lkml.org 
[lkml]   [2024]   [Jan]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
SubjectRe: [PATCH] RDMA/device: Fix a race between mad_client and cm_client init
From
On 2024/1/2 16:58, Leon Romanovsky wrote:
> On Mon, Jan 01, 2024 at 07:43:35PM -0800, Shifeng Li wrote:
>> The mad_client will be initialized in enable_device_and_get(), while the
>> devices_rwsem will be downgraded to a read semaphore. There is a window
>> that leads to the failed initialization for cm_client, since it can not
>> get matched mad port from ib_mad_port_list, and the matched mad port will
>> be added to the list after that.
>>
>> mad_client | cm_client
>> ------------------|--------------------------------------------------------
>> ib_register_device|
>> enable_device_and_get
>> down_write(&devices_rwsem)
>> xa_set_mark(&devices, DEVICE_REGISTERED)
>> downgrade_write(&devices_rwsem)
>> |
>> |ib_cm_init
>> |ib_register_client(&cm_client)
>> |down_read(&devices_rwsem)
>> |xa_for_each_marked (&devices, DEVICE_REGISTERED)
>> |add_client_context
>> |cm_add_one
>> |ib_register_mad_agent
>> |ib_get_mad_port
>> |__ib_get_mad_port
>> |list_for_each_entry(entry, &ib_mad_port_list, port_list)
>> |return NULL
>> |up_read(&devices_rwsem)
>> |
>> add_client_context|
>> ib_mad_init_device|
>> ib_mad_port_open |
>> list_add_tail(&port_priv->port_list, &ib_mad_port_list)
>> up_read(&devices_rwsem)
>> |
>
> How is this stack possible?
>
> ib_register_device() is called by drivers and happens much later than ib_cm_init().
>

I've caught the stack and err log as follows, ib_mad_init_device() called after
cm_add_one().

[ 98.281786] CPU: 18 PID: 30079 Comm: modprobe Kdump: loaded
[ 98.281787] Call Trace:
[ 98.281790] dump_stack+0x71/0xab
[ 98.281805] ib_register_mad_agent+0x1c6/0x27f0 [ib_core]
[ 98.281840] cm_add_one+0x4b0/0x9d0 [ib_cm]
[ 98.281865] add_client_context+0x2b9/0x380 [ib_core]
[ 98.281890] ib_register_client+0x22a/0x2a0 [ib_core]
[ 98.281908] __init_backport+0x12f/0x1000 [ib_cm]
[ 98.281912] do_one_initcall+0x87/0x2e2
[ 98.281926] do_init_module+0x1c3/0x5f7
[ 98.281928] load_module+0x4fe0/0x68d0
[ 98.281945] __do_sys_finit_module+0x14d/0x180
[ 98.281952] do_syscall_64+0xa0/0x370
[ 98.281957] entry_SYSCALL_64_after_hwframe+0x65/0xca
[ 98.281958] RIP: 0033:0x7f51d3a4373d
[ 98.281961] RSP: 002b:00007ffceb925938 EFLAGS: 00000202 ORIG_RAX: 0000000000000139
[ 98.281964] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f51d3a4373d
[ 98.281965] RDX: 0000000000000000 RSI: 0000000001636b70 RDI: 0000000000000003
[ 98.281966] RBP: 00007ffceb925950 R08: 0000000000000000 R09: 0000000001636b70
[ 98.281967] R10: 0000000000000003 R11: 0000000000000202 R12: 0000000000402410
[ 98.281968] R13: 00007ffceb926e60 R14: 0000000000000000 R15: 0000000000000000

[ 98.281977] infiniband mlx5_1: ib_register_mad_agent: Invalid port 1

[ 98.349040] CPU: 38 PID: 29896 Comm: modprobe Kdump: loaded
[ 98.349043] Call Trace:
[ 98.349053] dump_stack+0x71/0xab
[ 98.349076] ib_register_mad_agent+0x1c6/0x27f0 [ib_core]
[ 98.349149] ib_agent_port_open+0xe2/0x2d0 [ib_core]
[ 98.349164] ib_mad_init_device+0x818/0x1d70 [ib_core]
[ 98.349197] add_client_context+0x2b9/0x380 [ib_core]
[ 98.349221] enable_device_and_get+0x1ab/0x340 [ib_core]
[ 98.349292] ib_register_device+0xcbf/0xfd0 [ib_core]
[ 98.349355] __mlx5_ib_add+0x44/0xf0 [mlx5_ib]
[ 98.349404] mlx5_add_device+0xc3/0x280 [mlx5_core]
[ 98.349434] mlx5_register_interface+0x109/0x190 [mlx5_core]
[ 98.349442] do_one_initcall+0x87/0x2e2
[ 98.349460] do_init_module+0x1c3/0x5f7
[ 98.349462] load_module+0x4fe0/0x68d0
[ 98.349481] __do_sys_init_module+0x1f9/0x220
[ 98.349486] do_syscall_64+0xa0/0x370
[ 98.349492] entry_SYSCALL_64_after_hwframe+0x65/0xca
[ 98.349494] RIP: 0033:0x7fbc327faa7a
[ 98.349500] RSP: 002b:00007fff890df7f8 EFLAGS: 00000202 ORIG_RAX: 00000000000000af
[ 98.349502] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fbc327faa7a
[ 98.349503] RDX: 00000000004250c0 RSI: 00000000001b0230 RDI: 00007fbc31919010
[ 98.349505] RBP: 00007fff890df860 R08: 00000000025045b0 R09: 0000000000000000
[ 98.349506] R10: 00000000001b0230 R11: 0000000000000202 R12: 0000000000402410
[ 98.349507] R13: 00007fff890e0cf0 R14: 0000000000000000 R15: 0000000000000000

Thanks

> Thanks
>
>>
>> Fix it by using the devices_rwsem write semaphore to protect the mad_client
>> init flow in enable_device_and_get().
>>
>> Fixes: d0899892edd0 ("RDMA/device: Provide APIs from the core code to help unregistration")
>> Cc: Shifeng Li <lishifeng1992@126.com>
>> Signed-off-by: Shifeng Li <lishifeng@sangfor.com.cn>
>> ---
>> drivers/infiniband/core/device.c | 8 +-------
>> 1 file changed, 1 insertion(+), 7 deletions(-)
>>
>> diff --git a/drivers/infiniband/core/device.c b/drivers/infiniband/core/device.c
>> index 67bcea7a153c..85782786993d 100644
>> --- a/drivers/infiniband/core/device.c
>> +++ b/drivers/infiniband/core/device.c
>> @@ -1315,12 +1315,6 @@ static int enable_device_and_get(struct ib_device *device)
>> down_write(&devices_rwsem);
>> xa_set_mark(&devices, device->index, DEVICE_REGISTERED);
>>
>> - /*
>> - * By using downgrade_write() we ensure that no other thread can clear
>> - * DEVICE_REGISTERED while we are completing the client setup.
>> - */
>> - downgrade_write(&devices_rwsem);
>> -
>> if (device->ops.enable_driver) {
>> ret = device->ops.enable_driver(device);
>> if (ret)
>> @@ -1337,7 +1331,7 @@ static int enable_device_and_get(struct ib_device *device)
>> if (!ret)
>> ret = add_compat_devs(device);
>> out:
>> - up_read(&devices_rwsem);
>> + up_write(&devices_rwsem);
>> return ret;
>> }
>>
>> --
>> 2.25.1
>>
>>
>


\
 
 \ /
  Last update: 2024-01-02 12:54    [W:0.072 / U:0.640 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site