lkml.org 
[lkml]   [2024]   [May]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] i2c: ocores: set IACK bit after core is enabled
Date
Setting IACK bit when core is disabled does not clear the "Interrupt Flag"
bit in the status register, and the interrupt remains pending.

Sometimes it causes failure for the very first message transfer, that is
usually a device probe.

Hence, set IACK bit after core is enabled to clear pending interrupt.

Fixes: 18f98b1e3147 ("[PATCH] i2c: New bus driver for the OpenCores I2C controller")
Signed-off-by: Grygorii Tertychnyi <grygorii.tertychnyi@leica-geosystems.com>
Acked-by: Peter Korsgaard <peter@korsgaard.com>
Cc: stable@vger.kernel.org
---
V1 -> V2: Added "Acked-by:", "Fixes:" and "Cc:" tags

drivers/i2c/busses/i2c-ocores.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c
index e106af83cef4..350ccfbe8634 100644
--- a/drivers/i2c/busses/i2c-ocores.c
+++ b/drivers/i2c/busses/i2c-ocores.c
@@ -442,8 +442,8 @@ static int ocores_init(struct device *dev, struct ocores_i2c *i2c)
oc_setreg(i2c, OCI2C_PREHIGH, prescale >> 8);

/* Init the device */
- oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_IACK);
oc_setreg(i2c, OCI2C_CONTROL, ctrl | OCI2C_CTRL_EN);
+ oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_IACK);

return 0;
}
--
2.43.0

\
 
 \ /
  Last update: 2024-05-20 17:40    [W:0.038 / U:1.212 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site