lkml.org 
[lkml]   [2007]   [Mar]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: bugs in kernel 2.6.21 (both two release candidates) and kernel 2.6.20
Date

Hi Uwe,

On Saturday 03 March 2007, Uwe Bugla wrote:
> Hi folks,
> the floppy mount error I mentioned is gone now in 2.6.21-rc2, and my kernel is smaller. Good decision to rip out Stephane's stuff, Linus!
> As I did not get a reply from Andrew I hope that the buggy stuff residing in 2.6.20-mm1 ( freezing my apache services
> - I already mentioned the problem some days ago - mm2 I did not try yet ) will never be pushed into vanilla mainline.
> I owe some old CDROM and CDRW devices manufactured by TEAC (bought somewhen in 1999): CDR 540 and CDRW 54.
> Those old CD devices sometimes get confused with drive seek errors and status errors shown in dmesg.
> The newer DVD devices (LG reading device and Yamakawa burning device) do not show those errors at all.
> As I have finished an enourmous project 6 weeks ago (transforming some 500 Audio CDs to MP3 format
> with kaudiocreator and lame 3.97 (320 kbit quality - preset insane) and then burning the material on DVDs)
> those old devices were an incredible help in some cases where the newer DVD devices refused to read some audio
> CDs without errors. That's why I do not want to kick them off at all. Never had those troubles with kernel 2.6.19 and former ones.

> Dmesg 1 says on my AMD machine with a CDR540 as /dev/hdd during boot process:
> hdd: media error (bad sector): status=0x51 { DriveReady SeekComplete Error }
> hdd: media error (bad sector): error=0x34 { AbortedCommand LastFailedSense=0x03 }
> ide: failed opcode was: unknown
> ATAPI device hdd:
> Error: Medium error -- (Sense key=0x03)
> (reserved error code) -- (asc=0x02, ascq=0x00)
> The failed "Read 10" packet command was:
> "28 00 00 00 00 10 00 00 02 00 00 00 00 00 00 00 "
> end_request: I/O error, dev hdd, sector 64

Hmm. why does it try to read sector 64 during boot?

Could you make sure that there are not configuration files/options incorrectly
referring to /dev/hdd (please grep you /etc and /boot for for "/dev/hdd")?

[ ... ]

> But even more crucial is this one:
> Dmesg 2 says on the Intel machine with a TEAC CDRW54 as /dev/hdd:
> hdd: status error: status=0x7f { DriveReady DeviceFault SeekComplete DataRequest CorrectedError Index Error }
> hdd: status error: error=0x7f { IllegalLengthIndication EndOfMedia AbortedCommand MediaChangeRequested LastFailedSense=0x07 }
> ide: failed opcode was: unknown
> For about 1 second the whole system hangs while /dev/hdd is executing some kind of reinitialization, just like as if you unconnect
> the data and the 12 V / 6V cable and reconnect them again while the machine is up and running.

It really looks like a hardware related problem (power supply/power cable).

> For a DVB-S record f. ex. the breakdown of the recording can be one consequence.
> Question: Can someone reading this please confirm these errors? Please take old CD devices to find out, not newer ones or even DVD devices!
> I am using the standard IDE driver with the following chipsets: Intel ICH4 and SIS 5513. And please take time, as these crucial errors do not happen
> immediately, but about 4 times in about 8 - 10 hours while the machine is up and running.

The "randomness" of the issue is another indicator that it could be power
related. Could it be that the issue happens when the system is rather busy?

> Yours sincerely and thanks for all your efforts
>
> Uwe
> P. S.: I do not think this is a hardware error as I did not have those problems with kernels <= 2.6.19.

I went through 2.6.19 -> 2.6.20 IDE changes and it is highly unlikely that
the breakage is caused by IDE driver. Anyway to be sure I've prepared a
patch for you:

http://kernel.org/pub/linux/kernel/people/bart/ide-2.6.20.patch

it contains all 2.6.19 -> 2.6.20 IDE changes - we need to know whether the
2.6.20 kernel with the above patch reversed (applied with -R) works.

[ If it still won't work with the patch applied that must be some other thing
and we are left with trying git bisect or a lot of unreliable guesswork. ]

Please also post (preferably by filling bug at http://bugzilla.kernel.org)
outputs of dmesg and lspci -vvvxxx commands from 2.6.19 and 2.6.20 so we can
check if anything changed in the way that ATA devices/hosts are programmed
on your systems between 2.6.19 and 2.6.20.

I'm also cc:ing our new ide-cd Maintainer (Hi Alan) who may shed some more
light on the problems.

PS please always cc: linux-ide mailing list on ATA problems, problems won't
get fixed if information about them doesn't reach the right people...

Thanks,
Bart
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-03-03 19:21    [W:0.138 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site