lkml.org 
[lkml]   [2024]   [Apr]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 8/9] drm/bridge: tfp410: Use fwnode API to acquire device properties
On Tue, Apr 23, 2024 at 03:19:02AM +0800, Sui Jingfeng wrote:
> Make this driver DT-independent by calling the freshly created helpers,
> which reduce boilerplate and open the door for otherwise use cases. No
> functional changes for DT based systems.
>
> Signed-off-by: Sui Jingfeng <sui.jingfeng@linux.dev>
> ---
> drivers/gpu/drm/bridge/ti-tfp410.c | 41 +++++++++++++++---------------
> 1 file changed, 21 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/ti-tfp410.c b/drivers/gpu/drm/bridge/ti-tfp410.c
> index c7bef5c23927..58dc7492844f 100644
> --- a/drivers/gpu/drm/bridge/ti-tfp410.c
> +++ b/drivers/gpu/drm/bridge/ti-tfp410.c
> @@ -266,8 +266,9 @@ static const struct drm_bridge_timings tfp410_default_timings = {
>
> static int tfp410_parse_timings(struct tfp410 *dvi, bool i2c)
> {
> + struct fwnode_handle *fwnode = dev_fwnode(dvi->dev);
> struct drm_bridge_timings *timings = &dvi->timings;
> - struct device_node *ep;
> + struct fwnode_handle *ep;
> u32 pclk_sample = 0;
> u32 bus_width = 24;
> u32 deskew = 0;
> @@ -288,14 +289,14 @@ static int tfp410_parse_timings(struct tfp410 *dvi, bool i2c)
> * and EDGE pins. They are specified in DT through endpoint properties
> * and vendor-specific properties.
> */
> - ep = of_graph_get_endpoint_by_regs(dvi->dev->of_node, 0, 0);
> + ep = fwnode_graph_get_endpoint_by_id(fwnode, 0, 0, 0);
> if (!ep)
> return -EINVAL;
>
> /* Get the sampling edge from the endpoint. */
> - of_property_read_u32(ep, "pclk-sample", &pclk_sample);
> - of_property_read_u32(ep, "bus-width", &bus_width);
> - of_node_put(ep);
> + fwnode_property_read_u32(ep, "pclk-sample", &pclk_sample);
> + fwnode_property_read_u32(ep, "bus-width", &bus_width);
> + fwnode_handle_put(ep);
>
> timings->input_bus_flags = DRM_BUS_FLAG_DE_HIGH;
>
> @@ -324,7 +325,7 @@ static int tfp410_parse_timings(struct tfp410 *dvi, bool i2c)
> }
>
> /* Get the setup and hold time from vendor-specific properties. */
> - of_property_read_u32(dvi->dev->of_node, "ti,deskew", &deskew);
> + fwnode_property_read_u32(fwnode, "ti,deskew", &deskew);
> if (deskew > 7)
> return -EINVAL;
>
> @@ -336,12 +337,12 @@ static int tfp410_parse_timings(struct tfp410 *dvi, bool i2c)
>
> static int tfp410_init(struct device *dev, bool i2c)
> {
> - struct device_node *node;
> + struct fwnode_handle *fwnode = dev_fwnode(dev);
> struct tfp410 *dvi;
> int ret;
>
> - if (!dev->of_node) {
> - dev_err(dev, "device-tree data is missing\n");
> + if (!fwnode) {
> + dev_err(dev, "firmware data is missing\n");
> return -ENXIO;
> }
>
> @@ -352,8 +353,8 @@ static int tfp410_init(struct device *dev, bool i2c)
> dvi->dev = dev;
> dev_set_drvdata(dev, dvi);
>
> + drm_bridge_set_node(&dvi->bridge, fwnode);
> dvi->bridge.funcs = &tfp410_bridge_funcs;
> - dvi->bridge.of_node = dev->of_node;
> dvi->bridge.timings = &dvi->timings;
> dvi->bridge.type = DRM_MODE_CONNECTOR_DVID;
>
> @@ -362,15 +363,15 @@ static int tfp410_init(struct device *dev, bool i2c)
> return ret;
>
> /* Get the next bridge, connected to port@1. */
> - node = of_graph_get_remote_node(dev->of_node, 1, -1);
> - if (!node)
> - return -ENODEV;
> -
> - dvi->next_bridge = of_drm_find_bridge(node);
> - of_node_put(node);
> -
> - if (!dvi->next_bridge)
> + dvi->next_bridge = drm_bridge_find_next_bridge_by_fwnode(fwnode, 1);
> + if (IS_ERR(dvi->next_bridge)) {
> + ret = PTR_ERR(dvi->next_bridge);
> + dev_err(dev, "Error in founding the next bridge: %d\n", ret);
> + return ret;

Same comment regarding dev_err_probe().

LGTM otherwise.

> + } else if (!dvi->next_bridge) {
> + dev_dbg(dev, "Next bridge not found, deferring probe\n");
> return -EPROBE_DEFER;

Looking at the bolerplate code, I think it would be better to make
drm_bridge_find_next_bridge_by_fwnode() reutrn -EPROBE_DEFER on its own.


> + }
>
> /* Get the powerdown GPIO. */
> dvi->powerdown = devm_gpiod_get_optional(dev, "powerdown",
> @@ -422,10 +423,10 @@ static struct platform_driver tfp410_platform_driver = {
> /* There is currently no i2c functionality. */
> static int tfp410_i2c_probe(struct i2c_client *client)
> {
> + struct fwnode_handle *fwnode = dev_fwnode(&client->dev);
> int reg;
>
> - if (!client->dev.of_node ||
> - of_property_read_u32(client->dev.of_node, "reg", &reg)) {
> + if (!fwnode || fwnode_property_read_u32(fwnode, "reg", &reg)) {
> dev_err(&client->dev,
> "Can't get i2c reg property from device-tree\n");
> return -ENXIO;
> --
> 2.34.1
>

--
With best wishes
Dmitry

\
 
 \ /
  Last update: 2024-04-22 22:08    [W:0.149 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site