lkml.org 
[lkml]   [2017]   [Jan]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[RFC PATCH 00/33] irqchip: Core support for GICv4
Date
This series implements the core support for GICv4. And despite its
size, it does exactly *nothing*. What it adds is an infrastructure
that a hypervisor (KVM) can use to route VLPIs to a guest.

From the bit of documentation that is in patch #32:

WARNING: The blurb below assumes that you understand the
intricacies of GICv3, GICv4, and how a guest's view of a GICv3 gets
translated into GICv4 commands. So it effectively targets at most
two individuals. You know who you are.

The core GICv4 code is designed to *avoid* exposing too much of the
core GIC code (that would in turn leak into the hypervisor code),
and instead provide a hypervisor agnostic interface to the HW (of
course, the astute reader will quickly realize that hypervisor
agnostic actually means KVM-specific - what were you thinking?).

In order to achieve a modicum of isolation, we try to hide most of
the GICv4 "stuff" behind normal irqchip operations:

- Any guest-visible VLPI is backed by a Linux interrupt (and a
physical LPI which gets deconfigured when the guest maps the
VLPI). This allows the same DevID/Event pair to be either mapped
to the LPI (host) or the VLPI (guest).

- Enabling/disabling a VLPI is done by issuing mask/unmask calls.

- Guest INT/CLEAR commands are implemented through
irq_set_irqchip_state().

- The *bizarre* stuff (mapping/unmapping an interrupt to a VLPI, or
issuing an INV after changing a priority) gets shoved into the
irq_set_vcpu_affinity() method. While this is quite horrible
(let's face it, this is the irqchip version of an ioctl), it
confines the crap to a single location. And map/unmap really is
about setting the affinity of a VLPI to a vcpu, so only INV is
majorly out of place. So there.

But handling VLPIs is only one side of the job of the GICv4
code. The other (darker) side is to take care of the doorbell
interrupts which are delivered when a VLPI targeting a non-running
vcpu is being made pending.

The choice made here is that each vcpu (VPE in old northern GICv4
dialect) gets a single doorbell, no matter how many interrupts are
targeting it. This has a nice property, which is that the interrupt
becomes a handle for the VPE, and that the hypervisor code can
manipulate it through the normal interrupt API:

- VMs (or rather the VM abstraction that matters to the GIC)
contain an irq domain where each interrupt maps to a VPE. In
turn, this domain sits on top of the normal LPI allocator, and a
specially crafted irq_chip implementation.

- mask/unmask do what is expected on the doorbell interrupt.

- irq_set_affinity is used to move a VPE from one redistributor to
another.

- irq_set_vcpu_affinity once again gets hijacked for the purpose of
creating a new sub-API, namely scheduling/descheduling a VPE and
performing INVALL operations.


I'm posting these patches separately from the rest of the KVM work
because:

- they are complicated enough already
- I want to keep the interface as clean as possible
- the KVM device assignment is still in a state of flux

Patches on top of v4.10-rc3.

Marc Zyngier (33):
irqchip/gic-v3: Add redistributor iterator
irqchip/gic-v3: Add VLPI/DirectLPI discovery
irqchip/gic-v3-its: Refactor command encoding
irqchip/gic-v3-its: Move LPI definitions around
irqchip/gic-v3-its: Zero command on allocation
irqchip/gic-v3-its: Add probing for VLPI properties
irqchip/gic-v3-its: Macro-ize its_send_single_command
irqchip/gic-v3-its: Implement irq_set_irqchip_state for pending state
irqchip/gic-v3-its: Split out property table allocation
irqchip/gic-v4-its: Allow use of indirect VCPU tables
irqchip/gic-v3-its: Split out pending table allocation
irqchip/gic-v3-its: Rework LPI freeing
irqchip/gic-v3-its: Generalize device table allocation
irqchip/gic-v3-its: Generalize LPI configuration
irqchip/gic-v4: Add management structure definitions
irqchip/gic-v3-its: Add GICv4 ITS command definitions
irqchip/gic-v3-its: Add VLPI configuration hook
irqchip/gic-v3-its: Add VLPI map/unmap operations
irqchip/gic-v3-its: Add VLPI configuration handling
irqchip/gic-v3-its: Add VPE domain infrastructure
irqchip/gic-v3-its: Add VPE irq domain allocation/teardown
irqchip/gic-v3-its: Add VPE irq domain [de]activation
irqchip/gic-v3-its: Add VPENDBASER/VPROPBASER accessors
irqchip/gic-v3-its: Add VPE scheduling
irqchip/gic-v3-its: Add VPE invalidation hook
irqchip/gic-v3-its: Add VPE affinity changes
irqchip/gic-v3-its: Add VPE interrupt masking
irqchip/gic-v3-its: Support VPE doorbell invalidation even when
!DirectLPI
irqchip/gic-v4: Add per-VM VPE domain creation
irqchip/gic-v4: Add VPE command interface
irqchip/gic-v4: Add VLPI configuration interface
irqchip/gic-v4: Add some basic documentation
irqchip/gic-v4: Enable low-level GICv4 operations

arch/arm/include/asm/arch_gicv3.h | 28 +
arch/arm64/include/asm/arch_gicv3.h | 5 +
drivers/irqchip/Makefile | 2 +-
drivers/irqchip/irq-gic-v3-its.c | 1183 +++++++++++++++++++++++++++++++----
drivers/irqchip/irq-gic-v3.c | 99 ++-
drivers/irqchip/irq-gic-v4.c | 241 +++++++
include/linux/irqchip/arm-gic-v3.h | 82 +++
include/linux/irqchip/arm-gic-v4.h | 102 +++
8 files changed, 1602 insertions(+), 140 deletions(-)
create mode 100644 drivers/irqchip/irq-gic-v4.c
create mode 100644 include/linux/irqchip/arm-gic-v4.h

--
2.1.4

\
 
 \ /
  Last update: 2017-01-17 11:21    [W:1.206 / U:0.208 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site