[lkml]   [2017]   [Sep]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v2 0/2] [DTS] Enable hardware for Nanopi M1 & Nanopi M1 Plus
From: Philipp Rossak <>

This is v2 of my Enable hardware for Nanopi M1 & Nanopi M1 Plus Patchseries.

Changes since v1:

- removed pincrtl node from power sequence

- removed vqmmc-supply

- changed ap6212 label to sdio_wifi

- removed vqmmc-supply & pincrtl node for powersequence on Bananapi M2 Plus

- Droped patches for the IR controller & UART that are allready queued for 4.15

- Droped dwmac-sun8i patches

Original cover letter from v1:

This Patchseries enables the IR controller and the dwmac-sun8i
on the Friendlyarm Nanopi M1 and Friendlyarm Nanopi M1 Plus boards.
On the Nanopi M1 Plus additionally the BT/Wifi module is activated.

Philipp Rossak (2):
ARM: dts: sun8i: h3: Enable AP6212 WiFi on mmc1 on Nanopi M1 Plus
ARM: dts: sun8i: h3: Improved Wifi bindings on Bananapi M2 Plus

arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts | 7 -------
arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts | 25 +++++++++++++++++++++++++
2 files changed, 25 insertions(+), 7 deletions(-)


 \ /
  Last update: 2017-09-01 18:31    [W:0.074 / U:0.776 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site