Messages in this thread Patch in this message | | | From | Krzysztof Kozlowski <> | Subject | [PATCH 1/5] arm64: dts: qcom: msm8916-thwc-ufi001c: add function to pin config | Date | Fri, 24 Mar 2023 21:22:40 +0100 |
| |
Bindings require pin configuration nodes to have the function, even if it is GPIO:
msm8916-thwc-ufi001c.dtb: pinctrl@1000000: sim-ctrl-default-state: 'oneOf' conditional failed, one must be fixed: 'esim-sel-pins', 'sim-en-pins', 'sim-sel-pins' do not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts b/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts index 8433c9710b1c..978f0abcdf8f 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts @@ -44,18 +44,21 @@ &msmgpio { sim_ctrl_default: sim-ctrl-default-state { esim-sel-pins { pins = "gpio0", "gpio3"; + function = "gpio"; bias-disable; output-low; }; sim-en-pins { pins = "gpio1"; + function = "gpio"; bias-disable; output-low; }; sim-sel-pins { pins = "gpio2"; + function = "gpio"; bias-disable; output-high; }; -- 2.34.1
| |