lkml.org 
[lkml]   [2015]   [Sep]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH-v2 0/7] mmc: sdhci-pxav3: Enable support for PXA1928 SDCHI controller
Date
PXA1928 SDHCI controller has few differences, for example,

PXAxxx PXA1928
====== =======
SDCLK_DELAY field 0x10A 0x114
SDCLK_DELAY mask 0x1F 0x3FF
SDCLK_DELAY shift 9 8
SDCLK_SEL shift 8 2 (SEL1)

So this patch series introduces new compatible device_id
(marvell,pxav3-1928-sdhci), and makes use of .data for handling
such differences.

The series also adds support like,

- independent ->set_clock() api, as we need to enable internal clock gate
and TX clock
- pinctrl configuration based on bus speed.
- introduce new quirk SDHCI_QUIRK2_MUST_SET_SDHCI_BUS_POWER
SD_BUS_POWER & SD_BUS_VLT bit-fields are used internally to gate the
clocks, so it is important to configure them as part of ->set_power()
More detailed description is written into commit log.
- Enable SDHCI_QUIRK_BROKEN_TIMEOUT_VAL for PXA1928 device_id
- Enable SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON quirk for pxa1928 device


V1 => V2:
=========
- Fixed typo issue (residual change remained by mistake)
- Added new patch updating DT binding document for pxa1928 support
- Added new patch enabling CARD_ON_NEEDS_BUS_ON for pxa1928 device

Testing:
I have done basic testing on both eMMC and SD card on PXA1928 based
platform.

Note: I tried to made sure that I do not break any other platform, which
used sdhci, except HS200 configuration.·
Unfortunately I do not have access to any other datasheets, where I can
cross check the details on HS200 bit-fields. Probably someone who has
access can confirm [PATCH 4/5], whether it impacts other platforms.

Kevin Liu (1):
mmc: sdhci-pxav3: Fix HS200 mode support

Vaibhav Hiremath (6):
mmc: sdhci-pxav3: Enable pxa1928 device support
mmc: sdhci-pxav3: binding: Add pxa1928 compatible support
mmc: sdhci-pxav3: Add platform specific set_clock ops
mmc: sdhci-pxav3: Add pinctl setting according to bus clock
mmc: sdhci: add new quirk for setting BUS_POWER & BUS_VLT fields
mmc: sdhci: enable SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON for pxa1928

.../devicetree/bindings/mmc/sdhci-pxa.txt | 2 +-
drivers/mmc/host/sdhci-pltfm.c | 4 +
drivers/mmc/host/sdhci-pxav3.c | 168 +++++++++++++++++++--
drivers/mmc/host/sdhci.c | 3 +-
drivers/mmc/host/sdhci.h | 2 +
5 files changed, 165 insertions(+), 14 deletions(-)

--
1.9.1



\
 
 \ /
  Last update: 2015-09-07 13:41    [W:0.353 / U:0.616 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site