Messages in this thread Patch in this message | | | From | Bartosz Golaszewski <> | Subject | [PATCH 7/9] arm64: dts: qcom: sa8775p-ride: add the second SGMII PHY | Date | Mon, 7 Aug 2023 21:35:05 +0200 |
| |
From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Add a second SGMII PHY that will be used by EMAC1 on sa8775p-ride.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> --- arch/arm64/boot/dts/qcom/sa8775p-ride.dts | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts index 55feaac7fa1b..5b48066f312a 100644 --- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts +++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts @@ -286,6 +286,14 @@ sgmii_phy0: phy@8 { reset-gpios = <&pmm8654au_2_gpios 8 GPIO_ACTIVE_LOW>; reset-deassert-us = <70000>; }; + + sgmii_phy1: phy@a { + compatible = "ethernet-phy-id0141.0dd4"; + reg = <0xa>; + device_type = "ethernet-phy"; + reset-gpios = <&pmm8654au_2_gpios 9 GPIO_ACTIVE_LOW>; + reset-deassert-us = <70000>; + }; }; mtl_rx_setup: rx-queues-config { -- 2.39.2
| |