lkml.org 
[lkml]   [2015]   [Sep]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH-v2 5/7] mmc: sdhci-pxav3: Fix HS200 mode support
Date
From: Kevin Liu <kliu5@marvell.com>

IN case of MMC HS200 mode, current code does not enable
SD_CE_ATA_2.MMC_HS200 & SD_CE_ATA_2.MMC_CARD bit configurations.

So this patch updates the above bit fields correctly.

Signed-off-by: Tim Wang <wangtt@marvell.com>
Signed-off-by: Kevin Liu <kliu5@marvell.com>
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
---
Note: Unfortunately I do not have access to any other datasheets
which uses sdhci-pxav3 driver, so quite not sure whether this would
break any existing platform, probably NOT, as I do not see any
references for this change.
If anyone can confirm that would be really great.

drivers/mmc/host/sdhci-pxav3.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)

diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c
index d933f75..6978810 100644
--- a/drivers/mmc/host/sdhci-pxav3.c
+++ b/drivers/mmc/host/sdhci-pxav3.c
@@ -57,6 +57,8 @@
#define SD_CE_ATA_1 0x10C

#define SD_CE_ATA_2 0x10E
+#define SD_CE_ATA2_HS200_EN BIT(10)
+#define SD_CE_ATA2_MMC_MODE BIT(12)
#define SDCE_MISC_INT BIT(2)
#define SDCE_MISC_INT_EN BIT(1)

@@ -330,6 +332,17 @@ static int pxav3_select_pinstate(struct sdhci_host *host, unsigned int uhs)
return pinctrl_select_state(pxa->pinctrl, pinctrl);
}

+static int pxav3_select_hs200(struct sdhci_host *host)
+{
+ u16 reg = 0;
+
+ reg = sdhci_readw(host, SD_CE_ATA_2);
+ reg |= SD_CE_ATA2_HS200_EN | SD_CE_ATA2_MMC_MODE;
+ sdhci_writew(host, reg, SD_CE_ATA_2);
+
+ return 0;
+}
+
static void pxav3_set_uhs_signaling(struct sdhci_host *host, unsigned int uhs)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
@@ -361,6 +374,10 @@ static void pxav3_set_uhs_signaling(struct sdhci_host *host, unsigned int uhs)
case MMC_TIMING_UHS_DDR50:
ctrl_2 |= SDHCI_CTRL_UHS_DDR50 | SDHCI_CTRL_VDD_180;
break;
+ case MMC_TIMING_MMC_HS200:
+ ctrl_2 |= SDHCI_CTRL_UHS_SDR104 | SDHCI_CTRL_VDD_180;
+ pxav3_select_hs200(host);
+ break;
}

/*
--
1.9.1


\
 
 \ /
  Last update: 2015-09-07 13:41    [W:0.155 / U:0.284 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site