lkml.org 
[lkml]   [2023]   [Jan]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] arm64: dts: qcom: sc8280xp: Vote for CX in USB controllers
Date
Running GCC_USB30_*_MASTER_CLK at 200MHz requires CX at nominal level,
not doing so results in occasional lockups. This was previously hidden
by the fact that the display stack incorrectly voted for CX (instead of
MMCX).

Fixes: 152d1faf1e2f ("arm64: dts: qcom: add SC8280XP platform")
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
---
arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 2 ++
1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
index 2ed17baf50d3..4f4353f84cba 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -2265,6 +2265,7 @@ usb_0: usb@a6f8800 {
"ss_phy_irq";

power-domains = <&gcc USB30_PRIM_GDSC>;
+ required-opps = <&rpmhpd_opp_nom>;

resets = <&gcc GCC_USB30_PRIM_BCR>;

@@ -2319,6 +2320,7 @@ usb_1: usb@a8f8800 {
"ss_phy_irq";

power-domains = <&gcc USB30_SEC_GDSC>;
+ required-opps = <&rpmhpd_opp_nom>;

resets = <&gcc GCC_USB30_SEC_BCR>;

--
2.37.3
\
 
 \ /
  Last update: 2023-03-26 23:37    [W:1.372 / U:0.260 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site