lkml.org 
[lkml]   [2015]   [Feb]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
Subjectusb serial: pl2303 driver TxD "break" stays after close() bug
From
Tested on 3.10.67 and 3.18.5 kernels with ATEN UC-232A usb-serial adapter.
No patch, sorry. To actually see the stuck "break" signal on TxD line, you
need either some sort of LED or voltmeter connected to the data transmit
line. Other RS-232 serial ports that I have access to (normal PC hardware
serial ports and FTDI usb-serial adapters) do not have this bug.


/* pl2303 TxD "break" stays after close() demo */

#include <stdio.h>
#include <unistd.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <sys/ioctl.h>
#include <termios.h>
#include <fcntl.h>
#include <stdlib.h>

int main(int argc, char **argv)
{
struct termios tt;
int fd;

if(argc < 2) {
fprintf(stderr, "usage: %s /dev/ttyUSB0\n", argv[0]);
exit(1);
}
if((fd = open(argv[1], O_RDWR | O_NOCTTY, 0)) == -1) {
perror("serial port open failed");
exit(1);
}
tcgetattr(fd, &tt);
cfmakeraw(&tt);
tcsetattr(fd, TCSANOW, &tt);
if(ioctl(fd, TIOCSBRK, 0) == -1) {
perror("set BRK failed");
exit(1);
}
close(fd);
exit(0);
}

--
Jari Ruusu 4096R/8132F189 12D6 4C3A DCDA 0AA4 27BD ACDF F073 3C80 8132 F189


\
 
 \ /
  Last update: 2015-02-05 12:21    [W:0.033 / U:1.768 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site