lkml.org 
[lkml]   [2017]   [Mar]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC PATCH 6/6] x86/apic: Remove the apic_virture_wire_mode_setup()
Date
Currently, enable and setup the interrupt mode has been advanced
and has already included the virtual wire mode.

Remove the apic_virture_wire_mode_setup() which works for the
virtual wire mode originally.

Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
---
arch/x86/include/asm/apic.h | 2 --
arch/x86/kernel/apic/apic.c | 51 +--------------------------------------------
arch/x86/kernel/irqinit.c | 2 --
3 files changed, 1 insertion(+), 54 deletions(-)

diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index fb06fe5..a9f73f4 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -129,7 +129,6 @@ extern void disconnect_bsp_APIC(int virt_wire_setup);
extern void disable_local_APIC(void);
extern void lapic_shutdown(void);
extern void sync_Arb_IDs(void);
-extern void apic_virture_wire_mode_setup(void);
extern void init_bsp_APIC(void);
extern void setup_local_APIC(void);
extern void init_apic_mappings(void);
@@ -174,7 +173,6 @@ static inline void disable_local_APIC(void) { }
# define setup_boot_APIC_clock x86_init_noop
# define setup_secondary_APIC_clock x86_init_noop
static inline void lapic_update_tsc_freq(void) { }
-static inline void apic_virture_wire_mode_setup(void) {}
static inline void init_bsp_APIC(void) {}

#endif /* !CONFIG_X86_LOCAL_APIC */
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index c93c33d..06d87fd 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -1245,55 +1245,6 @@ static int __init apic_bsp_mode_check(int *upmode)
#endif
}

-/*
- * Setup the through-local-APIC virtual wire mode.
- */
-void apic_virture_wire_mode_setup(void)
-{
- unsigned int value;
-
- /*
- * Don't do the setup now if we have a SMP BIOS as the
- * through-I/O-APIC virtual wire mode might be active.
- */
- if (smp_found_config || !boot_cpu_has(X86_FEATURE_APIC))
- return;
-
- /*
- * Do not trust the local APIC being empty at bootup.
- */
- clear_local_APIC();
-
- /*
- * Enable APIC.
- */
- value = apic_read(APIC_SPIV);
- value &= ~APIC_VECTOR_MASK;
- value |= APIC_SPIV_APIC_ENABLED;
-
-#ifdef CONFIG_X86_32
- /* This bit is reserved on P4/Xeon and should be cleared */
- if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) &&
- (boot_cpu_data.x86 == 15))
- value &= ~APIC_SPIV_FOCUS_DISABLED;
- else
-#endif
- value |= APIC_SPIV_FOCUS_DISABLED;
- value |= SPURIOUS_APIC_VECTOR;
- apic_write(APIC_SPIV, value);
-
- /*
- * Set up the virtual wire mode.
- */
- apic_write(APIC_LVT0, APIC_DM_EXTINT);
- value = APIC_DM_NMI;
- if (!lapic_is_integrated()) /* 82489DX */
- value |= APIC_LVT_LEVEL_TRIGGER;
- if (apic_extnmi == APIC_EXTNMI_NONE)
- value |= APIC_LVT_MASKED;
- apic_write(APIC_LVT1, value);
-}
-
/* init the interrupt routing model for the BSP */
void __init init_bsp_APIC(void)
{
@@ -1306,7 +1257,7 @@ void __init init_bsp_APIC(void)
return;
case APIC_BSP_MODEL_VIRTUAL_WIRE:
pr_info("switch to virtual wire model.\n");
- return;
+ break;
case APIC_BSP_MODEL_SYMMETRIC_IO:
pr_info("switch to symmectic I/O model.\n");
default_setup_apic_routing();
diff --git a/arch/x86/kernel/irqinit.c b/arch/x86/kernel/irqinit.c
index f30fb16..dc2deca 100644
--- a/arch/x86/kernel/irqinit.c
+++ b/arch/x86/kernel/irqinit.c
@@ -72,8 +72,6 @@ void __init init_ISA_irqs(void)
struct irq_chip *chip = legacy_pic->chip;
int i;

- apic_virture_wire_mode_setup();
-
legacy_pic->init(0);

for (i = 0; i < nr_legacy_irqs(); i++)
--
2.5.5


\
 
 \ /
  Last update: 2017-03-29 16:57    [W:1.302 / U:0.912 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site