lkml.org 
[lkml]   [2015]   [Oct]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH RFC V2 1/3] Input: goodix - add dt axis swapping and axis inversion support
Date
Implement support for the following device-tree properties
in the goodix touchscreen driver:

- touchscreen-inverted-x: X axis is inverted (boolean)
- touchscreen-inverted-y: Y axis is inverted (boolean)
- touchscreen-swapped-x-y: X and Y axis are swapped (boolean)

These are necessary on tablets which have a display in portrait
format while the touchscreen is in landscape format, such as e.g.
the MSI Primo 81.

Signed-off-by: Karsten Merker <merker@debian.org>
---
drivers/input/touchscreen/goodix.c | 27 +++++++++++++++++++++++++++
1 file changed, 27 insertions(+)

diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c
index 22bfc4b..a05bdad 100644
--- a/drivers/input/touchscreen/goodix.c
+++ b/drivers/input/touchscreen/goodix.c
@@ -2,6 +2,7 @@
* Driver for Goodix Touchscreens
*
* Copyright (c) 2014 Red Hat Inc.
+ * Copyright (c) 2015 K. Merker <merker@debian.org>
*
* This code is based on gt9xx.c authored by andrew@goodix.com:
*
@@ -53,6 +54,9 @@ struct goodix_ts_data {
atomic_t open_count;
/* Protects power management calls and access to suspended flag */
struct mutex mutex;
+ bool swapped_x_y;
+ bool inverted_x;
+ bool inverted_y;
};

#define GOODIX_GPIO_INT_NAME "irq"
@@ -271,6 +275,14 @@ static void goodix_ts_report_touch(struct goodix_ts_data *ts, u8 *coor_data)
input_y = ts->abs_y_max - input_y;
}

+ /* Inversions have to happen before axis swapping */
+ if (ts->inverted_x)
+ input_x = ts->abs_x_max - input_x;
+ if (ts->inverted_y)
+ input_y = ts->abs_y_max - input_y;
+ if (ts->swapped_x_y)
+ swap(input_x, input_y);
+
input_mt_slot(ts->input_dev, id);
input_mt_report_slot_state(ts->input_dev, MT_TOOL_FINGER, true);
input_report_abs(ts->input_dev, ABS_MT_POSITION_X, input_x);
@@ -666,6 +678,8 @@ static void goodix_read_config(struct goodix_ts_data *ts)
error);
ts->abs_x_max = GOODIX_MAX_WIDTH;
ts->abs_y_max = GOODIX_MAX_HEIGHT;
+ if (ts->swapped_x_y)
+ swap(ts->abs_x_max, ts->abs_y_max);
ts->int_trigger_type = GOODIX_INT_TRIGGER;
ts->max_touch_num = GOODIX_MAX_CONTACTS;
return;
@@ -673,6 +687,8 @@ static void goodix_read_config(struct goodix_ts_data *ts)

ts->abs_x_max = get_unaligned_le16(&config[RESOLUTION_LOC]);
ts->abs_y_max = get_unaligned_le16(&config[RESOLUTION_LOC + 2]);
+ if (ts->swapped_x_y)
+ swap(ts->abs_x_max, ts->abs_y_max);
ts->int_trigger_type = config[TRIGGER_LOC] & 0x03;
ts->max_touch_num = config[MAX_CONTACTS_LOC] & 0x0f;
if (!ts->abs_x_max || !ts->abs_y_max || !ts->max_touch_num) {
@@ -680,6 +696,8 @@ static void goodix_read_config(struct goodix_ts_data *ts)
"Invalid config, using defaults\n");
ts->abs_x_max = GOODIX_MAX_WIDTH;
ts->abs_y_max = GOODIX_MAX_HEIGHT;
+ if (ts->swapped_x_y)
+ swap(ts->abs_x_max, ts->abs_y_max);
ts->max_touch_num = GOODIX_MAX_CONTACTS;
}

@@ -950,6 +968,15 @@ static int goodix_ts_probe(struct i2c_client *client,
return 0;
}

+#ifdef CONFIG_OF
+ ts->swapped_x_y = of_property_read_bool(client->dev.of_node,
+ "touchscreen-swapped-x-y");
+ ts->inverted_x = of_property_read_bool(client->dev.of_node,
+ "touchscreen-inverted-x");
+ ts->inverted_y = of_property_read_bool(client->dev.of_node,
+ "touchscreen-inverted-y");
+#endif
+
return goodix_configure_dev(ts);

err_free_cfg_name:
--
2.1.4


\
 
 \ /
  Last update: 2015-10-09 20:21    [W:0.327 / U:1.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site