lkml.org 
[lkml]   [2024]   [Apr]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 8/9] drm/bridge: tfp410: Use fwnode API to acquire device properties
On Sun, Apr 28, 2024 at 02:43:20AM +0800, Sui Jingfeng wrote:
> Hi,
>
>
> On 2024/4/23 04:08, Dmitry Baryshkov wrote:
> > On Tue, Apr 23, 2024 at 03:19:02AM +0800, Sui Jingfeng wrote:
> > > Make this driver DT-independent by calling the freshly created helpers,
> > > which reduce boilerplate and open the door for otherwise use cases. No
> > > functional changes for DT based systems.
> > >
> > > Signed-off-by: Sui Jingfeng <sui.jingfeng@linux.dev>
> > > ---
> > > drivers/gpu/drm/bridge/ti-tfp410.c | 41 +++++++++++++++---------------
> > > 1 file changed, 21 insertions(+), 20 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/bridge/ti-tfp410.c b/drivers/gpu/drm/bridge/ti-tfp410.c
> > > index c7bef5c23927..58dc7492844f 100644
> > > --- a/drivers/gpu/drm/bridge/ti-tfp410.c
> > > +++ b/drivers/gpu/drm/bridge/ti-tfp410.c
> > > @@ -266,8 +266,9 @@ static const struct drm_bridge_timings tfp410_default_timings = {
> > > static int tfp410_parse_timings(struct tfp410 *dvi, bool i2c)
> > > {
> > > + struct fwnode_handle *fwnode = dev_fwnode(dvi->dev);
> > > struct drm_bridge_timings *timings = &dvi->timings;
> > > - struct device_node *ep;
> > > + struct fwnode_handle *ep;
> > > u32 pclk_sample = 0;
> > > u32 bus_width = 24;
> > > u32 deskew = 0;
> > > @@ -288,14 +289,14 @@ static int tfp410_parse_timings(struct tfp410 *dvi, bool i2c)
> > > * and EDGE pins. They are specified in DT through endpoint properties
> > > * and vendor-specific properties.
> > > */
> > > - ep = of_graph_get_endpoint_by_regs(dvi->dev->of_node, 0, 0);
> > > + ep = fwnode_graph_get_endpoint_by_id(fwnode, 0, 0, 0);
> > > if (!ep)
> > > return -EINVAL;
> > > /* Get the sampling edge from the endpoint. */
> > > - of_property_read_u32(ep, "pclk-sample", &pclk_sample);
> > > - of_property_read_u32(ep, "bus-width", &bus_width);
> > > - of_node_put(ep);
> > > + fwnode_property_read_u32(ep, "pclk-sample", &pclk_sample);
> > > + fwnode_property_read_u32(ep, "bus-width", &bus_width);
> > > + fwnode_handle_put(ep);
> > > timings->input_bus_flags = DRM_BUS_FLAG_DE_HIGH;
> > > @@ -324,7 +325,7 @@ static int tfp410_parse_timings(struct tfp410 *dvi, bool i2c)
> > > }
> > > /* Get the setup and hold time from vendor-specific properties. */
> > > - of_property_read_u32(dvi->dev->of_node, "ti,deskew", &deskew);
> > > + fwnode_property_read_u32(fwnode, "ti,deskew", &deskew);
> > > if (deskew > 7)
> > > return -EINVAL;
> > > @@ -336,12 +337,12 @@ static int tfp410_parse_timings(struct tfp410 *dvi, bool i2c)
> > > static int tfp410_init(struct device *dev, bool i2c)
> > > {
> > > - struct device_node *node;
> > > + struct fwnode_handle *fwnode = dev_fwnode(dev);
> > > struct tfp410 *dvi;
> > > int ret;
> > > - if (!dev->of_node) {
> > > - dev_err(dev, "device-tree data is missing\n");
> > > + if (!fwnode) {
> > > + dev_err(dev, "firmware data is missing\n");
> > > return -ENXIO;
> > > }
> > > @@ -352,8 +353,8 @@ static int tfp410_init(struct device *dev, bool i2c)
> > > dvi->dev = dev;
> > > dev_set_drvdata(dev, dvi);
> > > + drm_bridge_set_node(&dvi->bridge, fwnode);
> > > dvi->bridge.funcs = &tfp410_bridge_funcs;
> > > - dvi->bridge.of_node = dev->of_node;
> > > dvi->bridge.timings = &dvi->timings;
> > > dvi->bridge.type = DRM_MODE_CONNECTOR_DVID;
> > > @@ -362,15 +363,15 @@ static int tfp410_init(struct device *dev, bool i2c)
> > > return ret;
> > > /* Get the next bridge, connected to port@1. */
> > > - node = of_graph_get_remote_node(dev->of_node, 1, -1);
> > > - if (!node)
> > > - return -ENODEV;
> > > -
> > > - dvi->next_bridge = of_drm_find_bridge(node);
> > > - of_node_put(node);
> > > -
> > > - if (!dvi->next_bridge)
> > > + dvi->next_bridge = drm_bridge_find_next_bridge_by_fwnode(fwnode, 1);
> > > + if (IS_ERR(dvi->next_bridge)) {
> > > + ret = PTR_ERR(dvi->next_bridge);
> > > + dev_err(dev, "Error in founding the next bridge: %d\n", ret);
> > > + return ret;
> > Same comment regarding dev_err_probe().
> >
> > LGTM otherwise.
>
>
> My drm_bridge_find_next_bridge_by_fwnode() function won't return -EPROBE_DEFER,
> this is known for sure. this can be used as a prior(priori) knowledge. This is
> intentionally by design.
>
>
> Calling the dev_err_probe() just introduce extra overhead on non EPROBE_DEFER
> cases. Hence, It is useless to use dev_err_probe() at here.
>
>
> > > + } else if (!dvi->next_bridge) {
> > > + dev_dbg(dev, "Next bridge not found, deferring probe\n");
> > > return -EPROBE_DEFER;
> > Looking at the bolerplate code, I think it would be better to make
> > drm_bridge_find_next_bridge_by_fwnode() reutrn -EPROBE_DEFER on its own.
> >
> The drm_bridge_find_next_bridge_by_fwnode() function itself can not
> reliable detect if the driver(the remote bridge) already probed or not.
>
> Hence, as a core helper function, we can not guarantee that return
> -EPROBE_DEFER is always correct.
>
> While, return NULL is always correct. The NULL can stand for two meanings.
> One is that the next bridge is really don't exist, may happen when the
> caller provided a wrong fwnode argument.

Please take a look at drm_of_find_panel_or_bridge(). Returning specific
error code is always better than returning just NULL. As you have
pointed yourself, there are (at least) two cases when your function
returns NULL. Caller can not identify them unless the function returns
proper error code.

> Another case is that the next bridge exists but not probed yet, and
> drm_bridge_find_next_bridge_by_fwnode() can return NULL when it gets called
> too early.
>
> Therefore, it is better to left to the users of this function to process
> the NULL return value. As driver instances has some extra prior knowledge.
> And can be controlled by drm bridge driver author.

he driver has no prior knowledge if there is a remote fwnode/ofnode or
if there is none.

>
> > > + }
> > > /* Get the powerdown GPIO. */
> > > dvi->powerdown = devm_gpiod_get_optional(dev, "powerdown",
> > > @@ -422,10 +423,10 @@ static struct platform_driver tfp410_platform_driver = {
> > > /* There is currently no i2c functionality. */
> > > static int tfp410_i2c_probe(struct i2c_client *client)
> > > {
> > > + struct fwnode_handle *fwnode = dev_fwnode(&client->dev);
> > > int reg;
> > > - if (!client->dev.of_node ||
> > > - of_property_read_u32(client->dev.of_node, "reg", &reg)) {
> > > + if (!fwnode || fwnode_property_read_u32(fwnode, "reg", &reg)) {
> > > dev_err(&client->dev,
> > > "Can't get i2c reg property from device-tree\n");
> > > return -ENXIO;
> > > --
> > > 2.34.1
> > >
> --
> Best regards,
> Sui
>

--
With best wishes
Dmitry

\
 
 \ /
  Last update: 2024-04-27 21:17    [W:0.458 / U:0.620 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site