lkml.org 
[lkml]   [2016]   [Sep]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] drm/fsl-dcu: fix endian issue when using clk_register_divider
Date
Since using clk_register_divider to setup the pixel clock, regmap
is no longer used. Regmap did take care of DCU using different
endianness. Check endianness using the device-tree property
"big-endian" to determine the location of DIV_RATIO.

Cc: stable@vger.kernel.org
Fixes: 2d701449bce1 ("drm/fsl-dcu: use common clock framework for pixel clock divider")
Reported-by: Meng Yi <meng.yi@nxp.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
---
drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c
index 7882387..8dd042e 100644
--- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c
+++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c
@@ -330,6 +330,7 @@ static int fsl_dcu_drm_probe(struct platform_device *pdev)
const char *pix_clk_in_name;
const struct of_device_id *id;
int ret;
+ u8 div_ratio_shift = 0;

fsl_dev = devm_kzalloc(dev, sizeof(*fsl_dev), GFP_KERNEL);
if (!fsl_dev)
@@ -382,11 +383,15 @@ static int fsl_dcu_drm_probe(struct platform_device *pdev)
pix_clk_in = fsl_dev->clk;
}

+ if (of_property_read_bool(dev->of_node, "big-endian"))
+ div_ratio_shift = 24;
+
+
pix_clk_in_name = __clk_get_name(pix_clk_in);
snprintf(pix_clk_name, sizeof(pix_clk_name), "%s_pix", pix_clk_in_name);
fsl_dev->pix_clk = clk_register_divider(dev, pix_clk_name,
pix_clk_in_name, 0, base + DCU_DIV_RATIO,
- 0, 8, CLK_DIVIDER_ROUND_CLOSEST, NULL);
+ div_ratio_shift, 8, CLK_DIVIDER_ROUND_CLOSEST, NULL);
if (IS_ERR(fsl_dev->pix_clk)) {
dev_err(dev, "failed to register pix clk\n");
ret = PTR_ERR(fsl_dev->pix_clk);
--
2.9.0
\
 
 \ /
  Last update: 2016-09-17 09:58    [W:0.390 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site