lkml.org 
[lkml]   [2023]   [Sep]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] serial: stm32: add support for break control
Date
From: Erwan Le Ray <erwan.leray@foss.st.com>

Add support for break control to the stm32 serial driver.

Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
---
drivers/tty/serial/stm32-usart.c | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index 5e9cf0c48813..d03ec69d79fc 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -1047,9 +1047,20 @@ static void stm32_usart_stop_rx(struct uart_port *port)
stm32_usart_clr_bits(port, ofs->cr3, stm32_port->cr3_irq);
}

-/* Handle breaks - ignored by us */
static void stm32_usart_break_ctl(struct uart_port *port, int break_state)
{
+ struct stm32_port *stm32_port = to_stm32_port(port);
+ const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs;
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ if (break_state)
+ stm32_usart_set_bits(port, ofs->rqr, USART_RQR_SBKRQ);
+ else
+ stm32_usart_clr_bits(port, ofs->rqr, USART_RQR_SBKRQ);
+
+ spin_unlock_irqrestore(&port->lock, flags);
}

static int stm32_usart_startup(struct uart_port *port)
--
2.25.1
\
 
 \ /
  Last update: 2023-09-06 17:17    [W:0.090 / U:0.708 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site