lkml.org 
[lkml]   [2024]   [Apr]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/1] arm64: dts: imx8mp: Enable HDMI on TQMa8MPxL/MBa8MPxL
Date
Enable HDMI nodes and add the output connector.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
.../freescale/imx8mp-tqma8mpql-mba8mpxl.dts | 38 +++++++++++++++++++
1 file changed, 38 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
index 86d3da36e4f3e..c51ed7d991d18 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
@@ -135,6 +135,18 @@ led-2 {
};
};

+ hdmi-connector {
+ compatible = "hdmi-connector";
+ label = "X44";
+ type = "a";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&hdmi_tx_out>;
+ };
+ };
+ };
+
display: display {
/*
* Display is not fixed, so compatible has to be added from
@@ -470,6 +482,28 @@ &gpio5 {
"", "", "", "";
};

+&hdmi_pvi {
+ status = "okay";
+};
+
+&hdmi_tx {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hdmi>;
+ status = "okay";
+
+ ports {
+ port@1 {
+ hdmi_tx_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+ };
+ };
+};
+
+&hdmi_tx_phy {
+ status = "okay";
+};
+
&i2c2 {
clock-frequency = <384000>;
pinctrl-names = "default", "gpio";
@@ -531,6 +565,10 @@ &i2c6 {
status = "okay";
};

+&lcdif3 {
+ status = "okay";
+};
+
&pcf85063 {
/* RTC_EVENT# is connected on MBa8MPxL */
pinctrl-names = "default";
--
2.34.1

\
 
 \ /
  Last update: 2024-05-27 16:32    [W:0.446 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site