Messages in this thread | ![/](/images/icornerl.gif) | | Date | Thu, 20 Jul 2023 18:00:15 +0200 | From | Andrew Lunn <> | Subject | Re: [PATCH v5 1/2] dt-bindings: net: motorcomm: Add pad driver strength cfg |
| |
> + motorcomm,rx-clk-drv-microamp: > + description: | > + drive strength of rx_clk rgmii pad. > + The YT8531 RGMII LDO voltage supports 1.8V/3.3V, and the LDO voltage can > + be configured with hardware pull-up resistors to match the SOC voltage > + (usually 1.8V). > + The software can read the registers to obtain the LDO voltage and configure > + the legal drive strength(curren). > + ===================================================== > + | voltage | curren Available (uA) |
current has a t.
> + ===================================================== > + | voltage | curren Available (uA) |
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Andrew
| ![\](/images/icornerr.gif) |