lkml.org 
[lkml]   [2014]   [Oct]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 16/20] rtc: omap: enable wake-up from power off
Date
The ALARM interrupt must not be disabled during shutdown in order to be
able to power up the system using an RTC alarm.

Signed-off-by: Johan Hovold <johan@kernel.org>
---
drivers/rtc/rtc-omap.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/rtc/rtc-omap.c b/drivers/rtc/rtc-omap.c
index f6c93f877857..cb5ef3c845d1 100644
--- a/drivers/rtc/rtc-omap.c
+++ b/drivers/rtc/rtc-omap.c
@@ -687,8 +687,15 @@ static SIMPLE_DEV_PM_OPS(omap_rtc_pm_ops, omap_rtc_suspend, omap_rtc_resume);
static void omap_rtc_shutdown(struct platform_device *pdev)
{
struct omap_rtc *rtc = platform_get_drvdata(pdev);
+ u8 mask;

- rtc_write(rtc, OMAP_RTC_INTERRUPTS_REG, 0);
+ /*
+ * Keep the ALARM interrupt enabled to allow the system to power up on
+ * alarm events.
+ */
+ mask = rtc_read(rtc, OMAP_RTC_INTERRUPTS_REG);
+ mask &= OMAP_RTC_INTERRUPTS_IT_ALARM;
+ rtc_write(rtc, OMAP_RTC_INTERRUPTS_REG, mask);
}

static struct platform_driver omap_rtc_driver = {
--
2.0.4


\
 
 \ /
  Last update: 2014-10-21 20:21    [W:0.315 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site