Messages in this thread | | | From | André Draszik <> | Subject | [PATCH 0/2] enable USB on Pixel 6 (Oriole) | Date | Tue, 23 Apr 2024 21:52:47 +0100 |
| |
These patches enable USB in peripheral mode on Pixel 6.
We can only support peripheral mode at this stage, as the MAX77759 TCPCI controller used on Pixel 6 to do the role selection doesn't have a(n upstream) Linux driver. Therefore the role is defaulted to peripheral without any endpoints / ports.
For the same reason, we can not detect the orientation of a SS USB-C cable and therefore it will only establish a link in SS mode in one of the possible orientations of the cable. In all other cases, the link will be HS.
This series has a dependency on other patches, please see below.
I have mainly tested this as CDC ECM Ethernet device using the following:
mount -t configfs configfs /sys/kernel/config/ modprobe libcomposite modprobe usb_f_ecm mkdir /sys/kernel/config/usb_gadget/g3 cd /sys/kernel/config/usb_gadget/g3
echo 0xadad > idVendor echo 0xddaa > idProduct mkdir strings/0x409 echo 01234567 > strings/0x409/serialnumber echo ADADAD > strings/0x409/manufacturer cat /proc/device-tree/model > strings/0x409/product # create the function (name must match a usb_f_<name> module such as 'acm') mkdir functions/ecm.usb0 # stable MAC addresses echo "6e:27:3a:b9:40:87" > functions/ecm.usb0/dev_addr echo "ca:49:84:b0:3b:bc" > functions/ecm.usb0/host_addr
mkdir configs/c.1 ln -s functions/ecm.usb0 configs/c.1/ echo $(ls -1 /sys/class/udc/) > UDC
ifconfig usb0 192.168.1.2 up
at which point the other side should detect it and network communication becomes possible (once the other side also configures its network interface).
Due to the clock IDs, this series depends on the bindings patch "dt-bindings: clock: google,gs101-clock: add HSI0 clock management unit" of the series in https://lore.kernel.org/r/20240423-hsi0-gs101-v1-0-2c3ddb50c720@linaro.org
The bindings for USB and USB-phy have been proposed as part of: https://lore.kernel.org/r/20240423-usb-dwc3-gs101-v1-0-2f331f88203f@linaro.org and https://lore.kernel.org/r/20240423-usb-phy-gs101-v1-0-ebdcb3ac174d@linaro.org respectively.
Signed-off-by: André Draszik <andre.draszik@linaro.org> --- André Draszik (2): arm64: dts: exynos: gs101: add USB & USB-phy nodes arm64: dts: exynos: gs101-oriole: enable USB on this board
arch/arm64/boot/dts/exynos/google/gs101-oriole.dts | 24 +++++++++++++ arch/arm64/boot/dts/exynos/google/gs101.dtsi | 41 ++++++++++++++++++++++ 2 files changed, 65 insertions(+) --- base-commit: a59668a9397e7245b26e9be85d23f242ff757ae8 change-id: 20240423-usb-dts-gs101-4269e0177c0f
Best regards, -- André Draszik <andre.draszik@linaro.org>
| |