:21    [W:0.189 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site