lkml.org 
[lkml]   [2014]   [Oct]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 1/2] iio: vadc: Qualcomm SPMI PMIC voltage ADC driver
From
Date
On Sat, 2014-10-04 at 12:51 +0100, Jonathan Cameron wrote:
> On 02/10/14 13:08, Ivan T. Ivanov wrote:
> > +iio maintainers
> >
> > On Thu, 2014-10-02 at 12:29 +0300, Ivan T. Ivanov wrote:
> >> Hi Stan,
> >>
> >> On 09/24/2014 03:56 PM, Stanimir Varbanov wrote:
> >>
> >> <snip>
> >>
> >>> +static int vadc_get_dt_data(struct vadc_priv *vadc, struct device_node *node)
> >>> +{
> >>> + struct iio_chan_spec *iio_chan = vadc->iio_chans;
> >>> + const struct vadc_channels *vadc_chan;
> >>> + struct vadc_channel_prop prop;
> >>> + struct device_node *child;
> >>> + int ret, index = 0;
> >>> +
> >>> + for_each_available_child_of_node(node, child) {
> >>> + ret = vadc_get_dt_channel_data(vadc->dev, &prop, child);
> >>> + if (ret)
> >>> + return ret;
> >>> +
> >>> + vadc->chan_props[index] = prop;
> >>> +
> >>> + vadc_chan = &vadc_chans[prop.channel];
> >>> +
> >>> + iio_chan->channel = prop.channel;
> >>> + iio_chan->datasheet_name = vadc_chan->datasheet_name;
> >>> + iio_chan->info_mask_separate = vadc_chan->info_mask;
> >>> + iio_chan->type = vadc_chan->type;
> >>> + iio_chan->indexed = 1;
> >>> + iio_chan->scan_type.sign = 's';
> >>> + iio_chan->scan_type.realbits = 15;
> >>> + iio_chan->scan_type.storagebits = 16;
> >>> + iio_chan->address = index++;
> >>> +
> >>> + iio_chan++;
> >>> + }
> >>> +
> >>> + return 0;
> >>> +}
> >>> +
> >>
> >> <snip>
> >>
> >>> +static int vadc_probe(struct platform_device *pdev)
> >>> +{
> >>
> >> <snip>
> >>
> >>> +
> >>> + indio_dev->dev.parent = dev;
> >>> + indio_dev->dev.of_node = node;
> >>> + indio_dev->name = pdev->name;
> >>> + indio_dev->modes = INDIO_DIRECT_MODE;
> >>> + indio_dev->info = &vadc_info;
> >>> + indio_dev->channels = vadc->iio_chans;
> >>> + indio_dev->num_channels = vadc->nchannels;
> >>
> >> This will not work as we thought. Registration will be fine and entries
> >> in sysfs are created as expected, but this is breaking numbering scheme
> >> for client drivers. For us the problem is that iio framework expect channels
> >> numbering to be linear and channel number should not be greater than
> >> channel count. For example even if die temperature channel is always 8, if
> >> I describe only 5 channels in DTS files (4 for reference points measurement)
> >> and 1 for die temperature, clients could not get OF reference to
> >> temperature
> >> channel using io-channels = <&pm8941_vadc 8>;
> >>
> >> Jonathan, please, could you advise us.
> I'd like to let the solution you proposed sit on the list a little longer.
> It seems fairly sensible, but lets see what others suggest.

Sure.

Thank you.
Ivan




\
 
 \ /
  Last update: 2014-10-07 14:41    [W:0.082 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site