lkml.org 
[lkml]   [2024]   [May]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v1 2/2] scsi: ufs: qcom: Update the UIC Command Timeout
Date
Change the UIC command timeout to 2 seconds.
This extra time is to allow the uart occasionally print long
debug messages and logging from different modules during
product development. With the default hardcoded 500ms timeout,
the uart printing with interrupt disabled may cause the UIC command
interrupt get starved, resulting in a UIC command timeout and
eventually a watchdog timeout.
When a product development completes, the vendors may
select a different UIC command timeout as desired.

Signed-off-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
---
drivers/ufs/host/ufs-qcom.c | 3 +++
1 file changed, 3 insertions(+)

diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c
index 79f8cb3..4649e0f 100644
--- a/drivers/ufs/host/ufs-qcom.c
+++ b/drivers/ufs/host/ufs-qcom.c
@@ -49,6 +49,7 @@ enum {

#define QCOM_UFS_MAX_GEAR 4
#define QCOM_UFS_MAX_LANE 2
+#define QCOM_UIC_CMD_TIMEOUT_MS 2000

enum {
MODE_MIN,
@@ -1111,6 +1112,8 @@ static int ufs_qcom_init(struct ufs_hba *hba)
dev_warn(dev, "%s: failed to configure the testbus %d\n",
__func__, err);

+ hba->uic_cmd_timeout = QCOM_UIC_CMD_TIMEOUT_MS;
+
return 0;

out_variant_clear:
--
2.7.4

\
 
 \ /
  Last update: 2024-05-22 09:02    [W:0.068 / U:0.464 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site