lkml.org 
[lkml]   [2014]   [Sep]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 1/2] iio: vadc: Qualcomm SPMI PMIC voltage ADC driver
From
Date
On Thu, 2014-09-25 at 18:30 +0300, Stanimir Varbanov wrote:
> Hi Ivan,
>
> On 09/25/2014 03:47 PM, Ivan T. Ivanov wrote:
> >
> > Hi Stan, few comment bellow.
> >
> > On Wed, 2014-09-24 at 15:56 +0300, Stanimir Varbanov wrote:
> >> The voltage ADC is peripheral of Qualcomm SPMI PMIC chips. It has
> >> 15bits resolution and register space inside PMIC accessible across
> >> SPMI bus.
> >>
> >> The vadc driver registers itself through IIO interface.
> >>
> >> Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com>
> >> Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com>
> >> ---
> >> drivers/iio/adc/Kconfig | 10 +
> >> drivers/iio/adc/Makefile | 1 +
> >> drivers/iio/adc/qcom-spmi-vadc.c | 1029 +++++++++++++++++++++++++
> >> include/dt-bindings/iio/qcom,spmi-pmic-vadc.h | 119 +++
> >> 4 files changed, 1159 insertions(+), 0 deletions(-)
> >> create mode 100644 drivers/iio/adc/qcom-spmi-vadc.c
> >> create mode 100644 include/dt-bindings/iio/qcom,spmi-pmic-vadc.h
> >>
> >> diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
> >> index 11b048a..ec48360 100644
> >> --- a/drivers/iio/adc/Kconfig
> >> +++ b/drivers/iio/adc/Kconfig
> >> @@ -206,6 +206,16 @@ config NAU7802
> >> To compile this driver as a module, choose M here: the
> >> module will be called nau7802.
> >>
> >> +config QCOM_SPMI_VADC
> >> + tristate "Qualcomm SPMI PMIC voltage ADC"
> >> + depends on SPMI
> >
> > + select REGMAP_SPMI
>
> I'd suggest MFD_SPMI_PMIC symbol of the parent driver instead? The
> parent MFD PMIC driver already selects REGMAP_SPMI and depends on SPMI.


+1 for depends on MFD_SPMI_PMIC.

>
> >
> > <snip>
> >
> >> +
> >> +static int vadc_read(struct vadc_priv *vadc, u16 offset, u8 *data)
> >> +{
> >> + return regmap_bulk_read(vadc->regmap, vadc->base + offset, data, 1);
> >
> > just regmap_read() ?
>
> No, regmap_read() expects unsigned int *val as an argument hence I will
> need temporary variable. I had a comment to rework this on the first
> version of the patchset.

Oops, So I should expect the same comment on my IADC driver :-)

>
> >
> >> +}
> >> +
> >
> > General comment, most of the dev_dbg looks like legitimate dev_err's to me.
>
> I've decided to not flood console with messages. If someone wants to
> debug why the driver doesn't probed he can define DEBUG.

Ok, is up to you.

Regards,
Ivan




\
 
 \ /
  Last update: 2014-09-25 22:01    [W:0.058 / U:1.244 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site