lkml.org 
[lkml]   [2014]   [Sep]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 1/2] iio: vadc: Qualcomm SPMI PMIC voltage ADC driver
Hi Ivan,

On 09/25/2014 03:47 PM, Ivan T. Ivanov wrote:
>
> Hi Stan, few comment bellow.
>
> On Wed, 2014-09-24 at 15:56 +0300, Stanimir Varbanov wrote:
>> The voltage ADC is peripheral of Qualcomm SPMI PMIC chips. It has
>> 15bits resolution and register space inside PMIC accessible across
>> SPMI bus.
>>
>> The vadc driver registers itself through IIO interface.
>>
>> Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com>
>> Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com>
>> ---
>> drivers/iio/adc/Kconfig | 10 +
>> drivers/iio/adc/Makefile | 1 +
>> drivers/iio/adc/qcom-spmi-vadc.c | 1029 +++++++++++++++++++++++++
>> include/dt-bindings/iio/qcom,spmi-pmic-vadc.h | 119 +++
>> 4 files changed, 1159 insertions(+), 0 deletions(-)
>> create mode 100644 drivers/iio/adc/qcom-spmi-vadc.c
>> create mode 100644 include/dt-bindings/iio/qcom,spmi-pmic-vadc.h
>>
>> diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
>> index 11b048a..ec48360 100644
>> --- a/drivers/iio/adc/Kconfig
>> +++ b/drivers/iio/adc/Kconfig
>> @@ -206,6 +206,16 @@ config NAU7802
>> To compile this driver as a module, choose M here: the
>> module will be called nau7802.
>>
>> +config QCOM_SPMI_VADC
>> + tristate "Qualcomm SPMI PMIC voltage ADC"
>> + depends on SPMI
>
> + select REGMAP_SPMI

I'd suggest MFD_SPMI_PMIC symbol of the parent driver instead? The
parent MFD PMIC driver already selects REGMAP_SPMI and depends on SPMI.

>
> <snip>
>
>> +
>> +static int vadc_read(struct vadc_priv *vadc, u16 offset, u8 *data)
>> +{
>> + return regmap_bulk_read(vadc->regmap, vadc->base + offset, data, 1);
>
> just regmap_read() ?

No, regmap_read() expects unsigned int *val as an argument hence I will
need temporary variable. I had a comment to rework this on the first
version of the patchset.

>
>> +}
>> +
>
> General comment, most of the dev_dbg looks like legitimate dev_err's to me.

I've decided to not flood console with messages. If someone wants to
debug why the driver doesn't probed he can define DEBUG.

--
regards,
Stan


\
 
 \ /
  Last update: 2014-09-25 18:01    [W:0.100 / U:0.308 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site