lkml.org 
[lkml]   [2015]   [Feb]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: usb serial: pl2303 driver TxD "break" stays after close() bug
On Thu, Feb 19, 2015 at 03:38:39PM +0200, Jari Ruusu wrote:
> On 2/19/15, Johan Hovold <johan@kernel.org> wrote:
> > What happens when you reopen the port? Is the break state cleared then?
>
> Stuck "break" signal is not cleared on re-open.
>
> To clear it, you need to poke it with ioctl(fd, TIOCCBRK, 0)
> or disconnect the device.

That's definitely a bug.

Care to test the patch below?

Thanks,
Johan


From ee3f2d35adc59822d72f3908078da7f361c26577 Mon Sep 17 00:00:00 2001
From: Johan Hovold <johan@kernel.org>
Date: Fri, 20 Feb 2015 10:05:51 +0700
Subject: [PATCH] USB: pl2303: disable break on shutdown

Currently an enabled break state is not disabled on final close nor on
re-open and has to be disabled manually.

Fix this by disabling break on port shutdown.

Reported-by: Jari Ruusu <jariruusu@users.sourceforge.net>
Signed-off-by: Johan Hovold <johan@kernel.org>
---
drivers/usb/serial/pl2303.c | 18 +++++++++++++-----
1 file changed, 13 insertions(+), 5 deletions(-)

diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 0f872e6b2c87..f6fe4737185d 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -132,6 +132,7 @@ MODULE_DEVICE_TABLE(usb, id_table);
#define UART_OVERRUN_ERROR 0x40
#define UART_CTS 0x80

+static void pl2303_set_break(struct usb_serial_port *port, bool enable);

enum pl2303_type {
TYPE_01, /* Type 0 and 1 (difference unknown) */
@@ -613,6 +614,7 @@ static void pl2303_dtr_rts(struct usb_serial_port *port, int on)

static void pl2303_close(struct usb_serial_port *port)
{
+ pl2303_set_break(port, false);
usb_serial_generic_close(port);
usb_kill_urb(port->interrupt_in_urb);
}
@@ -741,17 +743,16 @@ static int pl2303_ioctl(struct tty_struct *tty,
return -ENOIOCTLCMD;
}

-static void pl2303_break_ctl(struct tty_struct *tty, int break_state)
+static void pl2303_set_break(struct usb_serial_port *port, bool enable)
{
- struct usb_serial_port *port = tty->driver_data;
struct usb_serial *serial = port->serial;
u16 state;
int result;

- if (break_state == 0)
- state = BREAK_OFF;
- else
+ if (enable)
state = BREAK_ON;
+ else
+ state = BREAK_OFF;

dev_dbg(&port->dev, "%s - turning break %s\n", __func__,
state == BREAK_OFF ? "off" : "on");
@@ -763,6 +764,13 @@ static void pl2303_break_ctl(struct tty_struct *tty, int break_state)
dev_err(&port->dev, "error sending break = %d\n", result);
}

+static void pl2303_break_ctl(struct tty_struct *tty, int state)
+{
+ struct usb_serial_port *port = tty->driver_data;
+
+ pl2303_set_break(port, state);
+}
+
static void pl2303_update_line_status(struct usb_serial_port *port,
unsigned char *data,
unsigned int actual_length)
--
2.0.5


\
 
 \ /
  Last update: 2015-02-20 04:41    [W:0.067 / U:0.392 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site