lkml.org 
[lkml]   [2017]   [Oct]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] nvmem: imx-ocotp: read uniq CPU ID and export as system serial number
Date
The uniq ID is usually exported as ATAG_SERIAL but in case of
devicetrees, this information is not passed.

The uniq ID is stored in OCOTP memory (bank 0, Word 1,2) on imx CPUs.
Read the ID and set as system serial number.

This function is activated by setting `read-system-serial`
dt property for the imx-ocotp node.

Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
---

Comment:
I'm not sure if this functionality really should be in a device driver.
Maybe it should be in arch/arm/mach-imx/. However, it's not
completely wrong so I give it a shot.

.../devicetree/bindings/nvmem/imx-ocotp.txt | 1 +
drivers/nvmem/imx-ocotp.c | 38 ++++++++++++++++++++++
2 files changed, 39 insertions(+)

diff --git a/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt b/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt
index 70d791b03ea1..bf0cc9e5e50f 100644
--- a/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt
+++ b/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt
@@ -16,6 +16,7 @@ Required properties:

Optional properties:
- read-only: disable write access
+- read-system-serial: read uniq ID and export as system serial number. Available in /proc/cpuinfo

Example:

diff --git a/drivers/nvmem/imx-ocotp.c b/drivers/nvmem/imx-ocotp.c
index 193ca8fd350a..574cab017611 100644
--- a/drivers/nvmem/imx-ocotp.c
+++ b/drivers/nvmem/imx-ocotp.c
@@ -28,10 +28,16 @@
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/delay.h>
+#include <asm/system_info.h>

#define IMX_OCOTP_OFFSET_B0W0 0x400 /* Offset from base address of the
* OTP Bank0 Word0
*/
+
+/* Uniq ID used for Serial number */
+#define IMX_OCOTP_OFFSET_UID_LOW (IMX_OCOTP_OFFSET_B0W0 + 0x10)
+#define IMX_OCOTP_OFFSET_UID_HIGH (IMX_OCOTP_OFFSET_B0W0 + 0x20)
+
#define IMX_OCOTP_OFFSET_PER_WORD 0x10 /* Offset between the start addr
* of two consecutive OTP words.
*/
@@ -298,6 +304,34 @@ static int imx_ocotp_write(void *context, unsigned int offset, void *val,
return bytes;
}

+static int imx_ocotp_setserial(struct ocotp_priv *priv)
+{
+ int ret;
+
+ mutex_lock(&ocotp_mutex);
+
+ ret = clk_prepare_enable(priv->clk);
+ if (ret < 0) {
+ mutex_unlock(&ocotp_mutex);
+ dev_err(priv->dev, "failed to prepare/enable ocotp clk\n");
+ return ret;
+ }
+
+ ret = imx_ocotp_wait_for_busy(priv->base, 0);
+ if (ret < 0) {
+ dev_err(priv->dev, "timeout during read setup\n");
+ goto out;
+ }
+
+ system_serial_low = readl(priv->base + IMX_OCOTP_OFFSET_UID_LOW);
+ system_serial_high = readl(priv->base + IMX_OCOTP_OFFSET_UID_HIGH);
+
+out:
+ clk_disable_unprepare(priv->clk);
+ mutex_unlock(&ocotp_mutex);
+ return ret;
+}
+
static struct nvmem_config imx_ocotp_nvmem_config = {
.name = "imx-ocotp",
.read_only = false,
@@ -352,6 +386,10 @@ static int imx_ocotp_probe(struct platform_device *pdev)
if (IS_ERR(nvmem))
return PTR_ERR(nvmem);

+ if (of_property_read_bool(pdev->dev.of_node, "read-system-serial")) {
+ if (!imx_ocotp_setserial(priv))
+ dev_warn(&pdev->dev, "Could not read CPU uniq serial number");
+ }
platform_set_drvdata(pdev, nvmem);

return 0;
--
2.13.1
\
 
 \ /
  Last update: 2017-10-04 17:16    [W:0.059 / U:0.264 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site