lkml.org 
[lkml]   [2015]   [Oct]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH RFC V2 3/3] Input: goodix - update dt bindings documentation (axis swapping/inversion)
Date


> -----Original Message-----
> From: linux-input-owner@vger.kernel.org [mailto:linux-input-owner@vger.kernel.org] On Behalf Of Karsten Merker
> Sent: 09 October, 2015 20:56
> To: Bastien Nocera; Dmitry Torokhov; Tirdea, Irina; Aleksei Mamlin; linux-input@vger.kernel.org; Ian Campbell
> Cc: devicetree@vger.kernel.org; linux-kernel@vger.kernel.org; Chen-Yu Tsai; Karsten Merker
> Subject: [PATCH RFC V2 3/3] Input: goodix - update dt bindings documentation (axis swapping/inversion)
>
> The goodix touchscreen driver has gained support for the
> optional touchscreen-inverted-x, touchscreen-inverted-y
> and touchscreen-swapped-x-y properties as described in
> Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt.
>
> Document these properties in the goodix bindings description.
>
> Signed-off-by: Karsten Merker <merker@debian.org>

Reviewed-by: Irina Tirdea <irina.tirdea@intel.com>

> ---
> Documentation/devicetree/bindings/input/touchscreen/goodix.txt | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
> b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
> index 4db3393..4ecd0e1 100644
> --- a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
> +++ b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
> @@ -14,6 +14,7 @@ Required properties:
> - interrupts : Interrupt to which the chip is connected
> - irq-gpio : GPIO pin used for IRQ
> - reset-gpio : GPIO pin used for reset
> +
> Optional properties:
>
> - esd-recovery-timeout-ms : ESD poll time (in milli seconds) for the driver to
> @@ -21,6 +22,11 @@ Optional properties:
> device. ESD is disabled if this property is not set
> or is set to 0.
>
> + - touchscreen-inverted-x : X axis is inverted (boolean)
> + - touchscreen-inverted-y : Y axis is inverted (boolean)
> + - touchscreen-swapped-x-y : X and Y axis are swapped (boolean)
> + (swapping is done after inverting the axis)
> +
> Example:
>
> i2c@00000000 {
> --
> 2.1.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-input" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html


\
 
 \ /
  Last update: 2015-10-13 09:21    [W:0.097 / U:0.180 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site